Summary
Overview
Work History
Education
Skills
Certification
References
Timeline
Generic

Zachary Hughes

Medford,OR

Summary

Highly-motivated with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills. Committed with a history of meeting company needs with consistent and organized practices. Skilled in working under pressure and adapting to new situations and challenges to best enhance the organizational brand. Dedicated and adaptable professional with a proactive attitude and the ability to learn quickly. Strong work ethic and effective communication skills. Eager to contribute to a dynamic team and support organizational goals.

Overview

25
25
years of professional experience
1
1
Certification

Work History

Boiler Technician- Bowler Maker

oregon boiler
Central Point, OR
10.2021 - Current
  • Analyzed readings from pressure gauges and thermometers to determine operational performance of the boiler system.
  • Repaired and replaced defective boiler components such as valves, gaskets, seals, tubes, and piping.
  • Provided technical advice on how best to maintain the boiler system in good working condition.
  • Conducted monthly inspections of boiler rooms to ensure safe operation.
  • Replaced worn out or damaged parts as needed according to manufacturer specifications.
  • Adjusted fuel supply systems to maintain optimal combustion efficiency levels.
  • Ensured that all safety regulations were followed while performing tasks.
  • Resolved customer complaints regarding their heating systems in a timely manner.
  • Calibrated instruments used for testing temperature, pressure and other variables related to the boiler system.
  • Inspected boilers for safety compliance and defects.
  • Maintained accurate records of maintenance activities performed on each unit serviced.
  • Assisted with designing new systems or retrofitting existing ones as needed.
  • Recorded data from tests performed during inspections into a logbook for future reference.
  • Monitored water levels within the boiler system regularly to ensure they remain within acceptable limits.
  • Performed emergency repairs when necessary in order to keep the boilers running properly.
  • Cleaned burners, flues, tanks, pipes and other components using appropriate tools.
  • Installed new parts in accordance with manufacturer's instructions.
  • Performed preventative maintenance on boilers, pumps and other related equipment.
  • Checked all gauges, meters, and controls to verify proper functioning of the system.
  • Examined all connections between gas lines and electrical wiring for any signs of damage or wear.
  • Troubleshot problems with boilers and identified root causes of malfunctions.
  • Input maintenance, performance and fuel consumption records into computerized maintenance management system for reporting to administration and engineer analysis.
  • Removed soot and debris from inside boiler, replaced water filters and treated for mineral deposits and cleaned burners in anticipation of annual equipment inspections.
  • Operated refrigeration, hydraulic, water recirculation systems, cooling towers and other systems relating to regulation of boiler operations and facility heating and cooling requirements.
  • Performed routine preventive maintenance on boilers according to company schedule, reducing number of service calls to outside technicians.
  • Installed replacement burners, air filters, gauges and other boiler components using hand tools to maintain optimal efficiency and prevent heat supply interruption.
  • Adjusted boiler valves to establish appropriate air and water flow levels and control flow of liquid fuel into burners to regulate temperatures.
  • Monitored gauges and meters to record temperature fluctuations and document variances in airflow and fuel consumption.
  • Measured air quality of boiler exhaust systems and calibrated equipment for compliance with OSHA and company-mandated safe work environment regulations.
  • Took samples of water from boilers and cooling towers to perform standardized tests.
  • Improved efficiency and reduced costs by recommending new processes and identifying problems.
  • Developed and implemented best practices, quality assurance standards and project management procedures.
  • Maintained chilled water systems, high pressure boilers, cooling towers and hydraulic pumps.
  • Performed maintenance services to correct and prevent problems.
  • Calibrated or adjusted equipment using calipers, micrometers or ring gauges.
  • Evaluated industrial operations for compliance with permits or regulations.
  • Managed procedures for start-up, daily operations and shutdowns.
  • Interpreted gauges, charts and various testing devices related to boiler and chiller operation.
  • Prepared reports detailing data analysis along with prospective solutions, benefits and costs.
  • Fired wood- and coal-burning furnaces with stokers as well as gas- and oil-fed boilers by starting and regulating fuel supply through automated gas feeds and oil pumps.

Maintenance Engineer

Treetop
Medford, OR
07.2009 - 10.2021
  • Assessed the need for spare parts inventory and placed orders accordingly.
  • Responded quickly to emergency breakdowns in order to minimize disruption of production.
  • Investigated root causes of recurring problems within the plant environment.
  • Conducted regular inspections of facility machinery for signs of wear or damage.
  • Created preventative maintenance schedules for all relevant machinery.
  • Replaced worn parts or components in accordance with manufacturer specifications.
  • Carried out routine lubrication tasks to reduce friction between moving parts.
  • Monitored and adjusted systems to ensure optimal performance levels.
  • Ensured compliance with safety regulations during all maintenance operations.
  • Performed preventive and corrective maintenance on a variety of equipment, such as pumps, motors, conveyors, and valves.
  • Troubleshot electrical systems using digital multimeters and other testing instruments.
  • Diagnosed mechanical problems and identified appropriate solutions.
  • Reviewed blueprints, schematics, drawings, technical manuals for troubleshooting purposes.
  • Developed detailed reports on equipment malfunctions or repairs performed.
  • Repaired malfunctioning components using hand tools, power tools, and other specialized equipment.
  • Maintained records of scheduled maintenance activities.
  • Provided technical support to other team members when needed.
  • Assisted in the installation of new equipment according to design specifications.
  • Maintained equipment performance by cleaning and lubricating components.
  • Efficiently executed shut downs for planned maintenance.
  • Managed emergency repairs on critical systems, minimizing downtime and production losses.
  • Ensured strict adherence to health and safety regulations, reducing the risk of workplace incidents.
  • Conducted routine inspections of facilities and equipment to identify and address issues proactively.
  • Administered the maintenance budget, optimizing resource allocation and expenditure control.
  • Contacted suppliers and equipment manufacturers to obtain specialized operational information.
  • Diagnosed and repaired mechanical issues according to industry standards.
  • Liaised with regulatory bodies for compliance audits and inspections, ensuring adherence to legal and industry standards.
  • Implemented preventive maintenance schedules for various machinery to ensure operational efficiency.
  • Assessed training needs of maintenance personnel and organized relevant skill development sessions.
  • Updated maintenance logs and reports accurately, facilitating effective tracking and planning.
  • Evaluated new technology and tools for potential application in maintenance operations, driving innovation.
  • Provided technical advice and support to management and other departments on maintenance-related matters.
  • Participated in the development and execution of energy-saving initiatives, reducing operational costs.
  • Collaborated with cross-functional teams to support facility upgrades and expansions.
  • Analyzed failure trends to prevent recurrence and improve system reliability.
  • Tested and inspected machinery or equipment to diagnose machine malfunctions.
  • Negotiated maintenance contracts, ensuring favorable terms and reliable service provision.
  • Supervised junior maintenance staff, providing training and guidance on best practices and safety protocols.
  • Led the installation of new equipment, ensuring compliance with technical specifications and safety standards.
  • Coordinated with external vendors for the procurement of parts and services, ensuring cost-effective solutions.
  • Revised and improved maintenance procedures, enhancing team efficiency and service quality.
  • Coordinated shutdowns and turnarounds for major maintenance activities, minimizing operational impact.
  • Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.
  • Implemented troubleshooting techniques to resolve issue.
  • Routinely inspected equipment for preventive and emergency maintenance needs.
  • Diagnosed and corrected mechanical problems using blueprints, repair manuals or parts catalogs.
  • Performed routine maintenance by inspecting drives, motors or belts.
  • Set up and operated machine tools to repair or fabricate jigs, fixtures or tools.
  • Assembled, installed or repaired electrical or electronic components and pipe systems.
  • Maintained or repaired specialized equipment or machinery.
  • Aligned and balanced new equipment after installation.
  • Planned and laid out repair work using diagrams, drawings or schematic diagrams.
  • Estimated costs to repair machinery, equipment or building structures.
  • Installed equipment to improve energy or operational efficiency of residential or commercial buildings.
  • Inspected, operated or tested machinery or equipment to diagnose machine malfunctions.
  • Cleaned or lubricated shafts, bearings or other parts of machinery.
  • Adjusted devices or control instruments using hand tools, levels or straightedges.
  • Repaired machines, equipment or structures using tools or equipment.
  • Designed equipment to aid repair or maintenance of machines, mechanical equipment or building structures.
  • Dismantled machines, equipment, or devices to access and remove defective parts.
  • Recorded type and cost of maintenance or repair work.
  • Ordered parts, supplies or equipment from catalogs or suppliers.

Lead Welder

P.O.D.S
Medford, OR
06.2005 - 11.2008
  • Established work schedules for team members based on priority of tasks.
  • Provided technical support to other departments when needed.
  • Communicated with vendors regarding material orders or special requests for custom jobs.
  • Calculated heat input levels required for specific types of welds utilizing knowledge of metallurgy.
  • Performed welding operations on metals such as aluminum, stainless steel and carbon steel using TIG, MIG and flux core arc welding techniques.
  • Performed preventative maintenance on all welding equipment including torches, regulators, hoses.
  • Supervised other welders in the shop to ensure quality standards were met.
  • Created jigs and fixtures for welding projects that require accuracy or repeatability.
  • Maintained a safe work environment by adhering to safety protocols and regulations.
  • Developed quality control measures for inspecting finished products prior to shipment.
  • Analyzed blueprints, drawings and specifications to determine job requirements.
  • Utilized various tools such as grinders, saws, drills and measuring devices during fabrication process.
  • Repaired broken parts or fabricate new components from raw materials using cutting torches and plasma cutters.
  • Developed welding plans and procedures for production processes.
  • Assisted in troubleshooting problems related to welding processes or equipment malfunctions.
  • Safely ignited torches and monitored surroundings to proactively identify hazards.
  • Welded fabrication materials, continuously checking for safety and quality.
  • Cleaned and inspected parts and assemblies at each production stage and documented production defects.
  • Adjusted weld machines to correct settings for precision and waste reduction.
  • Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
  • Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
  • Melted and applied solder along adjoining edges of workpieces to solder joints.
  • Recognized, set up, and operated shielded metal arc and gas metal arc welding equipment.
  • Detected faulty operation of equipment or defective materials and notified supervisors.
  • Aligned and clamped workpieces using rules, squares or hand tools.
  • Welded components in flat, vertical, or overhead positions.
  • Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
  • Selected and installed torches, filler rods and flux according to welding chart specifications.
  • Marked or tagged material with job number, piece marks and other identifying marks.
  • Measured workpieces with straightedges or templates to conform with specifications.
  • Determined equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.

Job Foreman

Tim's Construction
Crescent City, CA
06.1999 - 10.2004
  • Coordinated with the owner or general contractor regarding changes in scope of work, budget, and timeline.
  • Organized and directed work crews to ensure efficient completion of tasks within established time frames.
  • Resolved conflicts between subcontractors and supervised personnel.
  • Developed and implemented corrective action plans for any problems that arose during construction process.
  • Provided technical guidance to supervisors and workers on the job site.
  • Scheduled inspections as required by local building codes prior to project completion.
  • Inspected completed work for quality assurance purposes.
  • Directed daily activities of personnel assigned to a specific project.
  • Tracked material costs against budget estimates to ensure accuracy of billing.
  • Maintained accurate records of labor hours worked by each crew member.
  • Monitored construction progress, tracked materials, and maintained records of job costs.
  • Negotiated contracts with suppliers for materials needed to complete projects.
  • Conducted regular safety meetings with employees to review procedures and policies.
  • Addressed customer complaints promptly and professionally.
  • Supervised the installation of electrical wiring, plumbing fixtures, HVAC systems.
  • Established good working relationships with vendors, subcontractors, customers, and other stakeholders involved in projects.
  • Ensured safety regulations were followed by all workers on site.
  • Checked project details to verify job site materials and equipment.
  • Complied with federal and company regulations to maintain high level of job site safety.
  • Managed sites by focusing on safety, operations and productivity.
  • Supervised projects to uphold schedule requirements and quality demands.
  • Established expectations and motivated crews to consistently meet or beat goals.
  • Tracked and reported units and labor hours prior to submission of timecards.
  • Communicated with suppliers and coordinated delivery of supplies to job sites.
  • Planned and managed manpower and resource requirements to support project activities.
  • Managed workers at various experience levels in construction and restoration projects.
  • Trained and monitored employees to teach daily tasks and improve performance.
  • Reviewed project blueprints and specifications to determine number of workers needed to complete jobs.
  • Kept production team moving forward for progress in daily site operations.
  • Delegated duties to employees based on skillset.
  • Created work crew schedules and delegated assignments.
  • Allocated material and labor resources to promote on-time and under-budget project completion.
  • Established and enforced procedures and work standards, promoting team performance and safety.
  • Provided leadership, insight and mentoring to newly hired employees to supply knowledge of various company programs.

Education

Boiler Operator Certification - Mechanical Engineering

RCC
White City, OR
06-2021

High School Diploma -

Paragon High School
Crescent City, CA
06-2000

Skills

  • System Troubleshooting
  • Pressure testing
  • Electrical Wiring
  • Instrument Calibration
  • Energy efficiency optimization
  • Relationship Building
  • Interpersonal Communication
  • Daily logging
  • Professionalism
  • Adaptability and Flexibility
  • Time Management
  • Technical Troubleshooting
  • Problem-Solving
  • Adaptability
  • Reliability
  • Task Prioritization
  • Professional Demeanor
  • Decision-Making
  • Continuous Improvement
  • Multitasking
  • Coordinating maintenance schedules
  • Problem-solving abilities
  • Teamwork and Collaboration
  • Self Motivation
  • Time management abilities
  • Goal Setting

Certification

  • MSHA safety training.
  • OSHA 10 training
  • heavy equipment training.

References

References available upon request.

Timeline

Boiler Technician- Bowler Maker

oregon boiler
10.2021 - Current

Maintenance Engineer

Treetop
07.2009 - 10.2021

Lead Welder

P.O.D.S
06.2005 - 11.2008

Job Foreman

Tim's Construction
06.1999 - 10.2004

Boiler Operator Certification - Mechanical Engineering

RCC

High School Diploma -

Paragon High School

Similar Profiles

CREATE PROFILE
Zachary Hughes