Overview
Work History
Education
Timeline
Generic

Adrian Grissom

Little Rock,Arkansas

Overview

8
8
years of professional experience

Work History

FORKLIFT DRIVER

Delta Plastics Inc
LITTLE ROCK, AR
03.2021 - 10.2023
  • Loaded and unloaded trucks with forklift in a safe manner.
  • Moved products to designated areas using the forklift.
  • Transported, loaded, unloaded and stacked materials.

Maintenance Technician

Delta Plastics Inc
Little Rock, AR
02.2022 - 03.2023
  • Operated hand and power tools to complete repairs.
  • Cleaned work areas to maintain a safe environment free from debris or hazardous materials.
  • Responded promptly to emergency breakdowns at any time during shift hours.
  • Cleared clogged drains and replaced valves, faucets and fixtures.
  • Maintained accurate records of all maintenance activities performed.
  • Repaired or replaced faulty wiring, switches, relays, and other electrical components.
  • Replaced defective parts such as bearings, seals, gears, valves.
  • Maintained clear and safe workspace areas to meet OSHA standards.
  • Installed new systems, replacement parts and components to maintain proper operation.
  • Performed preventive maintenance tasks, including lubrication and cleaning of machines and equipment.
  • Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.
  • Diagnosed mechanical problems using visual inspections and test instruments.
  • Scheduled preventive maintenance programs to keep equipment in good working condition.
  • Assisted in the installation of new machinery and equipment.
  • Read and interpreted equipment and work orders to properly perform required maintenance services.
  • Collaborated with building managers to assess ongoing needs and plan preventive maintenance schedules.
  • Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities.
  • Conducted electrical repairs on motors, lighting systems, and other related components.
  • Responded to personnel queries and troubleshooting requests to provide repair services to improve operations.
  • Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
  • Completed basic carpentry tasks and installed shelves, hooks, and closet rods to meet customer needs.
  • Replaced wall sockets, ran lines and completed basic carpentry to finish installations.
  • Troubleshot complex electrical and mechanical issues with minimal downtime.
  • Checked electrical components to identify defects and hazards and make necessary adjustments.
  • Disassembled appliances to diagnose problems and facilitate repairs.
  • Changed HVAC filters and cleaned condensation drains to perform preventive maintenance on HVAC systems.
  • Followed established safety procedures when operating heavy machinery.
  • Routinely inspected plant equipment for signs of wear or malfunctioning parts.
  • Monitored inventory levels of replacement parts and supplies needed for repairs.
  • Conducted performance and safety inspections on equipment and machinery to maintain operational baseline.
  • Conducted regular safety checks to ensure compliance with OSHA standards.
  • Adjusted machine settings according to manufacturing specifications.
  • Installed new pumps, compressors, boilers and other mechanical systems.
  • Implemented diagnostics to identify failures, determine parts and material requirements and facilitate repairs.
  • Provided technical support to production staff for machine troubleshooting needs.
  • Trained junior technicians on best practices for machine operation and repair.
  • Ensured proper functioning of facility's HVAC system by performing regular maintenance checks.
  • Worked closely with engineering team to develop innovative solutions for existing problems.
  • Developed preventative maintenance plans for various types of machinery.
  • Calibrated instruments used in testing processes to ensure accuracy of results.
  • Implemented troubleshooting techniques to resolve issue.
  • Routinely inspected equipment for preventive and emergency maintenance needs.
  • Repaired machines, equipment or structures using tools or equipment.
  • Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.
  • Performed routine maintenance by inspecting drives, motors or belts.
  • Dismantled machines, equipment, or devices to access and remove defective parts.
  • Ordered parts, supplies or equipment from catalogs or suppliers.
  • Maintained or repaired specialized equipment or machinery.
  • Cleaned or lubricated shafts, bearings or other parts of machinery.
  • Diagnosed and corrected mechanical problems using blueprints, repair manuals or parts catalogs.
  • Inspected, operated or tested machinery or equipment to diagnose machine malfunctions.
  • Adjusted devices or control instruments using hand tools, levels or straightedges.
  • Recorded type and cost of maintenance or repair work.
  • Assembled, installed or repaired electrical or electronic components and pipe systems.
  • Set up and operated machine tools to repair or fabricate jigs, fixtures or tools.
  • Planned and laid out repair work using diagrams, drawings or schematic diagrams.
  • Designed equipment to aid repair or maintenance of machines, mechanical equipment or building structures.
  • Aligned and balanced new equipment after installation.
  • Installed equipment to improve energy or operational efficiency of residential or commercial buildings.
  • Estimated costs to repair machinery, equipment or building structures.

Machine Operator

Delta Plastics Inc
Little Rock, AR
03.2021 - 02.2022
  • Adjust machine settings to complete tasks accurately.
  • Ensure that safety guidelines are followed at all times while operating machinery.
  • Observe machine operations to detect any problems or defects in the finished product.
  • Carry out regular safety checks on machinery prior to operation.
  • Load raw materials into machines according to specified measurements.
  • Comply with company policies regarding quality control procedures.
  • Monitor the feed and speed of machines during the machining process.
  • Prepared machine for production processes by equipping with required tools and parts.
  • Inspect finished workpieces to ensure conformance with specifications.
  • Record production information such as quantities produced and materials used on daily logs.
  • Perform periodic maintenance on machines such as cleaning and lubrication.
  • Maintain records of completed work and production data including volume produced and time required for each task.
  • Unload finished products from machines onto conveyors or other transport systems.
  • Set up and operate machine tools to produce precision parts and instruments.
  • Documented daily production data and submitted accurate time logs to keep management up-to-date.
  • Set up machines for various jobs to maintain compliance with manufacturing thresholds and waste reduction initiatives.
  • Monitored and observed production line to watch for pile-ups and jams.
  • Troubleshoot malfunctions in equipment or processes.
  • Verified production orders prior to starting set-up.
  • Detected work-piece defects and machine malfunctions, maintaining apparatus to prevent future issues.
  • Organized pallets and secured materials with plastic wrap to prepare for movement to skids.
  • Collaborate with other departments when necessary for successful completion of projects.
  • Keep detailed reports of maintenance activities performed on machinery.
  • Lubricated parts and performed minor maintenance to improve machine function.
  • Replace worn tools, sharpen cutting tools, adjust machinery components.
  • Manipulated controls to set, activate and adjust mechanisms on machinery.
  • Check products for accuracy using measuring instruments such as calipers, micrometers, gauges.
  • Operated forklift to place finished products on skids and transport to warehouse.
  • Placed finished products on skids and wrapped and transported to warehouse with forklift.
  • Conducted preventable maintenance on process line and quickly resolved production problems to minimize downtime.
  • Maintained assigned equipment and performed daily inspections to increase equipment longevity and cut costs.
  • Completed written reports of problems and necessary repairs to forward to management and maintenance personnel.
  • Utilized fastening equipment to fasten, package and stack materials and products.
  • Identify areas where improvements can be made in terms of efficiency or cost savings.
  • Established and adjusted feed rates and cutting parameters to keep operations in line with production demands.
  • Operated multiple fabricating machines, cutoff saws, shears and forming or spinning machines.
  • Read and understood blueprints, product specifications, and tooling instructions to plan correct operational sequences and prevent materials waste.
  • Read blueprints and job orders to determine product specifications and tooling instructions.
  • Operate robotic arms within a manufacturing environment.
  • Trained new operators and implemented new division operator training program to improve retention rates and increase production.
  • Performed daily inspections of plant systems, identifying potential problems and taking corrective action as needed.
  • Assisted with troubleshooting issues that arose with facility production processes.
  • Conducted regular safety audits to identify potential hazards or risks within working environment.
  • Trained personnel on safe handling procedures for hazardous materials used during production processes.
  • Promoted efficient operation of production processes through careful control system monitoring
  • Responded to and initiated proper corrections to process alarms.
  • Documented and recorded critical metrics in database related to pressure, temperature, level and flow data to maintain and update accurate repair logs.
  • Started up, shut down and checked water and wastewater treatment processes.
  • Interpreted results of process control analysis and made adjustments to optimize plant performance.
  • Maintained proper chemical inventories.
  • Monitored process units and quality control testing performance for plant processes and water quality sampling.
  • Executed field service on water main and hydrant repairs, valve maintenance and water meter change-outs.

Utility Worker

AMFUEL Zodiac Elastomer Aerospace
Magnolia, AR
02.2017 - 06.2018
  • Maintained clean, organized and fully stocked work areas for maximum efficiency.
  • Organized tools, equipment and supplies necessary to complete assignments.
  • Followed daily maintenance lists to keep work areas productive and operational.

Pool Technician

Crystal Clear Pools Of Port A
Port Aransas, TX
01.2016 - 09.2016
  • Performed weekly pool cleaning and maintenance, including skimming the surface of the water, vacuuming the bottom, brushing walls and steps, backwashing filters, checking chemical levels and adding chemicals as needed.
  • Cleaned swimming pools and tested water to pinpoint chemical supplements needed for optimum water chemistry and sustained cleanliness.
  • Inspected pool equipment for proper functioning of pumps, filters and control equipment.
  • Vacuumed, brushed and cleaned pools to maintain proper functionality and pH.
  • Cleaned debris from filter system components on a regular basis in order to maintain optimal performance of the system.

Education

GED -

Texas High School
Texarkana, TX
05-1996

Timeline

Maintenance Technician

Delta Plastics Inc
02.2022 - 03.2023

FORKLIFT DRIVER

Delta Plastics Inc
03.2021 - 10.2023

Machine Operator

Delta Plastics Inc
03.2021 - 02.2022

Utility Worker

AMFUEL Zodiac Elastomer Aerospace
02.2017 - 06.2018

Pool Technician

Crystal Clear Pools Of Port A
01.2016 - 09.2016

GED -

Texas High School

Similar Profiles

CREATE PROFILE
Adrian Grissom