Summary
Overview
Work History
Education
Skills
Timeline
Generic

Alan WHITE

North Vernon,IN

Summary

Accomplished Mechanical Maintenance Technician with extensive experience at System Group, specializing in welding techniques and equipment maintenance. Proven ability to enhance operational efficiency through effective troubleshooting and preventive maintenance. Recognized for strong teamwork and communication skills, ensuring compliance with safety standards while delivering high-quality fabrication and repair solutions.

Overview

5
5
years of professional experience

Work History

Mechanical Maintenance Technician

System Group
Ghent, KY
02.2025 - Current
  • Attended regular safety meetings to stay up-to-date on best practices while working with hazardous materials.
  • Utilized overhead cranes to lift heavy objects into place during fabrication projects.
  • Repaired damaged metallic components utilizing welding techniques such as gas tungsten arc welding or shielded metal arc welding.
  • Identified any defects in the fabrication process and took corrective action when necessary.
  • Cut metal parts with oxyacetylene torch and plasma cutter.
  • Fabricated metal components and structures according to blueprints, drawings, and written specifications.
  • Conducted daily inspections of machines to identify potential issues or malfunctions.
  • Cleaned and lubricated parts to reduce friction between moving components.
  • Provided guidance to junior technicians regarding troubleshooting techniques and repair methods.
  • Operated forklifts or cranes to move heavy equipment safely around the facility.
  • Reassembled repaired components following manufacturer's specifications and guidelines.
  • Disassembled malfunctioning components for thorough inspection and diagnosis of faults.
  • Assisted with installation and setup of new machinery.
  • Calibrated various instruments used for measuring pressure, temperature, flow rate.
  • Executed complex repairs involving welding, soldering or other specialized tools.
  • Ensured that safety protocols were followed at all times when performing maintenance tasks.
  • Performed regular mechanical maintenance on a variety of equipment and machinery, such as pumps, conveyors, fans, and gearboxes.
  • Installed piping systems for gas delivery lines utilizing appropriate techniques for safe installation.
  • Inspected finished welds for accuracy and quality assurance standards.
  • Ensured that all processes met industry codes and standards as well as customer requirements.
  • Repaired or replaced broken or worn parts using hand tools, power tools, and welding equipment.
  • Performed pipe welding activities according to blueprints and technical drawings.
  • Maintained knowledge of the latest developments in the field of welding technology through research and training courses.
  • Cleaned and prepared surfaces of metal components prior to welding.
  • Conducted regular maintenance checks on tools and equipment used during the job.

Structural Welder

marlin boats an barges
Madison, IN
06.2024 - 02.2025
  • Repaired damaged or defective parts using appropriate welding techniques.
  • Developed customized jigs and fixtures for specific tasks as required by the job at hand.
  • Ensured compliance with safety regulations while performing welding duties.
  • Read technical documents such as blueprints and schematics accurately when necessary.
  • Performed welding on steel components for bridge construction projects.
  • Fabricated metal components according to blueprints and drawings.
  • Followed established procedures regarding pre-heating temperatures before starting a weld.
  • Welded joints in flat, horizontal, vertical, and overhead positions as required by the task at hand.
  • Cleaned surfaces of metals prior to welding them together using wire brushes or grinders.
  • Inspected welds for quality assurance purposes before finalizing the project.
  • Calibrated gauges to measure the correct amount of heat during welding operations.
  • Installed and welded steel beams, columns, girders, and other structural elements.
  • Utilized specialized tools such as clamps, vises, tongs, when required during a project.
  • Determined the proper amperage, voltage settings, and filler metals needed for each job.
  • Replaced worn out electrodes on arc welders regularly for improved efficiency.
  • Maintained a clean work area by removing scraps of metal and other debris from job sites.
  • Operated cutting torches to cut metal pieces prior to welding them together.
  • Applied shielding gases to prevent oxidation during the welding process.
  • Tested different types of welding equipment to ensure optimal performance levels.
  • Determined welding strategies using metallurgy knowledge, geometry, and welding techniques.
  • Set up and operated welding equipment to complete welding projects on-time.
  • Obtained desired configurations by clamping and tack-welding components.
  • Prevented distortion of parts by monitoring fitting, burning, and welding processes.
  • Removed loose materials and thick scale, slag, or rust to prepare material surfaces for welding.
  • Adjusted gas flow and pressure to create and maintain desired flames.
  • Scraped off excess spatter using portable grinders and arc-cutting equipment.
  • Used correct techniques for particular metal types, including aluminum, and steel.
  • Worked on structural supports using techniques such as MIG and TIG welding.
  • Positioned steel units, aligned holes and inserted temporary bolts while checking alignments and joining steel parts.
  • Operated cranes appropriately to hoist metal components into required areas.
  • Set up hoisting equipment to lift and place structural steel items.
  • Removed and replaced existing grating and structural steel with appropriate materials.

Fabrication Welder

Biehle Electric
Seymour, IN
02.2022 - 06.2024
  • Attended regular safety meetings to stay up-to-date on best practices while working with hazardous materials.
  • Repaired damaged metallic components utilizing welding techniques such as gas tungsten arc welding or shielded metal arc welding.
  • Utilized overhead cranes to lift heavy objects into place during fabrication projects.
  • Assisted with the installation of fabricated items at customer sites.
  • Identified any defects in the fabrication process and took corrective action when necessary.
  • Cut metal parts with oxyacetylene torch and plasma cutter.
  • Fabricated metal components and structures according to blueprints, drawings, and written specifications.
  • Reviewed job orders for accuracy and completeness prior to starting work on them.
  • Welded metal pieces together using MIG, TIG, and other welding processes as required.
  • Performed preventative maintenance on all welding equipment.
  • Provided technical guidance and training to junior welders as needed.
  • Checked finished products for conformance to engineering standards before shipping out.
  • Operated forklifts to move large components around the shop floor.
  • Maintained a clean work area in accordance with safety regulations.
  • Collaborated closely with supervisors to ensure that projects were completed on time and within budget constraints.
  • Cleaned and prepared surfaces for welding operations by grinding, sanding, or polishing as needed.
  • Used jigs, fixtures, and tools for assembly of parts and components.
  • Deposited intermittent tack welds for fit-up and alignment of work assemblies.
  • Checked cut length frequently for deviation in cut length specs.
  • Made steel form parts using various cutting equipment and welded part together per specifications.
  • Checked angle of pipe on angle table.
  • Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
  • Safely ignited torches and monitored surroundings to proactively identify hazards.
  • Adjusted weld machines to correct settings for precision and waste reduction.
  • Welded components in flat, vertical, or overhead positions.
  • Selected and installed torches, filler rods and flux according to welding chart specifications.
  • Recognized, set up, and operated shielded metal arc and gas metal arc welding equipment.
  • Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
  • Melted and applied solder along adjoining edges of workpieces to solder joints.
  • Determined equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.
  • Aligned and clamped workpieces using rules, squares or hand tools.
  • Prepared material surfaces for welding by removing scale, rust or other foreign matter.
  • Measured workpieces with straightedges or templates to conform with specifications.
  • Detected faulty operation of equipment or defective materials and notified supervisors.
  • Positioned and secured workpieces using hoists, wire and banding machines or hand tools.
  • Cleaned and lubricated parts to reduce friction between moving components.
  • Operated forklifts or cranes to move heavy equipment safely around the facility.
  • Reassembled repaired components following manufacturer's specifications and guidelines.
  • Disassembled malfunctioning components for thorough inspection and diagnosis of faults.
  • Assisted with installation and setup of new machinery.
  • Calibrated various instruments used for measuring pressure, temperature, flow rate.
  • Developed preventative maintenance plans for all equipment.
  • Executed complex repairs involving welding, soldering or other specialized tools.
  • Troubleshot mechanical problems using schematic diagrams and technical manuals.
  • Ensured that safety protocols were followed at all times when performing maintenance tasks.
  • Performed regular mechanical maintenance on a variety of equipment and machinery, such as pumps, conveyors, fans, and gearboxes.
  • Repaired and replaced worn parts in order to maintain proper functioning of the machines.
  • Followed up with customers after completing service calls to ensure satisfaction with work done.
  • Checked electrical components to identify defects and hazards and make necessary adjustments.
  • Read and interpreted equipment and work orders to properly perform required maintenance services.
  • Conducted performance and safety inspections on equipment and machinery to maintain operational baseline.
  • Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
  • Cleared clogged drains and replaced valves, faucets, and fixtures.
  • Changed HVAC filters and cleaned condensation drains to perform preventive maintenance on HVAC systems.
  • Disassembled appliances to diagnose problems and facilitate repairs.
  • Completed basic carpentry tasks and installed shelves, hooks, and closet rods to meet customer needs.
  • Installed new systems, replacement parts, and components to maintain proper operation.

Fabrication Welder

Toyota Material Handling
Wellsboro, Indiana
07.2020 - 02.2022
  • Attended regular safety meetings to stay up-to-date on best practices while working with hazardous materials.
  • Utilized overhead cranes to lift heavy objects into place during fabrication projects.
  • Repaired damaged metallic components utilizing welding techniques such as gas tungsten arc welding or shielded metal arc welding.
  • Monitored stock levels of supplies used in the fabrication process, ordering additional items when necessary.
  • Developed new methods of fabricating complex parts in order to increase efficiency or reduce costs.
  • Identified any defects in the fabrication process and took corrective action when necessary.
  • Cut metal parts with oxyacetylene torch and plasma cutter.
  • Welded metal pieces together using MIG, TIG, and other welding processes as required.
  • Performed preventative maintenance on all welding equipment.
  • Operated forklifts to move large components around the shop floor.
  • Checked finished products for conformance to engineering standards before shipping out.
  • Cleaned and prepared surfaces for welding operations by grinding, sanding, or polishing as needed.
  • Communicated effectively with team members regarding progress of tasks assigned throughout the day.
  • Marked or tagged material with job number, piece marks and other identifying marks.
  • Positioned and secured workpieces using hoists, wire and banding machines or hand tools.
  • Detected faulty operation of equipment or defective materials and notified supervisors.
  • Aligned and clamped workpieces using rules, squares or hand tools.

Education

High School Diploma -

Seymour High School
Seymour, IN
05-2015

Skills

  • Equipment maintenance
  • Welding techniques
  • Blueprint reading
  • Machine calibration
  • Safety compliance
  • Preventive maintenance
  • Heavy lifting
  • Troubleshooting methods
  • Conveyor systems
  • Problem solving
  • Machine repair
  • Bearing replacement
  • Hydraulic systems
  • Schematic reading
  • Customer communication
  • Time management
  • Precision measuring tools
  • Lubrication techniques
  • Pump maintenance
  • Predictive maintenance
  • Mechanical troubleshooting
  • Gearbox maintenance
  • Blueprint interpretation
  • Valve repair
  • Seal installation
  • Motor alignment
  • Machine lubrication
  • Troubleshooting skills
  • Industrial equipment
  • Lockout and tagout procedures
  • OSHA
  • Hand and power tools
  • Power and hand tool use
  • Metal fabrication
  • Process improvement
  • Technical training
  • Heavy equipment operation
  • Material handling
  • Welding inspection
  • Structural fabrication
  • Overhead crane operation
  • Fitting attachment
  • Purge welding
  • Carbon arc gouging
  • Pipe beveling
  • Teamwork and communication
  • Gas tungsten arc welding
  • Piping fabrication
  • Welding symbols interpretation
  • Gas metal arc welding
  • Shielded metal arc welding
  • Oxy-fuel cutting
  • Pipe alignment
  • Welding positions
  • Fault detection
  • Grinding techniques
  • Flux-cored arc welding
  • Stress relieving
  • Welding codes compliance
  • Joint preparation
  • Plasma cutting
  • Component fabrication
  • Safety procedures
  • Heat treatment
  • Structural component building
  • Layout and marking
  • Task prioritization
  • Straightedge measurements
  • Gas metal arc equipment
  • Detail orientation
  • Shaping and cutting
  • Grinding skills
  • Soldering techniques
  • Flux core welding
  • Grinding and buffing
  • Surface material preparation
  • Equipment selection
  • Wire feed machines
  • Problem-solving aptitude
  • Aluminum metal welding
  • Stick welding
  • Physical stamina
  • Brakes and shears operation
  • Filler Material Selection
  • MIG welding
  • Arc welding
  • Hand and power tool safety
  • Attention to detail
  • Fabrication Understanding
  • Maintain equipment
  • Welding codes and practices
  • Structural installation
  • Grinding work
  • Horizontal welding
  • Error correction
  • Fire prevention
  • Parts alignment
  • Welding safety
  • Hot work permits
  • Structural repair
  • Weld defects identification
  • Post-weld heat treatment
  • Preheating procedures
  • Welding standards
  • Carbon steel welding
  • Cutting techniques
  • Quality controls
  • Welding symbols
  • Visual inspection
  • TIG experience
  • Fabrication
  • Copper welding
  • Plate welding
  • Stainless steel welding
  • Confined space welding
  • Welding quality control
  • Tool repair and maintenance
  • Vertical welding
  • Beam welding
  • Welding procedure specifications
  • Weld distortion control
  • Welding consumables
  • Welder qualification test
  • Pipe welding
  • Overhead welding
  • Beam installation
  • Air carbon arc gouging
  • Prefabricated steel unloading

Timeline

Mechanical Maintenance Technician

System Group
02.2025 - Current

Structural Welder

marlin boats an barges
06.2024 - 02.2025

Fabrication Welder

Biehle Electric
02.2022 - 06.2024

Fabrication Welder

Toyota Material Handling
07.2020 - 02.2022

High School Diploma -

Seymour High School

Similar Profiles

CREATE PROFILE
Alan WHITE
Want your own profile? Create for free at Resume-Now.com