Summary
Overview
Work History
Education
Skills
Timeline
Generic

Bradley Martin

Visalia,CA

Summary

Dedicated and adaptable professional with a proactive attitude and the ability to learn quickly. Strong work ethic and effective communication skills. Eager to contribute to a dynamic team and support organizational goals.

Overview

10
10
years of professional experience

Work History

Fire Technician

Phoenix Fire Protection
Visalia, California
02.2022 - Current
  • Trained personnel on the use and operation of all installed life safety equipment.
  • Maintained records of system tests and repairs performed in accordance with NFPA standards.
  • Updated customer databases with new system information after completion of service work.
  • Responded to emergency calls from customers regarding malfunctioning or non-functioning fire protection equipment.
  • Provided technical assistance to customers regarding their existing fire protection system designs and configurations.
  • Collaborated with other technicians during complex installations or repairs requiring multiple steps.
  • Performed routine maintenance on all fire protection equipment to ensure proper operation.
  • Inspected portable extinguishers for compliance with applicable codes and regulations.
  • Installed new fire alarm systems according to plans and specifications provided by engineers.
  • Ensured that all necessary tools were available prior to commencing any service call.
  • Helped keep machinery functioning properly with regular inspections and maintenance.
  • Inspected buildings to determine compliance with fire codes and fire prevention protocols.

Machine Operator

Cream Of The Crop
Visalia, California
09.2020 - 05.2021
  • Adjust machine settings to complete tasks accurately.
  • Unload finished products from machines onto conveyors or other transport systems.
  • Perform periodic maintenance on machines such as cleaning and lubrication.
  • Inspect finished workpieces to ensure conformance with specifications.
  • Performed regular maintenance on machines to ensure optimal performance.
  • Carry out regular safety checks on machinery prior to operation.
  • Identify areas where improvements can be made in terms of efficiency or cost savings.
  • Set up and operate machine tools to produce precision parts and instruments.
  • Keep detailed reports of maintenance activities performed on machinery.
  • Monitor the feed and speed of machines during the machining process.
  • Ensure that safety guidelines are followed at all times while operating machinery.
  • Comply with company policies regarding quality control procedures.
  • Adjusted machine settings according to production requirements.
  • Troubleshoot malfunctions in equipment or processes.
  • Observe machine operations to detect any problems or defects in the finished product.
  • Replace worn tools, sharpen cutting tools, adjust machinery components.
  • Verified production orders prior to starting set-up.
  • Prepared machine for production processes by equipping with required tools and parts.
  • Monitored and observed production line to watch for pile-ups and jams.
  • Performed daily inspections of plant systems, identifying potential problems and taking corrective action as needed.
  • Conducted regular safety audits to identify potential hazards or risks within working environment.
  • Promoted efficient operation of production processes through careful control system monitoring

Laborer

West Pacific Electric
Pismo Beach, CA
06.2019 - 02.2020
  • Transported heavy items from one location to another using hand trucks or carts.
  • Loaded and unloaded materials onto or from pallets, trucks, or other vehicles using a forklift.
  • Poured concrete foundations for structures such as buildings or bridges according to blueprints provided.
  • Assisted with basic maintenance tasks such as sweeping, mopping, painting, and cleaning.
  • Stacked and arranged products on pallets according to size and weight requirements.
  • Lifted objects weighing up to 50 pounds without assistance when necessary.
  • Ensured that all personal protective gear was worn at all times while on the job site.
  • Cleaned work area after job completion ensuring all debris is properly disposed of.
  • Performed regular checks of equipment for proper operation and safety compliance.
  • Inspected finished projects for quality assurance purposes before handing off to customer.
  • Organized tools, supplies, and equipment needed for specific jobs according to instructions provided by supervisor.
  • Operated various power tools such as drills and saws safely while following manufacturer's instructions.
  • Maintained accurate records of inventory levels and product locations in the warehouse.
  • Prepared surfaces prior to painting by sanding, scraping, patching holes, and filling cracks with putty or plaster.
  • Worked with team members to ensure efficient workflow throughout the day.
  • Unloaded freight from containers and organized them for storage in designated areas.
  • Performed repetitive assembly tasks with hand and power tools and automated equipment.
  • Completed variety of physical labor tasks.
  • Met company and OSHA safety guidelines for work site operations to minimize worker risk.
  • Cut materials into specified sizes for installation using tile cutters and power saws.
  • Utilized two-way radios and hand signals to coordinate communication between equipment operators.
  • Mixed, poured, and spread concrete, asphalt gravel and other materials.
  • Operated and maintained a variety of equipment including hand and power tools.
  • Performed regular servicing and preventive maintenance on assigned equipment.
  • Performed physical activities requiring heavy lifting, walking and standing for long periods of time.
  • Sorted and placed materials or items on racks, shelves or in bins to keep warehouse organized.
  • Lubricated and cleaned machinery and tools.
  • Operated pallet jacks and forklifts to load and unload supplies and materials.
  • Collaborated with team members to complete assigned tasks and meet tight deadlines.
  • Maintained clean, safe working environment by removing debris from job site prior to shift completion.
  • Used picks and shovels to dig, spread and level dirt and gravel.
  • Prepared items for transportation installing bracing, padding and strapping to prevent damage.
  • Loaded and unloaded daily material shipments, keeping products organized and secure to prevent damage and optimize handling.
  • Performed demanding physical work over extended periods and modeled positive attitude.
  • Displayed high standards for quality workmanship and routinely double-checked work.
  • Gained independent working skills and guided and mentored less experienced team members.
  • Operated equipment with strong focus on safety and ground communication.
  • Coordinated phases of construction projects from inception to completion.
  • Inspected sites before and after construction projects.
  • Loaded materials and tools into vehicles and unloaded upon arrival at jobsites.
  • Understood how to operate and maintain job site equipment safely and for maximum productivity.
  • Controlled traffic passing near, in or around work zones.
  • Learned and mastered skilled trade specialties under guidance of expert mentors.
  • Assisted with diverse construction challenges to help team and customer.
  • Dug ditches or trenches, backfilled excavations or compacted and leveled earth to grade specifications.
  • Positioned, aligned or sealed concrete wall sections or pipes.
  • Cleaned or prepared construction sites to eliminate hazards.
  • Demonstrated best safety practices working at heights and lifting various objects.
  • Measured, marked or recorded openings or distances to construction layout areas.
  • Signaled equipment operators to facilitate alignment, movement or adjustment of machinery.
  • Lubricated, cleaned or repaired machinery or equipment.

Grinder

J&A Manufactures
Pixley, California
03.2018 - 07.2018
  • Observed operation of equipment to detect malfunctions or out-of-tolerance grinding.
  • Dressed wheels according to shape and size of the part being ground.
  • Operated manual or automatic loading devices to feed parts into production machinery.
  • Set up and operated grinding machines to grind external or internal cylindrical or tapered surfaces of metal pieces.
  • Inspected parts for surface defects, wear, proper clearance and conformance to specifications.
  • Graded materials and determined their suitability for processing based upon established standards.
  • Mounted attachments such as fixtures onto grinder spindle nose in order to hold parts during grinding operations.
  • Recorded data from each operation performed on the job card.
  • Adjusted grinding wheels to obtain specified dimensions and surface finish of workpiece.
  • Verified conformance of finished work piece to specifications using measuring instruments such as gauges, micrometers, and dial indicators.
  • Calculated size adjustments and machine settings to achieve specified results.
  • Deburred rough edges on machined parts by filing, scraping, sanding or buffing them with hand tools.
  • Checked material stock levels in order to replenish supplies as needed.
  • Maintained a safe working environment by adhering strictly to safety regulations.
  • Notified supervisors when major repairs were needed on grinding machines.
  • Performed minor maintenance on grinding machines including replacing worn components such as bearings and belts.
  • Measured workpieces with micrometers, calipers, and precision measuring instruments to ensure accuracy.
  • Selected correct grinding wheel for material being ground.
  • Cleaned all machines after use before leaving the area.
  • Ensured that all safety procedures were followed while operating the grinder.
  • Performed deburring, buffing and polishing surfaces to remove scratches and other imperfections.
  • Contributed to team-based environment to maintain line productivity and meet expected deadlines.
  • Operated equipment in environment with attention towards safety to avoid workplace accidents.
  • Maintained equipment in proper working order by completing maintenance and calibrating settings.
  • Upheld all requirements for safety, performance and compliance to keep equipment operational while safeguarding all workers.
  • Maintained work area safety and appearance, focusing on safety, organization and cleanliness.
  • Trained new employees on company and safety standards, providing assistance and remediation with issues.
  • Maximized shop organization and equipment lifespan by maintaining equipment.
  • Reviewed pieces to assess compliance and note defects.
  • Understood and complied with plant environmental, health and safety, environmental and OSHA regulatory requirements.
  • Assisted engineers with installation, start-up and debugging of new equipment.
  • Repaired and adjusted tools and fixtures and assisted engineers with installation, start-up and debugging of new equipment.
  • Performed complex math calculations to deliver precise machine setup.
  • Executed machine offsets and tool changes and troubleshot and cleared machine alarm conditions.
  • Equipped machines to meet or exceed target production output with low scrap numbers.
  • Equipped machines with levers.
  • Operated and set tools on various machines and kept machines running to required levels.

Water Jet Operator

American Incorporated
Visalia, California
03.2014 - 02.2017
  • Performed routine maintenance activities including checking oil levels, lubricating moving parts, and inspecting hoses for leaks or damage.
  • Received training on new machines or updated software programs used in controlling the Water Jet cutter.
  • Calibrated machinery components prior to each job run ensuring accuracy of cuts within specified tolerances.
  • Adhered strictly to company policies concerning safety regulations while operating equipment.
  • Communicated with supervisors regarding job progress and any changes needed during production runs.
  • Reviewed blueprints, drawings, and sketches to determine dimensions of parts or structure to be cut.
  • Positioned material on the Water Jet table using jigs and fixtures for accuracy.
  • Ensured all safety procedures were followed when operating the Water Jet cutter.
  • Cleaned up debris from completed jobs to keep workspace organized and safe.
  • Adjusted settings on control panel such as speed and pressure to ensure proper cuts were made.
  • Readied work orders from customers by correctly programming the CNC controls based on provided instructions.
  • Operated a Water Jet cutting machine to cut various materials and shapes according to specifications.
  • Monitored operation of the water jet machine to detect any malfunctions or errors in cutting process.
  • Loaded material onto the Water Jet table manually or with a crane hoist.
  • Provided input into design processes that improved efficiency of production runs.
  • Inspected finished products for quality assurance purposes before packaging them for shipment.
  • Kept accurate records of production output rates, downtime incidents, and other related information in logbooks or computer databases.
  • Maintained optimal performance of the Water Jet by regularly changing filters, replacing coolant, and cleaning nozzles.
  • Troubleshot issues with software programs used in controlling the Water Jet cutter.
  • Reviewed documentation and work order requirements.
  • Properly handled hazardous waste materials to uphold safety regulations.
  • Applied knowledge of physical properties of workpiece materials to plan sequences and operations.
  • Read work orders or production schedules to determine materials, locations of cutting lines or dimensions and tolerances.
  • Accurately set-up fold, adjusting roll mechanisms, tension, and guide devices.
  • Adhered to company and OSHA safety procedures to protect team members, products and equipment.
  • Maintained adequate productivity by setting and enforcing deadlines.
  • Cleaned, lubricated and repaired machinery for optimal performance.
  • Ground out burrs or sharp edges with portable grinders, speed lathes or polishing jacks.
  • Kept machines running at peak efficiency to meet demanding production targets.
  • Turned controls to set cutting speeds, feed rates or table angles for specified operations.
  • Threaded ends of metal coils from reels through slitters to secure ends on recoilers.
  • Inspected printed products for clarity, color accuracy and conformance to provided specifications.
  • Cut off excess materials for reuse or recycling.
  • Positioned, aligned and secured workpieces against fixtures or stops on machine beds.
  • Examined completed pieces to check for defects and sorted items according to identified flaws.
  • Took measurements with calipers and gauge readers to assess line performance.
  • Followed work orders to select proper materials, make accurate cuts, and complete precise finished products.

Education

Some College (No Degree) - Fire Science

College of The Sequoias
Visalia, CA

Skills

  • Fire suppression systems
  • Hazardous Materials Handling
  • Smoke detector testing
  • Pump and Hose Management
  • Accident Site Response
  • Dispatch Communication
  • Hazard Identification
  • Detailed Reporting
  • Fire Suppression Techniques
  • Team Collaboration
  • Station and Equipment Cleaning
  • Safety Equipment Inspection
  • Mechanical Equipment Repair
  • Active Listening
  • Community Education
  • Safety inspection
  • Professional Demeanor
  • Continuous Improvement
  • Organizational Skills
  • Physical Conditioning
  • Attention to Detail
  • Fire Prevention Education
  • Written Communication
  • Adaptability and Flexibility
  • Problem-solving abilities
  • Effective Communication
  • Emergency Response
  • Hazardous Material Handling
  • Relationship Building
  • First Aid
  • Excellent Communication
  • Crew training
  • Quality Assessment
  • Equipment and Building Inspection
  • De-Escalation Techniques
  • Fire prevention
  • Physical Stamina
  • Team building
  • Pump operation
  • Work Planning and Prioritization
  • Professionalism
  • Ladder operation
  • Task Prioritization
  • Incident Reporting
  • Apparatus maintenance
  • Time management abilities
  • Interpersonal Communication
  • Goal Setting
  • Fire suppression work
  • Problem-solving aptitude
  • Resource Monitoring
  • Fire suppression tactics
  • Decision-Making
  • Flexible and Adaptable
  • Conditions assessment
  • Public assistance and support
  • Time Management
  • Law Enforcement Collaboration
  • Adaptability
  • Self Motivation

Timeline

Fire Technician

Phoenix Fire Protection
02.2022 - Current

Machine Operator

Cream Of The Crop
09.2020 - 05.2021

Laborer

West Pacific Electric
06.2019 - 02.2020

Grinder

J&A Manufactures
03.2018 - 07.2018

Water Jet Operator

American Incorporated
03.2014 - 02.2017

Some College (No Degree) - Fire Science

College of The Sequoias

Similar Profiles

CREATE PROFILE
Bradley Martin