Brandon Galloway

Laid out 2-8” lines on roof for efficient piping system

Installed new valve stations to enhance system control

Measured and aligned field components to complete tie ends for freezer installation

• Demonstrated removal of outdated 3” tubes to facilitate upgrades
• Installed new tubes to enhance system integrity
• Replaced old fittings in existing line to maintain functionality

Prefabricated 6-16” pipe spools for an emergency job

• Installed piping systems for various industrial applications.
• Interpreted blueprints and schematics for accurate pipe layout.
• Collaborated with team members to ensure project deadlines were met.

Layout new 4-18” carbon steel lines

Designed layout for 4-18” carbon steel lines

Created supports for new production lines

Replaced existing valves with new butterfly valves

Demonstrated removal of old 2” heater tubes from equipment

Installed new 2” heater tubes, ensuring proper fit and function

• Installed and repaired piping systems in various residential and commercial settings.
• Interpreted blueprints and schematics to determine pipe layout and specifications.
• Collaborated with team members to ensure project timelines were met efficiently.

Prefabricated pipe spools based on verified field measurements

Fabricated and installed piping spools in accordance with project specifications

• Fabricated and installed piping systems for commercial and industrial projects.
• Interpreted blueprints and schematics to determine pipe layout and installation methods.
• Conducted pressure tests on piping systems to ensure integrity and safety compliance.

Conducted repairs on 2-inch boiler tube leaks to ensure efficient operation.

• Installed and repaired piping systems for various industrial applications.
• Collaborated with team members to ensure compliance with safety standards.
• Interpreted blueprints and technical drawings for accurate installations.

Installed prefabricated piping spools from 2”-10”

Performed pneumatic test to sell off finished lines

Replaced old valves with new butterfly valves

Dismantled old 2” line and constructed new line to enhance system reliability

Added new fittings to existing pipe

Installed new fittings on existing piping systems

Laid underground gas piping according to safety standards.

Cut various pipe sizes and lengths for precise installation fit.

• Installed piping systems according to specifications and safety standards.
• Collaborated with team members to troubleshoot piping issues effectively.
• Conducted regular inspections to ensure system integrity and compliance.

Measured field dimensions to fabricate piping spools

Installed pipe supports to ensure stability during installation

Cut openings in walls and floors to accommodate pipe and pipe fittings.

Installed piping spools to ensure proper system functionality

Laid out new stainless pipe for gas farm unit at CF Verdigris, ensuring proper alignment and fit for optimal performance.

Handled all responsibilities for piping systems, including fabricating, assembling, and installing

Removed outdated heater tubes, and installed new ones 6” carbon

Installed structural supports for pipes to keep them in place during installation process.

Replaced 18 exchangers

Demo’d down a structure and rebuilt a new one..Replaced expansion joints

• Threaded pipes using piping machines.
• Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
• Cut and drilled holes in walls to permit passage of pipes.

Replace bundles.., Demo’d out 2-6 inch pipe.., Hung new Pipe.., Replaced a lot of valves..Hydro’d a bunch of pipe

Took out old PSV’s and replaced new ones. Replaced bolts and gaskets to repair leaks.

• Inspected and lubricated valves; removed, replaced and installed components to correct operating deficiencies.
• Maintained compliance with all safety procedures from both client and employer.
• Removed, old bundles and replaced new ones.
• Removed boiler casings, grades, handrails, manhole and hole covers to facilitate access to boilers or other vessels
• Tightened or replaced bolts and gaskets to repair leaks.
• Took out old spring cans under bundles, and replaced new ones

• Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
• Inspected and examined all machinery and equipment to detect malfunctions or irregularities.
• Operated machine tools to fabricate parts during overhaul, maintenance or setup of machineries.
• Laid out mounting holes, using measuring instruments and drilled holes with power drill.
• Inserted shims, adjusted tension on nuts and bolts and positioned parts, using hand tools and measuring instruments.
• Increased longevity of machinery and tools by completed regular sharpening and maintenance.

• Installed stationary industrial machinery and mechanical equipment according to layout plans.
• Laid out mounting holes, using measuring instruments and drilled holes with power drill.
• Inserted shims, adjusted tension on nuts and bolts and positioned parts, using hand tools and measuring instruments.
• Operated machine tools to fabricate parts during overhaul, maintenance or setup of machineries.
• Replaced defective parts of machines and adjusted clearances and alignment of moving parts.

• Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
• Inserted shims, adjusted tension on nuts and bolts, and positioned parts, using hand tools and measuring instruments.
• Installed stationary industrial machinery and mechanical equipment according to layout plans.
• Inspected and examined all machinery and equipment to detect malfunctions or irregularities.

• Inspected and examined all machinery and equipment to detect malfunctions or irregularities.
• Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
• Kept detailed and accurate maintenance reports and documentation of progress.
• Inserted shims, adjusted tension on nuts and bolts, and positioned parts, using hand tools and measuring instruments.

• Mounted brackets and hangers on walls and ceilings to hold pipes in place.
• Cut or drilled holes in walls or floors to accommodate passage of pipes.
• Followed safe work practices, which included fall protection and personal protective equipment.
• Measured, cut, threaded and assembled new pipe to place assembled pipe in hangers or other supports.
• Measured, cut and assembled new pipe and placed assembled pipe in hangers or other supports.

• Cut out old gate valves, installed new ones.
• Replaced 2” 3” and 6” carbon pipe.
• Cut openings in structures to accommodate pipes and pipe fittings.
• Threaded pipes using piping machines.
• Fabricated and installed screw pipe, socket weld pipe and butt weld pipe.
• Located and repaired or replaced worn and broken components to enhance system functionality and durability.
• Fabricated piping pieces and components in line with design specifications for each system.

• Cut openings in structures to accommodate pipes and pipe fittings with a metabo and Torch.
• Measured, threaded and cut materials to correct angles.
• Loaded and unloaded building materials weighing up to 50 pounds to prepare materials for construction.
• Used Levels and squares to fit valves, couplings and assemblies to tanks and pumps.
• Fabricated piping pieces and components in line with design specifications for each system.
• Interpreted blueprints to determine locations, quantities and sizes of materials required.

• Followed safe work practices, which included fall protection and personal protective equipment.
• Threaded pipes using piping machines.
• Fabricated piping pieces and components in line with design specifications for each system.
• Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing.
• Cut and drilled holes in walls to permit passage of pipes.

• Measured, threaded and cut materials to correct angles.
• Interpreted blueprints to determine locations, quantities and sizes of materials required.
• Followed safe work practices, which included fall protection and personal protective equipment.
• Fabricated and installed screw pipe, socket weld pipe.
• Fabricated piping pieces and components in line with design specifications.

• Removed, replaced or installed Cables to perform annual maintenance.
• Maintained compliance with all safety procedures from both client and employer.
• Cleaned and maintained boilers and associated equipment to increase efficiency and performance level.

• Cleaned and maintained boilers and associated equipment to increase efficiency and performance level.
• Dismantled equipment or devices to gain access and remove defective parts or components.
• Removed, replaced and installed old/new materials to perform annual maintenance.
• Assembled and analyzed boilers for defects.

• Removed boiler casings, grades, handrails, manhole and hole covers to facilitate access to boilers or other vessels for repair.
• Removed, replaced or installed Cut materials to perform annual maintenance.
• Cleaned and maintained boilers and associated equipment to increase efficiency and performance level.
• Used hand signals to notify crane operator to lift components to specific positions.

• Cleaned and maintained boilers and associated equipment to increase efficiency and performance level.
• Removed boiler casings, grades, handrails, manhole and hole covers to facilitate access to boilers or other vessels for repair.
• Inspected and lubricated valves; removed, replaced or installed components to correct operating deficiencies.

• Cleaned and maintained boilers and associated equipment to increase efficiency and performance level.
• Removed, replaced or installed heavy materials to perform annual maintenance.
• Used power hammers to remove materials from boiler
• Removed boiler casings, grades, handrails, manhole and hole covers to facilitate access to boilers or other vessels for repair.
• Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.