Byron Wheatley
Anniston,Alabama
Summary
Experienced and dependable Electronics Technician with a strong track record in ensuring workplace safety, conducting electro-mechanical maintenance, and overseeing operations. Certified in Six Sigma methodology, possesses a deep understanding of quality assurance and regulatory compliance. Skilled in technical troubleshooting, process optimization, and critical thinking, consistently delivers efficient solutions to complex problems.
Overview
16
16
years of professional experience
1
1
Certification
Work History
Mechanic 3-4/Test Tech
Honeywell International
- In an Aerospace Repair and Overhaul environment, performed visual and mechanical checks on units to determine the extent of malfunction, damage, or wear
- Disassembled, repaired, overhauled, modified, and assembled per the Repair and Overhaul Manual, CMM, written instructions
- Read repair orders to understand incoming condition of unit and cause for return
- Collected appropriate documentation such as the R & O Manual, CMM, and Service Bulletins
- Visually checked unit and noted general condition of the unit
- Set up and performed bench checks as required
- Disassembled units as necessary
- As required, used available resources to clean units or detailed parts
- Utilized the Repair & Overhaul Manual, CMM, Service Bulletins, and other instructions, disassembled/assembled completely for test all units within assigned area of responsibility
- Performed bench checks as required and some functional checks necessary to verify repair is complete
- Used Depth Micrometer, C Micrometer, Inner Micrometer, bore gauges, hardness tester and Dial Calipers to complete dimensional checks as required per technical data
- Performed final test as required to certify units ready to be returned to service
- Completed all paperwork as required
- Maintained a safe and clean work area
- Performed all other duties as assigned
- Worked to a Mechanic Level 4/Team leader role.
Warranty Adjudication/Pricing Analyst
Honeywell International
- In an Aerospace Repair and Overhaul environment, determined pricing and warranty decisions on units based on information provided from analysts, customer PO and customer contracts
- Contacted customer with quote to receive their approval for work to be performed.
Electronics Tech 1 & 2
Elbit Systems of America
03.2021 - Current
- Performed visual inspection, testing, fault analysis, and repair/overhaul of electronic units
- Disassembled, repaired, modified, and assembled per the Repair and Overhaul Manual, CMM, written instructions, TO’s, and ATPs down to detail/component level
- Read repair orders to understand incoming condition of unit and cause for return
- Collected appropriate documentation such as the R & O Manual, CMM, and Service Bulletins
- Visually checked unit and noted general condition of the unit
- Set up and performed bench checks as required
- Induction tested, troubleshoot and disassembled units as necessary
- As required, used available resources to clean units or detailed parts
- Utilized the Repair & Overhaul Manual, CMM, TO’s, Service Bulletins, schematics and other instructions, disassembled and assembled completely for test all units within assigned area of responsibility
- Performed functional checks necessary to verify repair is complete
- Used meters, oscilloscopes, function generators, digital multimeters, frequency counters/synthesizers, pneumatic gauges and manometers as necessary to perform test and checks as required per technical data
- Assembled and maintained test equipment as necessary to ensure proper evaluation was performed
- Completed all paperwork as required
- Maintained a safe and clean work area
- Performed all other duties as assigned
- Worked with engineering to update ATPs and to develop new tests for new test system, WesTest 2000/DATS
- Successfully completed Elbit leadership training.
Final Out Inspector/Release to Service Technician Level 3 and 4
Honeywell International
01.2013 - 11.2020
- Performed return-to-service inspection on Repair & Overhaul materials per the Repair Station Manual
- Generated FAA 8130-3 (Return-to-Service) and 8130-1 (Export) forms as required
- Performed return-to-service inspection in accordance with EASA and CAAC regulations
- Generated Form 1 or AAC-038 as required
- Maintained quality management system procedures governing Final inspection
- Maintained records required by the Quality Management System
- Recorded inspection results and documented non-conformances per defined procedures
- Prioritized work to ensure site production needs are met
- Performed inspections and maintained inspection records per customer and regulatory requirements
- Reviewed inspection records with customer and regulatory agency representatives as required
- Assisted in other areas of quality department as needed, such as receiving inspection and performing quality audits
- Assisted in shipping as necessary to box/foam units and ship through appropriate carrier.
- Ensured compliance with industry regulations through meticulous attention to detail during inspections.
- Prepared reports detailing findings of inspections, investigations, and tests.
- Delivered detailed reports on findings from inspections, helping stakeholders understand areas requiring attention or improvement in order to maintain regulatory compliance.
- Upheld codes and regulations governing materials, processes, and procedures.
- Improved quality assurance procedures to minimize errors and increase effectiveness of inspections.
- Identified potential hazards and recommended corrective actions, ensuring a safer work environment for all employees.
- Maintained up-to-date inspection and audit records for improved reporting and analysis.
- Mentored junior inspectors, sharing industry expertise to enhance their skills and abilities in performing thorough inspections.
- Inspected and examined materials and finished parts and products for defects and wear to verify conformance with blueprints, diagrams, and template specifications.
- Reduced the frequency of defects by closely monitoring production processes and identifying areas for improvement.
- Effectively communicated with clients and management to ensure alignment on inspection objectives, requirements, and expectations.
Electronic Technician 3/Workflow Specialist
Honeywell International
01.2015 - 01.2019
- Performed visual inspection, testing, fault analysis, repair/overhaul, and release to service of Class IV electronic units
- Disassembled, repaired, modified, and assembled per the Repair and Overhaul Manual, CMM, written instructions
- Read repair orders to understand incoming condition of unit and cause for return
- Collected appropriate documentation such as the R & O Manual, CMM, and Service Bulletins
- Visually checked unit and noted general condition of the unit
- Set up and performed bench checks as required
- Induction tested, troubleshoot and disassembled units as necessary
- As required, used available resources to clean units or detailed parts
- Utilized the Repair & Overhaul Manual, CMM, Service Bulletins, schematics, and other instructions, disassembled and assembled completely for test all units within assigned area of responsibility
- Performed functional checks necessary to verify repair is complete
- Used meters, oscilloscopes, function generators, digital multimeters, frequency counters/synthesizers, pneumatic gauges, and manometers as necessary to perform test, calibrate and checks as required per technical data
- Completed all paperwork as required
- Maintained a safe and clean work area
- Performed all other duties as assigned
- Worked with test system engineering to maintain test equipment and to develop new test systems
- Developed TPM sheets for tests systems.
ISC Supervisor
Honeywell International
01.2009 - 01.2013
- Supervisory role within a 250 employee Repair and Overhaul Aerospace environment
- Monitor, assist, and improve all aspects of Safety, Quality, Productivity, and Delivery
- Ensure Safety throughout the department
- Eliminate, prevent, countermeasure all quality issues
- Ensure daily output goals are met
- Initiate improvement actions to reduce the department spending
- Responsible for all departmental metrics
- Drive attendance within the department
- Coach Team Leaders/Workflow Specialists and operators through effective feedback methods to encourage good work habits
- Explain why and impress upon the team a sense of urgency to reach the team goals and to get things done
- Supervises and provides direction to Mechanics and Test Technicians
- Establishes goals, evaluates performance against established goals and objectives for results and behaviors
- Provides regular feedback, coaching, and development plans for each team member
- Takes performance management actions as appropriate
- Provides training to team members as required to improve/maintain skills
- Encourages the use of Six Sigma Tools and HOS methods that will properly solve problems
- Provides new employee orientation and new employee introductions
- Communicate with WFS and team members daily through tier meetings and individual coaching.
Education
Bachelor of Science - Business Management
Jacksonville State University
Jacksonville, ALAssociate of Science - Industrial Electronics Technology
AYERS STATE TECHNICAL COLLEGE
Anniston, AL07.1989
Skills
- SAP Power User
- Microsoft Office Suite
- Troubleshooting skills
- Soldering and wiring
- Electromechanical assembly
- Digital electronics
- Lean Six Sigma
- Problem-Solving
- Attention to Detail
Certification
- Six Sigma Greenbelt Certification – May 2004
- FAA Certified Repairman
- J Standard solder and solder inspector certified
Timeline
Electronics Tech 1 & 2
Elbit Systems of America
03.2021 - Current
Electronic Technician 3/Workflow Specialist
Honeywell International
01.2015 - 01.2019
Final Out Inspector/Release to Service Technician Level 3 and 4
Honeywell International
01.2013 - 11.2020
ISC Supervisor
Honeywell International
01.2009 - 01.2013
Mechanic 3-4/Test Tech
Honeywell International
Warranty Adjudication/Pricing Analyst
Honeywell International
Bachelor of Science - Business Management
Jacksonville State University
Associate of Science - Industrial Electronics Technology
AYERS STATE TECHNICAL COLLEGE
- Six Sigma Greenbelt Certification – May 2004
- FAA Certified Repairman
- J Standard solder and solder inspector certified
Similar Profiles
Adam McKenzieAdam McKenzie
Senior Test Technician at Honeywell InternationalSenior Test Technician at Honeywell International
J. Antonio CorreuJ. Antonio Correu
Credit Analyst at Honeywell InternationalCredit Analyst at Honeywell International
John GilmoreJohn Gilmore
Senior Technician at Honeywell InternationalSenior Technician at Honeywell International