Caleb Stewart
Broken Arrow,US
Summary
Knoweldgable at heavy equipment operation and team communication, I significantly enhanced productivity and safety standards at Total Valve Systems. My fast-learning ability and strong work ethic, complemented by OSHA certification, have consistently driven project success and efficiency improvements across diverse roles in construction and equipment testing.
Overview
8
8
years of professional experience
Work History
Valve Technician
Total Valve Systems
Broken Arrow, OK
05.2024 - Current
- Performed inspections and testing of valves to ensure proper functioning and safety standards.
- Calibrated valves using hand tools and gauges according to manufacturer specifications.
- Repaired defective valves, including replacing seals, gaskets, springs, and other components.
- Prepared surfaces for sandblasting by removing rust, dirt, paint, and other debris.
- Set up and operated sandblasting equipment according to safety protocols.
- Cleaned and maintained all sandblasting equipment after each job was completed.
- Inspected parts before and after sandblasting process to ensure quality control standards were met.
- Tested repaired items to ensure proper operation before returning them to customers.
Apprentice Plumber
Air Assurance
Broken Arrow, Oklahoma
10.2023 - 05.2024
- Installed and maintained plumbing systems in accordance with local building codes.
- Assisted journeyman plumbers in performing repairs and maintenance on pipes, fixtures, and other plumbing equipment.
- Assembled pipe sections, tubing and fittings using couplings, clamps, screws, bolts, cement, plastic solvent and soldering materials.
- Cut openings in walls and floors to accommodate pipe and pipe fittings.
- Inspected drainage systems for compliance with specifications and local regulations.
- Repaired leaking valves, replaced defective washers and gaskets, repaired or replaced broken pipes.
- Tested pipes for leaks using air pressure gauges or water pressure gauges.
- Removed waste material from work sites after completing projects safely.
- Performed minor repairs on appliances such as dishwashers and garbage disposals.
Traffic Control
Advanced Workzone Services
Tulsa, US
02.2023 - 10.2023
- Hourly checks of the construction zone to make sure the flow of traffic isn't constricted
- Set up signs, fix traffic barriers that have been knocked out
- Answer phone calls from law enforcement about vehicles blocking the area
- Help pedestrians change flat tires or call the wrecker on shift to have the vehicle towed
- Right reports on each incident or issue that needed to be fixed
Utility pole Inspector Foreman
Osmose Utilities Services
Peachtree City, US
07.2022 - 01.2023
- Assigned work to employees based on the project's requirements and the strengths of each team member
- Coordinated crew schedules and day-to-day activities to meet project requirements
- Kept track of supplies, parts, equipment, and employee work hours for each job
- Maintained high safety, productivity, and quality standards for each job
- Improved production methods and increased employee motivation to increase team productivity
- Evaluated each employee's strengths and assigned daily tasks based on their knowledge and skill sets
- Encouraged and supported field workers who were completing work to improve the quality and efficiency of their work
- Conferred with other managers, technical personnel, and team leaders to coordinate efficient site work and maintain tight schedules
- Drove company vehicles to and from job locations while following safety protocols and maintaining a good driving record
- Gave weekly updates to supervisors on project progress, site issues, and labor status
- Followed federal and company regulations to ensure that all job sites maintained a high level of safety
- Submitted daily working hours and weekly work hours to payroll
- Followed directions and steps to properly inspect a utility pole
- Used the steps to treat utility poles while using proper safety precautions due to dangerous chemicals
- Properly tagged and logged utility poles into a server for companies to verify latest inspections
- Customer service to inform any citizen of work being done on private property
Heavy Equipment Operator
Ira M Green Construction
Claremore, US
01.2022 - 06.2022
- Kept meticulous records of all fuel used by the front end loader, submitting logs to the Foreman on a daily basis
- Communicated issues that needed to be addressed right away with the foreman and supervisor so that they could be resolved quickly
- Assisted construction workers with specific job responsibilities
- Followed all safety protocols and procedures to avoid injuries and accidents during each shift
- Locked up tools and job site machinery and secured the area at the end of each shift
- Performed thorough equipment inspections, repairs, and maintenance to extend the life of each piece of equipment
- Graded and shaped land for construction and finishing
- Followed all heavy equipment safety and operation protocols to the letter, which resulted in few complaints or incidents
Frac Equipment Operator
Calfrac Well Services Corporation
Williston, US
10.2021 - 01.2022
- Control panels were maneuvered to regulate and coordinate product flow rates
- Reported operational flaws to the supervisor and maintenance personnel in order to encourage timely equipment maintenance and avoid potential injuries
- Operated and maintained frac equipment
Equipment Operator
Davis H Elliot Co Inc.
Oklahoma City, US
03.2021 - 09.2021
- Secured the job site by removing tools and machinery at the end of the shift
- Followed signals from the ground crew and other operators to avoid dangerous interactions or missing cues for proper materials movement
- Maintained proficiency in various types of equipment and related attachments to meet job site requirements
- Received training in a variety of equipment and useful attachments so that I could handle any team need
- Determined and marked the locations of underground pipes and wires to plan optimal digging locations
- Checked, repaired, and maintained equipment to ensure its long-term viability and performance
- Increased the protection of equipment and personnel by identifying and avoiding hazards such as utility lines
- Communicated with ground team members and fellow operators to avoid safety hazards and keep materials moving
- Performed thorough equipment inspections, repairs, and maintenance to extend the life of each piece of equipment
- Located and marked underground services such as pipes and wires to determine accurate digging locations
- All safety policies and procedures were followed
Apprentice Plumber
All American Plumbing
Tulsa, US
01.2021 - 03.2021
- Consistently took on additional responsibilities and worked long hours to meet project deadlines
- Designed and executed the layout and installation of electrical wiring and fixtures based on job terms and city regulations
- Followed standards and procedures to keep a safe working environment
- Installed new water meters
- Dug trenches, backfilled holes, and compacted the earth to prepare for new construction
Laborer
Coweta barn and fence
Coweta, US
07.2020 - 12.2020
- Gathered and disposed of work site debris to eliminate safety hazards and increase team productivity
- Organized materials, tools, and equipment to ensure that team members had what they needed
- Interpreted job site supervisor's orders and technical documentation to complete accurate work
- Moved material to and from storage and production areas by loading, unloading, and moving it
- Read blueprints and job specifications carefully in order to plan the completion and estimated costs of each job
- Transported materials and tools from trucks and storage facilities to job sites and organized them for anticipated requirements
- Read blueprints to build pole barns to specific customers wants
- Took measurements and laid out materials for building fences
- Worked quickly and accurately to ensure that production standards were met on a consistent basis
- Worked as part of a team to meet deadlines and complete tasks on time
Laborer
Logos Trading Post, LLC
Tulsa, US
03.2020 - 07.2020
- Gathered and disposed of work site debris to eliminate safety hazards and increase team productivity
- Safely shut down or redirect traffic on bridges
- Reconstruct concrete bridges
- Directed traffic away from dangerous areas, ensuring the safety of team members and the general public
- Used precision measuring instruments, templates, and fixtures to check finished workpiece dimensions for conformance to specifications
Laborer
Honeywell
Tulsa, US
10.2019 - 02.2020
- Collaborated with team members to complete efficient work while maintaining the highest level of safety and adhering to schedules
- Interpreted job site supervisor's orders and technical documentation to complete accurate work
- Built conveyer systems for a new warehouse
Welder's Helper
Wyatt Construction
Watford City, US
08.2019 - 10.2019
- Prepared job sites efficiently by clearing debris and setting up materials and tools
- Grind previous welds
Terminal Operator
Safety-Kleen Systems
Catoosa, US
03.2019 - 07.2019
- Cleaned the strainer and performed basic injection well maintenance, tightened and inspected hoses and gauges, cleaned empty tanks, and ensured that all equipment was in working order
- Collaborated with colleagues to explain shipping and receiving processes, ensuring that facility personnel were well-versed in terminal procedures
- Ensured that chemicals and petrochemicals were handled safely through tank transfers, truck tank loadings, and off-loadings
Bouncer
Rodeo Nightclub
Tulsa, US
03.2018 - 06.2019
- Provided ticket stubs, wrist bands, and hand stamps to patrons as proof of proper admission
- Investigated suspicious activities and used appropriate physical or verbal techniques to resolve concerns
- Used a safety procedures to pat down customers to ensure safety
- Performed CPR and first aid to resuscitate individuals while waiting for emergency medical responders to arrive
- Used radios and telephones to communication with security team members and building supervisors
- Remained calm, assertive, and mindful to think critically and solve problems during stressful situations
Frac Technician
First Choice Energy Services
Yukon, US
02.2017 - 02.2018
- Kept track of all company inventory by monitoring multiple databases
- Maintain fuel in equipment
- Collaborated effectively with coworkers in fast-paced, dangerous, and intense environments
Education
High School -
Memorial High School
Tulsa, OK01.2015
Skills
- Fast learner
- Working night shift
- Heavy Equipment Operation
- Pipe laying
- Hiring and staffing
- Strong work ethic
- Construction
- OSHA Certified
- Valve assembly
- Equipment testing
- Team communication
Timeline
Valve Technician
Total Valve Systems
05.2024 - Current
Apprentice Plumber
Air Assurance
10.2023 - 05.2024
Traffic Control
Advanced Workzone Services
02.2023 - 10.2023
Utility pole Inspector Foreman
Osmose Utilities Services
07.2022 - 01.2023
Heavy Equipment Operator
Ira M Green Construction
01.2022 - 06.2022
Frac Equipment Operator
Calfrac Well Services Corporation
10.2021 - 01.2022
Equipment Operator
Davis H Elliot Co Inc.
03.2021 - 09.2021
Apprentice Plumber
All American Plumbing
01.2021 - 03.2021
Laborer
Coweta barn and fence
07.2020 - 12.2020
Laborer
Logos Trading Post, LLC
03.2020 - 07.2020
Laborer
Honeywell
10.2019 - 02.2020
Welder's Helper
Wyatt Construction
08.2019 - 10.2019
Terminal Operator
Safety-Kleen Systems
03.2019 - 07.2019
Bouncer
Rodeo Nightclub
03.2018 - 06.2019
Frac Technician
First Choice Energy Services
02.2017 - 02.2018
High School -
Memorial High School
Similar Profiles
STEVEN HARPERSTEVEN HARPER
Regional Sales and Regional Manager at Total Valve and EquipmentRegional Sales and Regional Manager at Total Valve and Equipment
Emmanuel OkoEmmanuel Oko
Control Valve Technician at A&B Valve & Piping SystemsControl Valve Technician at A&B Valve & Piping Systems
Christian MeilerChristian Meiler
Flooring Installer at Total Flooring SystemsFlooring Installer at Total Flooring Systems