Cesar Velez

• Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
• Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.
• Tested continuity of circuits with testing devices such as ohmmeters, voltmeters and ammeters.
• Ensured that all work was completed in accordance with applicable codes.
• Constructed control panels from blueprints or schematic drawings.
• Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
• Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
• Installed conduit, wire and motor controls.
• Connected wires to circuit breakers and transformers.
• Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Interpreted schematics, blueprints and diagrams to complete projects on time.

• Obtained proper permits to carry out electrical work on facility and construction projects.
• Took ownership of electrical crew schedule, developing short- and long-term look ahead schedules to align with execution plans.
• Reviewed and monitored cost and man-hour budget for installation process to develop staff facilities, equipment and tool requirement plan.
• Followed electrical code manuals to install and repair electrical systems.
• Supervised job site operations to maintain consistent safety and hazard-free work area.
• Promoted safety and work site awareness by identifying and removing potential hazards and effectively training team members in safety protocols.
• Meticulously tested installations to check continuity of circuits and compatibility and safety of components using test equipment such as ohmmeter, amp meter, voltmeter and oscilloscope.
• Provided empowering leadership to ensure positive production outcomes and consistent team morale.
• Tested electrical equipment and components for continuity, current, voltage and resistance.
• Communicated with clients to convey deadlines, scope of work and potential challenges throughout project timeline.
• Updated and edited all drawings with design changes requested by client.
• Supervised electrician control room modifications, maintaining complete understanding of work scope, safety and documentation requirements.
• Evaluated job requirements based on client needs and provided estimates of labor and supply costs.
• Ensured safety protocols were followed and maintained for all electrical projects.

I have work with SpaceX High Power division we work on all the fields of electrical work from residential commercial and industrial, solar farm and solar panels applications from Romex cable to 500 kcmils cables from 120-480 services to 4160v switchgears to Batteries packs and Telsa Chargers and solar panels and also motor controls installation we do most of the raceways to emt,rmc, cable tray etc. To equipment installations to fabrication of supports and stands to hangers for tray and conduit aswell to terminations and troubleshooting equipment. Spacex is work by a ticket system for the electricians we are given high priority job scope and its are responsibility of walking down the job scope with the engineering and QA/QC From material, manpower ,equipment needed for scope completion date line. Residential, commercial, industrial work is performed daily we are very independent

• Connected wires to circuit breakers and transformers.
• Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
• Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
• Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
• Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
• Implemented safety systems such as safety relays and emergency stop buttons into PLC programs for safe machine operations.
• Performed preventive maintenance activities on control panels and components to ensure optimal functioning of equipment.
• Performed routine maintenance on electrical systems such as motors, transformers, and generators.

• Assessed materials, parts and products for conformance with quality control requirements and production specifications.
• Adhered to all safety protocols to minimize equipment damage and avoid injuries.
• Wrote detailed reports outlining performance, quality and defect rates.
• Completed non-destructive tests and visual inspections continuously.
• Developed and implemented best practices for defect prevention and continuous improvement.
• Reviewed drawings and blueprints to determine appropriate level of inspection required.
• Consulted with engineers to resolve quality, production and efficiency problems.
• Completed and signed off on repair and maintenance documentation for submission to samsung. Secure tool equipment is installed to code standard

• Installed conduit, wire and motor controls.
• Connected wires to circuit breakers and transformers.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Interpreted schematics, blueprints and diagrams to complete projects on time.
• Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
• Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Planned and installed complicated circuit systems in both commercial and residential construction.
• Tested entire electrical assembly for performance levels and safety concerns.
• Performed electrical utility services for industrial-based and new building projects.
• Rectified issues with EMCS and variable frequency drive systems by troubleshooting and correcting problems.

• Planned, laid out and installed electrical wiring, equipment, and fixtures around local codes and job specifications.
• Performed general electrical maintenance.
• Performed electrical utility services for industrial based and new building projects. Fab and installed conduit,cable tray ,underground work, grounding , 120/240 services

• Executed daily operations of preventive maintenance on electrical panels, motor controls and switch gears.
• Changed HVAC filters and cleaned condensation drains to perform preventative maintenance on HVAC systems.
• Applied hazard prevention procedures according to regulatory mandates, including assessing electrical appliances and connections.
• Contributed to operational quality and efficiency by calibrating instruments, applying controls and implementing maintenance functions.
• Inspected electrical components to identify defects and hazards and make necessary adjustments.
• Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities.
• Inspected components of industrial equipment to determine accurate assembly and oversaw installations to prevent defects such as loose connections and frayed wires.
• Disassembled overhead crains and plasma cutters machinery and equipment to remove parts and make repairs.
• Examined and created solutions for high voltage electrical system problems.
• Tested entire electrical assembly for performance levels and safety concerns.
• Assessed, tested and operated variety of electrical components and systems.
• Implemented safety systems such as safety relays and emergency stop buttons into PLC programs for safe machine operations.
• Identified root cause of complex electrical control system malfunctions through fault isolation techniques.
• Configured relays, motor starters, contactors, push buttons, switches into functional units.
• Performed preventative maintenance on all electrical systems including motors, switchgear, transformers, starters and other related equipment.

• Followed NEC state and local building regulations.
• Planned, laid out and installed electrical wiring, equipment, and fixtures around local codes and job specifications.
• Troubleshot electrical issues using appropriate testing devices.
• Performed general electrical maintenance.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Placed and installed safety systems, including emergency lighting, uninterruptible power systems and battery systems.
• Drafted wiring layouts and developed plans for installation, selecting equipment and fixtures according to code and project specifications.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Performed electrical utility services for industrial based and new building projects.
• Tested electrical systems and circuit continuity using ohmmeters, voltmeters or oscilloscopes.
• Used test equipment and hand tools to locate root causes of electrical issues and establish repair plans.
• Tested entire electrical assembly for performance levels and safety concerns.
• Installed conduit, wire and motor controls.
• Troubleshot electrical control circuits using meter,meger .

• Performed electrical utility services for industrial based and new building projects.
• Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
• Tested electrical systems and circuit continuity using ohmmeters, voltmeters or oscilloscopes.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Developed accurate estimates and proposals for residential wiring.
• Placed and installed safety systems, including emergency lighting, uninterruptible power systems and battery systems.
• Operated, set up and repaired equipment such as high-pressure boilers and large commercial air conditioning systems.
• Assessed, tested and operated variety of electrical components and systems.
• Interpreted schematics, blueprints and diagrams to complete projects on time.
• Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
• Utilized wide breadth of testing equipment to assess electrical systems, circuit continuity and accessory fixtures.