- Fluent in both, Spanish and English.
Christian Ivan Sierra
Brownsville,Tx
Summary
Commissioning tech. with 10- plus years of operations, maintenance, planning, environmental quality control & safety management. Expertise in quality and production program, highly motivated, incorporates excellent interpersonal communication skill to develop the job and executes strategic objectives. Supervisor and inspector in the production area. supervising and assigning tasks to meet deadlines. and verifying the quality of work assigned to each worker.
Overview
12
12
years of professional experience
Work History
Mechanical Electrician
Triad Electric & Controls
Cameron LNG
- Quality inspector in the electrical area. where all the jobs reported as finished were reviewed in detail to present to the client.
- Duties
- Quality Control
- Terminating devices, and Junction boxes
- Verification of cable tray, termination on power and control cables.
- Worked with MCC’s and powerhouse
- Verification with production all work and check for client and company standards.
Mechanical Electrician
EIU INC | Navitas Gas plant
Midland, Tx
- Electrical dep. Perform all types of electrical work.
- Landing and terminating devices, J-Boxes etc.
- Install maintain and repair electrical wiring
- Cable tray installation, power Box installation
- Read and understand electrical blueprints.
- Termination on power and control cables
- Loop checks
- Prepare and run cable tray
Electrical Commissioning Technician
Seatrium Amfels
Brownsville, Tx
03.2019
- Electrical commissioning tech, working with engineering, quality, and ABS compliance with legal and regulatory requirements related to the areas of production, commissioning testing and quality. Implement strategies and planning completion dates together with production. Quality and safety department to strengthen the operations of the systems, working together with Client /ABS/ USCG
- Commissioning Duties
- Inspection, pre comm. and commissioning on electrical systems (PMS System, paga i ventilation, steering gear lifeboat, cranes, engine generator, etc.)
- Inspection, pre comm. and commissioning on power and control for different Voltages (High, mid, and low v. 6600 vac, 480 v, 220 v, 120 V, 24 V.)
- Inspection, pre comm. and commissioning 1/0 alarms working with Kongsberg System.
- Inspection, pre comm. and commissioning auxiliaries’ generators. (Load test, governor test, function test, black out, parallel test, load sharing, etc. Using a Load Banks and power analyzer.)
- Inspection, pre comm. and commissioning Mechanical Sys. (Bilges, Ballast, fire and gas, fuel, lube oil, composite boiler incinerator, tank gauging, remote control valves)
- Inspection, pre comm. and commissioning TGE system for Con LNG operations.
- Inspection, pre comm. and commissioning all pumps and motors monitoring amperage, voltage, suction, and discharge pressure
- Perform PLC evaluation, troubleshooting and chance (Automation and 1/0 alarms - working with Kongsberg technician
- Test procedure/memo creation and completion, fill up with client, ABS and USCG
- PLC skills (PLC Allen Brandley Rs Logics 500 and RS Link)
MMR Constructors inc.
Corpus Christi
10.2013
- Working on an Electrical Dept. Perform all types of electrical works, in construction, maintenance, rebuilt (redlines), removal, operations, troubleshooting, testing and inspection of energized or deenergized electrical equipment.
- Duties
- Trouble shouting and problem solving of instruments on loft values, limit switches, solenoid valves, auto control value and other equipment and instruments.
- Perform loop checks, test equipment.
- Read electric blueprints and making red lines for engineering
- Termination on Electric cables
- Sell to Q.C dept. and client.
- Megged electrical cables.
- Installation of cable tray and supports
- Function testing, preventative maintenance
- Customer checkout
- Worked with MCC’S, LER’S, battery rooms etc.
- Working with different Voltages (High, mid, and low v. 13,800 vac, 480 v, 220 v, 120 V, 24 V.)
- 9500 hrs.
Electrical Technician
Mmr Procom
Plaquemine, LA
12.2024 - Current
- Collaborated with construction teams for smooth project completion and adherence to timelines.
- Reduced downtime and increased productivity by maintaining, troubleshooting, and repairing electrical equipment.
- Ensured compliance with local, state, and federal regulations by following strict safety guidelines during all electrical tasks.
- Assisted clients in selecting ideal solutions by providing expert recommendations based on their specific needs.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- VLF tests, where cable resistance is verified,and megger test are also performed.
- Check and work on stress cones, cold shrink and hot shrink
Electrical Technician
Mmr Procom
Lima, OH
09.2024 - 11.2024
- Utilized advanced diagnostic tools such as multimeters, oscilloscopes, and thermal imaging cameras to accurately diagnose electrical issues.
- Documented all maintenance and repair work, creating comprehensive records that facilitated future troubleshooting.
- Implemented safety protocols for handling and installation of electrical components, reducing risk of accidents on site.
- Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
- Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
- Evaluated finished assemblies for compliance with standard procedures and design requirements.
- Interpreted scale drawings of new commissions to determine layout of materials and equipment.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Tested wiring and other system parts for electrical flow and function.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Maintained detailed records of all repairs, maintenance tasks, and inventory for accurate tracking purposes.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers, and dial indicators.
- Assisted in new equipment installations, guaranteeing proper setup and optimal performance.
- Conducted comprehensive inspections of electrical systems to identify potential issues before they escalated.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Safeguarded personnel and equipment by adhering to strict safety protocols during all tasks.
- Enhanced customer satisfaction by providing timely and effective solutions to complex electrical issues.
Electrical Technician
Mmr Procom
Gulf of Mexico Altamira Tampico Tamaulipas
03.2024 - 09.2024
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Tested wiring and other system parts for electrical flow and function.
- Disconnected and removed motors and pumps.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Maintained detailed records of all repairs, maintenance tasks, and inventory for accurate tracking purposes.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers, and dial indicators.
- Assisted in new equipment installations, guaranteeing proper setup and optimal performance.
- Conducted comprehensive inspections of electrical systems to identify potential issues before they escalated.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Reduced downtime by troubleshooting and repairing faulty electrical components promptly.
- Collaborated with cross-functional teams to complete complex projects within deadlines.
- Enhanced team productivity through training junior technicians on best practices and procedures.
- Safeguarded personnel and equipment by adhering to strict safety protocols during all tasks.
- Enhanced customer satisfaction by providing timely and effective solutions to complex electrical issues.
- Upgraded electrical panels and systems in older buildings, enhancing their safety and functionality.
Mechanical Electrician
AD Welding
Brownsville, Tx
06.2015 - 05.2016
- Landing and terminating devices, J-Boxes
- Install maintain and repair electrical wiring
- Cable tray inst. Power boxes installation
- Terminated PIN connectors
- Read Blueprints
Residential and commercial electrician
Logan’s Electric
Brownsville, Tx
01.2013 - 10.2013
- Red prints
- Installation of cable, brakers box, etc.
- Troubleshooting circuits and loops
- Connection and installation on appliances
Education
undefined
UTB | TSC
Brownsville, Tx01.2009
Skills
- Quality Control, adaptable, team player, self-motivated, quick learner, autodidact, multitasking, problem solving
- Use Digital Multimeters, own equipment and tools, PLC Allen Brandley RS Logic 500, and RS Linx
- Organize plans to make work more efficient and at the same time direct other workers to a better result
Languages
Timeline
Electrical Technician
Mmr Procom
12.2024 - Current
Electrical Technician
Mmr Procom
09.2024 - 11.2024
Electrical Technician
Mmr Procom
03.2024 - 09.2024
Electrical Commissioning Technician
Seatrium Amfels
03.2019
Mechanical Electrician
AD Welding
06.2015 - 05.2016
MMR Constructors inc.
10.2013
Residential and commercial electrician
Logan’s Electric
01.2013 - 10.2013
Mechanical Electrician
Triad Electric & Controls
Mechanical Electrician
EIU INC | Navitas Gas plant
undefined
UTB | TSC