Codey Hill
Texarkana,TX
Summary
Highly-motivated employee with desire to take on new challenges. Strong worth ethic, adaptability and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.
Overview
20
20
years of professional experience
Work History
Lead Electrical Battery Maintenance
GreEnergy Resources
Ardmore, OK
07.2023 - Current
- Monitored progress of projects to ensure completion within timeline and budget constraints.
- Meticulously tested installations to check continuity of circuits and compatibility and safety of components using test equipment such as ohmmeter, amp meter, voltmeter and oscilloscope.
- Provided technical supervision and support to Instrumentation and Electrical (I&E) supervisors, Instrument, and electrical planners and contract personnel.
- Provided troubleshooting and analysis for discovered electrical faults, offering potential solutions.
- Coordinated with suppliers, contractors, and clients to ensure project success.
- Oversaw the installation, testing, and commissioning of electrical systems, ensuring adherence to safety and quality standards.
- Trained and guided new employees according to company standards and procedures.
Lead Battery Technician
Airway Services
San Angelo, TX
07.2021 - Current
- Used diagnostics and troubleshooting tools to identify failures and equipment issues.
- Reviewed work orders and discussed with supervisors.
- Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
- Trained and guided employees on correct methods for performing different repairs and maintenance services.
- Used hand and power tools to work safely with different types of batteries.
Electrician
Hill Power and Controls
Nash, TX
05.2020 - 07.2021
- Connected wires to circuit breakers and transformers.
- Traced and diagnosed electrical malfunctions using hand tools and test equipment.
- Interpreted blueprints and technical drawings to correctly assemble panels and control boxes.
- Planned and installed complicated circuit systems in both commercial and residential construction.
- Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
- Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
- Assessed, tested and operated variety of electrical components and systems.
- Installed conduit, wire and motor controls.
- Contributed to various projects, providing value to department, company and client base.
Foreman Electrician
H&K Electric
Nash, TX
12.2015 - 06.2020
- Developed accurate estimates and proposals to perform electrical installations and troubleshooting.
- Installed conduit, wire and motor controls.
- Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
- Contributed to various projects, providing value to department, company and client base.
- Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
- Traced and diagnosed electrical malfunctions using hand tools and test equipment.
- Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
- Interpreted schematics, blueprints and diagrams to complete projects on time.
- Interpreted code requirements for wire and conduit sizes to accurately complete electrical installations.
- Dug trenches to lay conduit, lifted heavy objects and performed other physically-demanding tasks to complete projects.
- Assessed, tested and operated variety of electrical components and systems.
- Analyzed specifications and blueprints to coordinate electrical installations.
- Maintained records, prepared reports and ordered equipment.
- Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
- Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
- Connected wires to circuit breakers and transformers.
- Reviewed and assessed electrical, mechanical and architectural diagrams and specifications to accurately complete projects.
- Interpreted blueprints and technical drawings to correctly assemble panels and control boxes.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Responded to emergency callbacks and provided onsite support.
Roustabout Foreman
KO Construction Management
Casper, WY
04.2014 - 06.2015
- Established and enforced procedures and work standards, promoting team performance and safety.
- Created work crew schedules and delegated assignments.
- Delegated duties to employees based on skillset.
- Obtained specifications and directed work for construction crews.
- Kept production team moving forward for progress in daily site operations.
- Prepared and planned worksites to help jobs run smoothly.
- Trained and monitored employees to teach daily tasks and improve performance.
- Transported equipment from one job site to another.
- Reported project progress, site problems and labor status to supervisors.
- Provided leadership, insight and mentoring to newly hired employees to supply knowledge of various company programs.
Shop Lead/Fabrication Welder
RGA
Texarkana, AR
02.2012 - 03.2014
- Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
- Deposited intermittent tack welds for fit-up and alignment of work assemblies.
- Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
- Prepared material surfaces for welding by removing scale, rust or other foreign matter.
- Selected and installed torches, filler rods and flux according to welding chart specifications.
Apprentice Electrician
IBEW Local 301
Nash, TX
05.2010 - 02.2012
- Adhered to company standards and OSHA regulations for work site safety.
- Gathered required tools and equipment for each task to increase efficiency.
- Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
- Maintained organization, cleanliness and safety in work areas.
- Dug trenches and created holes to pull conduit and install supports.
- Supported journeyman and master electricians in maintaining, operating and repairing electrical systems.
- Installed new electrical components, fixtures and motors.
- Resolved issues with existing systems and replaced malfunctioning parts.
- Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
- Worked in all weather conditions and on multiple types of ladders and mechanical lifts.
- Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
- Completed semi-skilled and skilled work under supervision of fully qualified professionals.
- Followed relevant electrical and building codes for each job.
Apprentice Electrician
IPC Systems
Shreveport, LA
03.2009 - 05.2010
- Gathered required tools and equipment for each task to increase efficiency.
- Adhered to company standards and OSHA regulations for work site safety.
- Inspected existing wiring to identify short circuits.
- Dug trenches and created holes to pull conduit and install supports.
- Maintained organization, cleanliness and safety in work areas.
- Supported journeyman and master electricians in maintaining, operating and repairing electrical systems.
- Installed new electrical components, fixtures and motors.
- Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
- Completed semi-skilled and skilled work under supervision of fully qualified professionals.
- Listened to directives of senior electrical professionals to complete efficient tasks.
Metal Fabricator
Ledwell
Texarkana, TX
05.2004 - 06.2008
- Constructed and assembled structural metal components and products.
- Performed cutting work while adhering to blueprints and design specifications.
- Performed welding, grinding and finishing tasks on fabricated structures.
- Provided on-the-job training and coaching for new team members.
- Set up and operated rollers, flame cutters and drill presses.
- Measured and marked cutting and bending lines according to instructions.
- Operated fabricating machines to bend and assemble metal components.
- Powered up, calibrated and shut down fabricating machinery according to company regulations.
Education
High School Diploma -
Hooks High School
Hooks, TX05.2004
Skills
- Specification Reading
- Physical Stamina
- Decision Making
- Problem Solving
- Valid Driver's License
- Hardworking and Dedicated
- Work Orders and Documentation
- Work Area Cleanliness
- Willing to Learn
- Multitasking and Prioritization
- Electrical System Maintenance
- Customer Relations
- Diagnosis and Repair
- Coordination with Service Team
- Attention to Detail
- Safety Policies and Procedures
- Clean Driving Record
- Scheduled Maintenance Planning
- Heavy Equipment Operation
- Visual Inspection
- Time Management
- Team Player
- System Retrofitting
- Hand and Power Tool Operation
- Documentation and Recordkeeping
- New Employee Training
- Parts Fabrication
- Schematic Interpretation
Timeline
Lead Electrical Battery Maintenance
GreEnergy Resources
07.2023 - Current
Lead Battery Technician
Airway Services
07.2021 - Current
Electrician
Hill Power and Controls
05.2020 - 07.2021
Foreman Electrician
H&K Electric
12.2015 - 06.2020
Roustabout Foreman
KO Construction Management
04.2014 - 06.2015
Shop Lead/Fabrication Welder
RGA
02.2012 - 03.2014
Apprentice Electrician
IBEW Local 301
05.2010 - 02.2012
Apprentice Electrician
IPC Systems
03.2009 - 05.2010
Metal Fabricator
Ledwell
05.2004 - 06.2008
High School Diploma -
Hooks High School
Similar Profiles
SYLVIA NAKIMULISYLVIA NAKIMULI
Intern, Human Resources at Greenergy UgandaIntern, Human Resources at Greenergy Uganda
Rizzalyn PaulateRizzalyn Paulate
Inventory Analyst at Greenergy Fuels Canada Inc.Inventory Analyst at Greenergy Fuels Canada Inc.
Azreena Binti AzimuddinAzreena Binti Azimuddin
MANAGER at CALTEX AZALI RESOURCES SB & INAMIRA RESOURCES SBMANAGER at CALTEX AZALI RESOURCES SB & INAMIRA RESOURCES SB