Codey Mathews

• Worked on both dead and energized lines.
• Responded to emergencies and outages that required additional labor and assistance for repairs.
• Removed old poles and hardware and replaced with new equipment.
• Installed, spliced and maintained overhead and underground power lines for residential and commercial customers.
• Trained new team members in proper procedures, fostering a safe and efficient work environment.
• Assisted in emergency storm restoration efforts, restoring power to affected communities as quickly as possible.
• Followed all safety protocols and regulations while working at height and with live electricity.
• Inspected power lines for any damage or irregularities and replaced components.
• Maintained a strong safety record by diligently adhering to OSHA regulations and company policies, ensuring the well-being of both team members and the public.

• Maintained a safe working environment by following strict safety protocols and ensuring proper use of personal protective equipment.
• Optimized power distribution efficiency through skilled installation, repair, and maintenance of underground cables.
• Supported team members in accomplishing shared goals by providing assistance when needed and sharing knowledge on best practices.
• Collaborated with engineers to develop plans for upgrading existing underground infrastructure to enhance reliability and efficiency.
• Removed old poles and hardware and replaced with new equipment.
• Worked on both dead and energized lines.
• Performed maintenance and reconducting work in varied weather conditions.
• Responded to emergencies and outages that required additional labor and assistance for repairs.
• Installed and maintained overhead and underground electrical power lines and auxiliary equipment.
• Inspected power lines and poles for signs of damage or wear, interference, and degradation, and reported findings to supervisor.

• Constructed new power lines, contributing to the expansion and improvement of the electrical grid.
• Restored power to thousands of customers following severe weather events, ensuring minimal downtime for affected areas.
• Collaborated with other linemen to complete complex projects efficiently and within specified timeframes.
• Assisted in the training of apprentice linemen, sharing knowledge and expertise to develop future industry professionals.
• Repaired damaged equipment promptly with a focus on quality craftsmanship and long-lasting results for increased durability.
• Worked on both dead and energized lines.
• Performed skilled aerial work using bucket trucks and climbing gear for efficient access to high-voltage equipment.
• Removed old poles and hardware and replaced with new equipment.
• Installed transformers, switches, and other components to optimize system performance and minimize disruptions.
• Set ground anchors and guying systems for utility poles.

Basic journeyman Lineman responsibility, storm work, maintenance work, setting poles, putting up wire, hanging transformers, driving bucket trucks, driving digger trucks with pole trailer

• Maintained solid safety record with no OSHA-recordable incidents.
• Set ground anchors and guying systems for utility poles.
• Complied with legal regulations and company procedures to achieve high-quality performance in safe working environment.
• Resagged loose lines to prevent failures.
• Measured pole attachments and completed proper fitting and construction according to NESC guidelines.
• Worked on both dead and energized lines.
• Strung cables between structures and lines from poles, towers, or trenches and pulled lines to proper tension.
• Performed maintenance and reconducting work in varied weather conditions.
• Removed old poles and hardware and replaced with new equipment.
• Hooked up transformers to poles and lines.
• Added or removed wire to shorten or lengthen lines, using various types of splices, connectors and clamps.
• Inspected power lines and poles for signs of damage or wear, interference and degradation and reported findings to supervisor.
• Responded to emergencies and outages that required additional labor and assistance for repairs.
• Observed company safety rules and regulations to minimize workplace accidents and reduce electric shocks.
• Installed and maintained overhead and underground electrical power lines and auxiliary equipment.

Basic journeyman Lineman responsibility, maintenance work

• Maintained solid safety record with no OSHA-recordable incidents.
• Set ground anchors and guying systems for utility poles.
• Resagged loose lines to prevent failures.
• Measured pole attachments and completed proper fitting and construction according to NESC guidelines.
• Strung cables between structures and lines from poles, towers, or trenches and pulled lines to proper tension.
• Performed maintenance and reconducting work in varied weather conditions.
• Removed old poles and hardware and replaced with new equipment.
• Hooked up transformers to poles and lines.
• Observed company safety rules and regulations to minimize workplace accidents and reduce electric shocks.
• Installed and maintained overhead and underground electrical power lines and auxiliary equipment.
• Inspected power lines and poles for signs of damage or wear, interference and degradation and reported findings to supervisor.
• Added or removed wire to shorten or lengthen lines, using various types of splices, connectors and clamps.
• Worked on both dead and energized lines.

Spliced cable in splice pits, termed cable in junction boxes, termed cable in substations, toned out cable to insure correct phasing

• Maintained solid safety record with no OSHA-recordable incidents.
• Set ground anchors and guying systems for utility poles.
• Complied with legal regulations and company procedures to achieve high-quality performance in safe working environment.
• Resagged loose lines to prevent failures.
• Inspected and tested lines or cables, recording and analyzing test results to assess transmission characteristics and locate faults or malfunctions.
• Measured pole attachments and completed proper fitting and construction according to NESC guidelines.
• Worked on both dead and energized lines.
• Removed old poles and hardware and replaced with new equipment.
• Performed maintenance and reconducting work in varied weather conditions.
• Hooked up transformers to poles and lines.
• Responded to emergencies and outages that required additional labor and assistance for repairs.
• Installed and maintained overhead and underground electrical power lines and auxiliary equipment.
• Observed company safety rules and regulations to minimize workplace accidents and reduce electric shocks.

• Maintained solid safety record with no OSHA-recordable incidents.
• Set ground anchors and guying systems for utility poles.
• Complied with legal regulations and company procedures to achieve high-quality performance in safe working environment.
• Resagged loose lines to prevent failures.
• Measured pole attachments and completed proper fitting and construction according to NESC guidelines.
• Worked on both dead and energized lines.
• Strung cables between structures and lines from poles, towers, or trenches and pulled lines to proper tension.
• Performed maintenance and reconducting work in varied weather conditions.
• Removed old poles and hardware and replaced with new equipment.
• Hooked up transformers to poles and lines.
• Inspected power lines and poles for signs of damage or wear, interference and degradation and reported findings to supervisor.
• Responded to emergencies and outages that required additional labor and assistance for repairs.

Spliced cable in splice pits, termed cable in switchgear and junction boxes, termed cable in substations, toned out cable to insure correct phasing

• Maintained solid safety record with no OSHA-recordable incidents.
• Set ground anchors and guying systems for utility poles.
• Complied with legal regulations and company procedures to achieve high-quality performance in safe working environment.
• Resagged loose lines to prevent failures.
• Hooked up transformers to poles and lines.
• Removed old poles and hardware and replaced with new equipment.
• Worked on both dead and energized lines.
• Observed company safety rules and regulations to minimize workplace accidents and reduce electric shocks.
• Installed and maintained overhead and underground electrical power lines and auxiliary equipment.
• Responded to emergencies and outages that required additional labor and assistance for repairs.

Spliced and termed cable on a windfarm

Toned out cable to insure phasing

Termed secondary connections in switchgears

Spliced cable on a windfarm project

Toned out cable to insure phasing

PD tested cable after splices where finished

• Worked with construction crews to route and re-route power lines around new builds either via above-ground lines or below-ground utilities.
• Worked to string, splice and transfer wire in both energized and de-energized circuits.
• Responded to emergency repair calls to conduct line switching or sectionalizing to reroute current and speed service restoration.
• Shortened and lengthened wires and lines to connect transformers, lighting units or signals.
• Positioned boom trucks and man lifts to reach lines, transformers and existing connections.
• Installed and removed primary and secondary current transformers and self-contained meters.
• Assisted Journeyman Lineman with work to learn trade and practice techniques.
• Used climbers, bucket lifts and safety equipment for work at heights
• Worked on both dead and energized lines.

• Followed safety protocols to avoid accidents.
• Prepared worksite by setting up required tools and supplies.
• Prioritized and accomplished multiple tasks within established timeframes.
• Positioned and held materials for senior professionals to complete work.
• Drove digger truck
• Drove bucket truck

• Prepared worksite by setting up required tools and supplies.
• Followed safety protocols to avoid accidents.
• Prioritized and accomplished multiple tasks within established timeframes.
• Positioned and held materials for senior professionals to complete work.
• Provided knowledgeable, friendly service to increase customer retention.
• Moved items and tools from truck to work locations.
• Drove digger truck with poles
• Help set poles in between de energized and energized phases