David Mendoza
Austin,TX
Summary
Seasoned Electrician Lead Man with a proven track record at Bergelectric, excelling in electrical installations, repairs, and troubleshooting. Demonstrates exceptional problem-solving abilities and teamwork, ensuring projects meet commercial and residential standards. Achieved significant improvements in efficiency and safety, mentoring apprentices towards mastery in the trade.
Overview
19
19
years of professional experience
Work History
Electrician Lead Man
Bergelectric
Austin, TX
06.2015 - 10.2024
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Performed routine and complex maintenance and repairs on various electrical equipment.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Maintained compliance with local codes and regulations by staying up-to-date on industry standards and best practices.
- Mentored apprentice electricians in proper installation techniques, safety protocols, and troubleshooting methods to enhance their skill sets.
- Coordinated with other tradespeople seamlessly during large-scale installations or renovations to ensure smooth project progressions.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Troubleshot and repaired malfunctioning systems and components.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Examined electrical units for loose connections and broken insulation.
- Followed state and local building regulations based on National Electrical Code.
- Studied building schematics to determine location of wiring and equipment.
Service Electrician
Hood Heating, Air,plumbing & Electric
Concordia, KS
06.2019 - 04.2021
- Established trust with clients through clear communication regarding the scope of work, timelines, and costs associated with each project.
- Enhanced customer satisfaction by efficiently diagnosing and repairing electrical issues in residential and commercial properties.
- Reduced service call times by effectively troubleshooting and resolving electrical problems on the first visit.
- Contributed to a safe work environment by consistently following proper safety procedures while performing job duties.
- Streamlined workflow by maintaining a well-organized work truck stocked with necessary tools and equipment for daily tasks.
- Minimized downtime for businesses by quickly responding to emergency service calls and completing repairs efficiently.
- Worked in houses and small commercial venues to install electrical systems.
- Mentored apprentice electricians, sharing knowledge about proper techniques, code requirements, and best practices in the field.
- Exceeded customer expectations by consistently completing projects ahead of schedule without compromising on quality or safety standards.
- Promoted a positive company image by maintaining a professional appearance and demeanor while interacting with clients, contractors, and coworkers.
- Collaborated with fellow electricians to complete complex projects on time and within budgetary constraints.
- Demonstrated versatility, working on a variety of project types including lighting installations, panel upgrades, generator installs, and system rewiring tasks.
- Assisted customers in selecting appropriate fixtures or devices for their specific needs based on functionality and aesthetic preferences.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Troubleshot and repaired malfunctioning systems and components.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Examined electrical units for loose connections and broken insulation.
- Followed state and local building regulations based on National Electrical Code.
- Installed 120/208 volt systems and 347/600 volt systems.
Foreman
ECI Systems
St George, KS
06.2018 - 06.2019
Apprentice Electrician
Bergelectric
Austin, TX
10.2015 - 05.2018
- Followed all safety procedures and guidelines to promote safety while working on electrical systems.
- Acquired valuable hands-on experience with various types of wiring systems by assisting experienced electricians in diverse installation projects.
- Understood and used proper tools and equipment to install and maintain electrical systems.
- Assisted in the successful completion of various commercial and residential projects by providing reliable support to journeyman electricians.
- Connected wires to circuit breakers, transformers and other components to create working electrical systems.
- Learned and followed latest electrical codes and regulations to deliver compliant electrical systems.
- Installed conduit systems effectively for better wire protection, contributing to overall system longevity and reliability.
- Checked and performed electrical wiring through conduits and holes in walls and floors.
- Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement, or repair.
- Read and interpreted blueprints and electrical schematics to determine layout of electrical systems.
- Participated in after-hours emergency services, demonstrating dedication to customer satisfaction and prompt issue resolution.
- Collaborated closely with other trades on construction sites, fostering a positive working environment for efficient project completion.
- Improved project efficiency through effective communication with team members and supervisors regarding tasks and responsibilities.
- Ensured compliance with local building codes during wiring installations, fostering a commitment to safety and quality within the team.
- Developed expertise in troubleshooting common electrical issues, facilitating quicker solutions to resolve customer concerns.
- Read and interpreted drawings to provide wiring layouts for new installations.
- Handled installation of electrical components by splicing, joining, and connecting wire.
- Terminated wiring and connected circuits with correct techniques.
- Repaired light fixtures, controls, switches, relays, and circuit breaker panels based on detailed evaluations.
- Installed new electrical components and fixtures safely and tested systems to enhance power flow.
- Spliced, joined and connected wire to accurately install new electrical systems.
- Adhered to electrical and building codes when installing and repairing electrical systems or components.
- Pulled EMT and PVC conduit wire according to plans and code requirements.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Followed state and local building regulations based on National Electrical Code.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Installed 120/208 volt systems and 347/600 volt systems.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
Journeyman Electrician
Moffa Electrical Engineering Inc.
Burbank, CA
01.2008 - 09.2015
- Repaired and installed new fixtures, wiring, circuits, and motors.
- Assisted in training apprentice electricians, sharing knowledge, techniques, and best practices for success in the trade.
- Collaborated with other tradespeople to complete complex projects efficiently and meet deadlines.
- Performed troubleshooting to determine issues and appropriate action to complete tasks and provide quality installations.
- Interpreted blueprints, schematics, and diagrams of project requirements and initiated appropriate electrical installations.
- Read technical drawings, diagrams and project documentation to make accurate decisions about electrical system installations and repair work.
- Trained junior electrical professionals on proper procedures.
- Tested electrical systems and components for continuity, current, voltage and resistance.
- Maintained a clean and organized work environment, ensuring optimal productivity during electrical tasks.
- Verified problems, investigated faults, and troubleshot solutions to enhance installations.
- Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
- Troubleshooted systems and repaired equipment, ensuring compliance with all established guidelines.
- Operated tools according to prescribed safety practices.
- Reduced downtime in production facilities by promptly troubleshooting and resolving electrical issues.
- Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment, and handling of materials.
- Assisted in design and installation of electrical systems and components.
- Collaborated with construction teams to ensure electrical installations were completed according to architectural plans.
- Enhanced operational efficiency, organizing and managing inventory of electrical supplies and tools.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Followed state and local building regulations based on National Electrical Code.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Installed 120/208 volt systems and 347/600 volt systems.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Troubleshot and repaired malfunctioning systems and components.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Studied building schematics to determine location of wiring and equipment.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
Apprentice Electrician
Land Mark Electric Inc.
Canoga Park, CA
01.2006 - 01.2008
- Pulled wire through conduits and through holes in walls and floors.
- Organized materials and tools in to maintain clean and neat work areas.
- Kept tools and materials organized, contributing to a clean and safe work area for all team members throughout each project''s duration.
- Followed all safety procedures and guidelines to promote safety while working on electrical systems.
- Acquired valuable hands-on experience with various types of wiring systems by assisting experienced electricians in diverse installation projects.
- Understood and used proper tools and equipment to install and maintain electrical systems.
- Assisted in the successful completion of various commercial and residential projects by providing reliable support to journeyman electricians.
- Connected wires to circuit breakers, transformers and other components to create working electrical systems.
- Learned and followed latest electrical codes and regulations to deliver compliant electrical systems.
- Installed conduit systems effectively for better wire protection, contributing to overall system longevity and reliability.
- Checked and performed electrical wiring through conduits and holes in walls and floors.
- Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement, or repair.
- Read and interpreted blueprints and electrical schematics to determine layout of electrical systems.
- Participated in after-hours emergency services, demonstrating dedication to customer satisfaction and prompt issue resolution.
- Developed expertise in troubleshooting common electrical issues, facilitating quicker solutions to resolve customer concerns.
- Worked under supervision of journeyman electrician to learn trade and develop electrical knowledge.
- Read and interpreted drawings to provide wiring layouts for new installations.
- Handled installation of electrical components by splicing, joining, and connecting wire.
- Terminated wiring and connected circuits with correct techniques.
- Repaired light fixtures, controls, switches, relays, and circuit breaker panels based on detailed evaluations.
- Spliced, joined and connected wire to accurately install new electrical systems.
- Adhered to electrical and building codes when installing and repairing electrical systems or components.
- Pulled EMT and PVC conduit wire according to plans and code requirements.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Followed state and local building regulations based on National Electrical Code.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Installed 120/208 volt systems and 347/600 volt systems.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
Education
Electrical
LA Trade Tech
Los Angeles, CASkills
- Wiring installation
- Electrical repairs
- Electrical installation
- Electrical troubleshooting
- Lighting systems
- Works well in team environment
- Electrical testing
- Circuit testing
- Fixture installation
- Wiring diagrams
- New construction
- Voltmeter use
- Control circuit troubleshooting
- Commercial construction experience
- Wiring termination requirements
- Commercial and residential projects
- Branch circuit wiring
- Pipe installation expertise
- Blueprint fluency
- Diagram interpretation
- Problem-solving
- Conduit bending
- Electrical wiring
- Circuit breaker installation
Timeline
Service Electrician
Hood Heating, Air,plumbing & Electric
06.2019 - 04.2021
Foreman
ECI Systems
06.2018 - 06.2019
Apprentice Electrician
Bergelectric
10.2015 - 05.2018
Electrician Lead Man
Bergelectric
06.2015 - 10.2024
Journeyman Electrician
Moffa Electrical Engineering Inc.
01.2008 - 09.2015
Apprentice Electrician
Land Mark Electric Inc.
01.2006 - 01.2008
Electrical
LA Trade Tech