Derek Brunetto

Similar Profiles

• Rohit RathorRohit Rathor

  <ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group<ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group

• THOMAS QUALLSTHOMAS QUALLS

  <ul> <li>Tack-welded, clamped, and bolted parts to achieve desired specifications for slingshots and Rangers.</li> <li>Analyzed parts for defects and made necessary repairs before sending parts to be inspected.</li> <li>Trainer for welding processes for engine manufacturing.</li> <li>Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.</li> <li>Performed preventative maintenance on welding tools and equipment.</li> <li>Inspected incoming raw materials for non-conforming items and notified suppliers of any discrepancies.</li> <li>Verified proper labeling, packaging, shipping and receiving documentation prior to releasing products from the facility.</li> <li>Replaced defective components or parts as needed.</li> <li>Reviewed technical manuals and other documents related to product operation and maintenance requirements.</li> <li>Tested assembled items with appropriate equipment to ensure proper functioning.</li> <li>Operated a variety of hand tools including drills, saws, grinders, and riveters.</li> <li>Inspected welds for accuracy, strength, and adherence to safety standards.</li> <li>Dismantled defective assemblies using hand tools, power tools, hoists, cranes.</li> <li>Utilized thermal cutting tools including oxy-acetylene torches to cut metal components prior to welding repairs.</li> </ul> at Polaris<ul> <li>Tack-welded, clamped, and bolted parts to achieve desired specifications for slingshots and Rangers.</li> <li>Analyzed parts for defects and made necessary repairs before sending parts to be inspected.</li> <li>Trainer for welding processes for engine manufacturing.</li> <li>Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.</li> <li>Performed preventative maintenance on welding tools and equipment.</li> <li>Inspected incoming raw materials for non-conforming items and notified suppliers of any discrepancies.</li> <li>Verified proper labeling, packaging, shipping and receiving documentation prior to releasing products from the facility.</li> <li>Replaced defective components or parts as needed.</li> <li>Reviewed technical manuals and other documents related to product operation and maintenance requirements.</li> <li>Tested assembled items with appropriate equipment to ensure proper functioning.</li> <li>Operated a variety of hand tools including drills, saws, grinders, and riveters.</li> <li>Inspected welds for accuracy, strength, and adherence to safety standards.</li> <li>Dismantled defective assemblies using hand tools, power tools, hoists, cranes.</li> <li>Utilized thermal cutting tools including oxy-acetylene torches to cut metal components prior to welding repairs.</li> </ul> at Polaris

• Valencia WeaverValencia Weaver

  <ul> <li>Hours per week: 40.</li> </ul> <p><strong>Duties, Accomplishments, and Related Skills:</strong></p> <ul> <li>Supervise and coordinate daily administrative workflows for a team of 15 employees, ensuring timely task execution, adherence to protocols, and consistent performance monitoring.</li> <li>Maintain accurate records and documentation related to property intake, detainee processing, transportation, and deportation; verify and audit files to ensure regulatory compliance, and data integrity.</li> <li>Execute high-volume data entry (up to 8 hours per day), including the entry of case notes, customs documentation, custody logs, and internal reports into secure federal databases.</li> <li>Develop, review, and edit administrative reports and forms for internal use and government audits; ensure completeness, accuracy, and policy alignment.</li> <li>Serve as the primary liaison between facility staff, supervisors, and stakeholders; facilitate clear, professional communication, and documentation flow across departments.</li> <li>Identified discrepancies in data entries and corrected them accordingly.</li> <li>Oversee inventory control processes, including the secure receipt, tracking, and storage of personal property, using standardized procedures and government tracking systems.</li> <li>Conduct routine audits and quality control reviews to ensure that administrative practices meet federal operational standards.</li> <li>Apply sound judgment to evaluate options, solve problems, and make informed recommendations on administrative and operational matters, contributing to efficient workflow management, and compliance with agency standards.</li> <li>Assist in developing and revising privacy and security policies concerning Personally Identifiable Information (PII); identify potential compliance risks, and recommend solutions.</li> <li>Coordinate logistics for detainee transportation to court and medical appointments, manage schedules, and track movement through detailed administrative planning.</li> <li>Conduct roll calls, and ensure accountability through diligent documentation, system updates, and status reporting.</li> </ul> <p>Supervisor: Scott Jackson (949) 456-2706.</p> <p>Permission to contact: Yes.</p> at ProTech USA LLC, Government Contracting<ul> <li>Hours per week: 40.</li> </ul> <p><strong>Duties, Accomplishments, and Related Skills:</strong></p> <ul> <li>Supervise and coordinate daily administrative workflows for a team of 15 employees, ensuring timely task execution, adherence to protocols, and consistent performance monitoring.</li> <li>Maintain accurate records and documentation related to property intake, detainee processing, transportation, and deportation; verify and audit files to ensure regulatory compliance, and data integrity.</li> <li>Execute high-volume data entry (up to 8 hours per day), including the entry of case notes, customs documentation, custody logs, and internal reports into secure federal databases.</li> <li>Develop, review, and edit administrative reports and forms for internal use and government audits; ensure completeness, accuracy, and policy alignment.</li> <li>Serve as the primary liaison between facility staff, supervisors, and stakeholders; facilitate clear, professional communication, and documentation flow across departments.</li> <li>Identified discrepancies in data entries and corrected them accordingly.</li> <li>Oversee inventory control processes, including the secure receipt, tracking, and storage of personal property, using standardized procedures and government tracking systems.</li> <li>Conduct routine audits and quality control reviews to ensure that administrative practices meet federal operational standards.</li> <li>Apply sound judgment to evaluate options, solve problems, and make informed recommendations on administrative and operational matters, contributing to efficient workflow management, and compliance with agency standards.</li> <li>Assist in developing and revising privacy and security policies concerning Personally Identifiable Information (PII); identify potential compliance risks, and recommend solutions.</li> <li>Coordinate logistics for detainee transportation to court and medical appointments, manage schedules, and track movement through detailed administrative planning.</li> <li>Conduct roll calls, and ensure accountability through diligent documentation, system updates, and status reporting.</li> </ul> <p>Supervisor: Scott Jackson (949) 456-2706.</p> <p>Permission to contact: Yes.</p> at ProTech USA LLC, Government Contracting

• JACOB JOHNSONJACOB JOHNSON

  <ul> <li>- Lead and coordinate fiber optic conduit and materials installation on job sites, ensuring accuracy and efficiency.</li> <li>- Install water services and gas services while adhering to safety protocols and utility standards.</li> <li>- Conduct crossbore inspections to identify potential hazards and prevent underground utility conflicts.</li> <li>- Supervise crew activities to maintain productivity, safety, and quality workmanship.</li> </ul> at Five Star Energy Services<ul> <li>- Lead and coordinate fiber optic conduit and materials installation on job sites, ensuring accuracy and efficiency.</li> <li>- Install water services and gas services while adhering to safety protocols and utility standards.</li> <li>- Conduct crossbore inspections to identify potential hazards and prevent underground utility conflicts.</li> <li>- Supervise crew activities to maintain productivity, safety, and quality workmanship.</li> </ul> at Five Star Energy Services