Derek Dingman
Medina,NY
Overview
2026
2026
years of professional experience
Work History
Equipment Installer
Viking Cives of WNY
Oakfield, New York
05.2025 - 10.2025
- Operated hand and power tools for equipment assembly.
- Conducted quality checks on installed equipment for functionality.
- Maintained a clean and organized work environment during installations.
- Followed safety protocols to minimize workplace hazards.
- Assisted in troubleshooting equipment issues during the installation process.
- I manually installed and replaced system components while on ladders, on my hands and knees, and on my back on a creeper in tight areas.
- Installed new equipment according to manufacturer's instructions and safety regulations. I have had occurrences where I needed to adapt per management instructions.
- Adhered strictly to safety protocols while performing installation tasks at customer sites.
- Verified accuracy of system operations by conducting tests after each installation process.
- Inspected, tested and maintained equipment to ensure proper functioning.
- Maintained inventory of supplies, materials and tools to complete work on job sites.
- Prepared detailed reports regarding the status of new installations or repairs made.
- Ensured that all work was completed in compliance with applicable codes and regulations.
- Demonstrated proper use of equipment to reduce accidents and meet health and safety requirements.
- Wired equipment while following safe electrical procedures to eliminate risk.
- Utilized a variety of hand and power tools to cut, shape, and fit materials for installation. As well as welded certain pieces in.
- Documented installation processes and outcomes, providing detailed reports to management.
- Troubleshot and resolved installation issues promptly, minimizing the impact on the project timeline.
- Collaborated with team members to ensure timely project completion.
- Participated in inventory
Labeler Operator
Mizkan Americas Inc.
Lyndonville, New York
09.2020 - 03.2025
- Operated labeling machines to ensure accurate product identification.
- Inspected finished products for label quality and compliance.
- Maintained clean and organized work area for safety and efficiency.
- Collaborated with team members to meet production deadlines.
- Followed safety protocols while handling materials and equipment.
- Assisted in troubleshooting labeling machine issues during operations.
- Documented labeling processes and maintained accurate records.
- Trained new employees on labeling procedures and equipment use.
- Read and interpret product labels to ensure accuracy of information.
- Record data related to production runs on labeler paperwork.
- Ensure accurate placement of labels on products.
- Troubleshoot equipment malfunctions.
- Assist in the development of new methods and procedures to improve quality control processes.
- Changed glue buckets, took the temperature, and put on a heating belt to ensure it is within the proper temperature range.
- Conduct regular safety checks on all equipment used in labeling operations.
- Verify that labels are applied correctly by visually inspecting them.
- Perform necessary adjustments to labelers as needed.
- Provide guidance and training to other team members regarding labeling operations.
- Clean machines regularly.
- Inspect finished goods for correct labeling and packaging according to company standards.
- Identify discrepancies between customer orders and printed labels.
- Monitor machine operation and make minor repairs or adjustments when required.
- Operate manual or automated label applicators to apply labels onto packages or containers.
- Maintain daily production logs for each shift.
- Removed damaged or inferior materials to prepare products for packaging.
- Met or exceeded target for on-time customer shipments.
- Regulated machine flow specifications, speed, or temperature.
- Monitored production line for jams, pile-ups or glue not adhering properly.
- Adjusted machine tension and pressure to accommodate size or product packing angle.
- Participated in inventory
Machine Operator (multiple positions)
Brunner International Inc.
Medina, New York
2017 - 09.2020
- I had multiple positions while with Brunner International. Such as unloader, loader, heat treat tech, low volume drill operator, Diamond Roto Welder operator, and weld mechanic. All are slightly different in nature.
- Monitored equipment for optimal performance and safety compliance.
- Conducted routine maintenance on machines to ensure reliability.
- Loaded raw materials into machines for production runs.
- Collaborated with team members to streamline workflow processes.
- Recorded production data accurately for daily reporting purposes.
- Followed safety protocols to maintain a secure work environment.
- Assisted in training new operators on machinery operations and procedures.
- Adjust machine settings to complete tasks accurately.
- Ensure that safety guidelines are followed at all times while operating machinery.
- Observe machine operations to detect any problems or defects in the finished product.
- Carry out regular safety checks on machinery prior to operation.
- Load raw materials into machines according to specified measurements.
- Comply with company policies regarding quality control procedures.
- Monitor the feed and speed of machines during the machining process.
- Prepared machine for production processes by equipping with required tools and parts.
- Perform periodic maintenance on machines such as cleaning and lubrication.
- Monitored and observed the production line to watch for pileups and jams.
- Troubleshoot malfunctions in equipment or processes.
- Verified production orders prior to starting set-up.
- Collaborate with other departments when necessary for successful completion of projects.
- Replace worn tools, sharpen cutting tools, adjust machinery components.
- Check products for accuracy using measuring instruments such as calipers, micrometers, gauges.
- Read blueprints and job orders to determine product specifications and tooling instructions.
- Identify areas where improvements can be made in terms of efficiency or cost savings.
- Trained new operators
- Performed daily inspections of plant systems, identifying potential problems and taking corrective action as needed. By discussing issues in my specific process, which are affected by processes before mine on the line with the management team, I aim to get it assessed properly.
- Trained personnel on safe handling procedures for hazardous materials used during production processes.
- Promoted efficient operation of production processes through careful control system monitoring
- Responded to and initiated proper corrections to process alarms.
Assembly Riveter
ATB Staffing Service (At snappy)
Medina, New York
2016 - 2016
- Operated a riveter to assemble HVAC products.
- Followed safety protocols and quality standards during assembly tasks.
- Collaborated with team members to ensure efficient workflow and timely production.
- Inspected finished products for defects and ensured adherence to specifications.
- Maintained clean and organized work area to promote safety and efficiency.
- Reported equipment malfunctions and requested maintenance support as needed.
- Monitored inventory levels of supplies used in the assembly process.
- Notified trainers of any discrepancies found during inspection procedures.
- Cleaned work areas at the end of each shift to ensure a safe environment for all personnel.
- Performed quality control inspections on finished products prior to shipment.
- Stacked finished products onto pallets ready for loading onto trucks or containers.
- Removed burrs from metal surfaces.
- Measured, cut, bent, and formed materials using tools such as an ironworker shear and hand shears.
- Assisted workers in operating machines during the assembly process.
- Tested completed assemblies for proper operation before manually palletizing.
- Maintained equipment in good working order by performing regular maintenance checks.
- We conducted an inventory during inventory week.
- Follow safety guidelines when handling hazardous materials or operating machinery.
- Used hand and power tools to create products.
- Fastened sheet metal coverings to surface areas, utilizing riveting.
Engraver/Buffing
Takeform
Medina, New York
- Operated engraving machines for precise design application.
- Prepared materials by cleaning and aligning surfaces before engraving.
- Collaborated with design team to understand project specifications.
- Ensured quality control by inspecting finished products for accuracy.
- Maintained equipment by performing regular cleaning and minor repairs.
- Assisted in inventory management of engraving supplies and materials.
- Followed safety protocols to maintain a safe working environment.
- Documented project details and processes for future reference and training.
- Edited Excel file for engravings using computer-aided design software programs.
- Collaborate with programmers to make light of any issue I had been having.
- Troubleshoot technical problems related to operating systems or hardware components as needed.
- Identify potential issues with machines that may impact production times or quality standards.
- Check engraved products for accuracy against original design specifications.
- Adjust settings on the machine to control speed, pressure, depth of cuts, and other factors during the engraving process.
- Monitor inventory levels of supplies, such as replacement bits and cutting tools.
- Manage daily production schedules by prioritizing projects according to deadlines given by clients.
- Perform routine maintenance on engraving equipment to ensure proper operation.
- Keep detailed records of all jobs completed including customer information, project details, costs.
- Set up and operate engraving machines to cut or carve designs onto materials such as metal, wood, stone, and plastics.
- Discuss the operations of two different processes (engraving and a plica) in order to broaden my own and my fellow co-workers' knowledge of the process on a broader spectrum.
- Load appropriate material into the machine and secure it in place prior to starting the job.
- Inspect finished workpieces for quality assurance purposes before releasing them to clients.
Timeline
Equipment Installer
Viking Cives of WNY
05.2025 - 10.2025
Labeler Operator
Mizkan Americas Inc.
09.2020 - 03.2025
Machine Operator (multiple positions)
Brunner International Inc.
2017 - 09.2020
Assembly Riveter
ATB Staffing Service (At snappy)
2016 - 2016
Engraver/Buffing
Takeform