Dimetri Ellis

• Fit schedule 40 pipes for water chilled cooling system for Microsoft Data center multiple Data Centers in the Valley
• Fit flanges, bevel pipe, Tack pipe.
• Fit t olets and hot tap live lines.
• Layout piping system
• Install pipe rack and supports
• Rig and Install pipes for main lines
• Install expansion joints
• Read blue prints and schematic
• Pre-fab 3" pipe to fan coils
• Air test pipe
• Hydrostatic test
• Install line sets for fan coils and mini splits
• Condensation drain lines
• Brigde Tack for welders on stainless
• Install air duct system, spiral pipping 22"
• Braze a/c lines for mini splits
• Perge lines for brazing
• Weld pipe in Company shop using flux core wire feeder

• Microsoft Data Center Egdecore Project
• Install pre fab carbon steel pipe schedule 40 to existing main lines Tie in to chillers on roof top
• Prep and bevel pipes for welders
• Read iso prints
• Layout, install support
• Install thread outlets , cutting using torch
• Tack pipes
• Slip flanges on pipes
• Solder and braze copper pipes
• Air test and hydro test pipes

American express credit card company break room demolition.

Layout pipe system for fan coils

Branch off main lines using dielectric unions from carbon steel to copper

Install hangers

• Collaborated with team members to troubleshoot and resolve pipe fitting issues.

Install type L copper pipes

Pipe too fan coils

Install new condenser on flanges

Roof and air handler units

Air test using nitrogen tank

Pressure testing

Hydrostatic test

Inspect for leaks

• Lay Piping System for Refrigeration Lines
• Install Supports
• Install Pipes 3/8" to 1 3/4"
• Clean and Brazer Joints using Turbo Torch
• Test Piping System with Nitrogen
• Inspect every weld for leaks.
• Following Pressures testing procedures
• Drain Air and repair if needed
• Make sure pipe is 100% leak proof
• Carbon Steel Piping can be tested after with Hydrostatic Test
• Layout and Install condenser
• Flare, swedge Piping to units
• Vacuum Piping system for Refrigeration Tech.
• Insulate pipe
• Label pipe
• Puch list

• Demolition taking out pump motors
• Cutting schedule 40 pipe 16 inch
• Rigging and using mobile router a bout cable lifts
• Using heavy mobile Gantry system to move motor and pump
• Pressure testing using air Hydrostatic Test
• Replacing motor and pump with a new one.
• Fabricated and installed piping systems for various industrial applications.
• Collaborated with team members to troubleshoot and resolve pipe fitting issues.
• Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
• Measure, cut, thread, groove, bend and install piping according to specifications.
• Measured and marked pipes for cutting and threading.

• Sky harbor airport
• Install mini splits unit in communication rooms for cooling technology
• Install hanger pipe support
• Install small pipe copper type L
• 1/8 to 1 inch pipe
• Work near jet planes outside
• Install refrigeration pipe for mini splits
• Install condenser outside using L brackets with 45 degree support and anchor bolts in concrete wall
• Test with Nitrogen
• Hold pressure for 24 hours
• 
  

• High Rise Apartment Building Downtown Phoenix
• Layout supply and return copper lines for heat pumps
• Install pipes with riser clamps and cush clamps
• Solder riser pipes with stub outs on tee's and caps
• Test lines with air
• Install valves after testing with hose kit

• Drain Lines . Schedule 80 PVC
• Water Pumps On Roof Schedule 80 PVC
• Layouts for pipes and Penetration points Using Laser
• Moving Material
• Teaching my Aprentice how to hang pipe
• Cut and Beveal Pipe

• Cast iron waste drains
• Chill and hot water supply lines
• Copper 5/8" to 2" coppers
• Braze, Soldering sweat fittings
• Move material w/ forklift
• Rigging

• Install Nyron PVC sch. 80 pipes 1 1/4" to 12"
• Fusion weld pipes using Hot Iron
• Soldering Condensation lines for ac units
• Nibco, mega press, zoom lock, and victolic
• Pruge And Brazer lines for Air Handlers Units
• Install water and chemical tanks for irrigation lines
• Layout and install pumps
• Dig trenches for waste lines
• Install Cast Iron pipes in trench
• Prep. Hardware and material installation
• Glue PVC Pipes & CPVC Pipes using primer and glue
• Install commercial sinks chrome pipes

• Trenches,Layout pipes
• Prep and fit pipes for drain and sewer waste
• Work with cast iron, pvc pipe,cpvc pipe and carbon steel pipes.
• Use all types of couplings and Victolic couplings
• Lay out penetration points install hangers and trap supports
• Braze copper pipes
• Soldering Copper pipes
• Repair broken pipes
• Install balancing valves, control valves and flex hose kit
• Fan Coils
• Boilers
• Water Heaters
• Cooling towers
• Operated hand and power tools to execute pipefitting tasks safely.
• Conducted inspections to identify and resolve potential piping issues.
• Assisted in the training of new employees on safety protocols and equipment use.
• Measure, cut, thread, groove, bend and install piping according to specifications.
• Observed safe work rules and utilized fall protection and PPE.
• Read blueprints and diagrams to determine the type of pipe and tools needed for each job.

• Install all thread to the ceiling using hammer drill and support for pipes
• Install unistruts supports trap supports
• Operate manlift and boom lift and forklift
• Pipe fit chill water and hot water lines ..carbon steel schedule. 40
• Help layout and draw penetration points
• Read blueprints
• Rig pipes and install pipes using chain falls and come along
• 17" to 3" Victolic Couplings
• 2" to 1/2" copper Nibco Pro Press
• Install Fan Coils, Ice Machine, Walk in Freezer
• Braze & solder 1"& 1 1/4 " Copper For Gas Line
• Work With Sweat Fittings
• Pipe Out gas lines
• Pipe Out Air Handling Units, Fan Coils
• Pipe Out Condensation lines
• Work on roof for drains and penetration points for pipes
• Thread pipes 3/4" to 1 1/2" using Threading Machine
• Test Pipes With High Pressure Air & water
• Repair leaks in pipes

• Worked at Lime Stone Plant. New project 3month job build new Bag House put columns and steel beams up weld in place.
• Seal weld inside of hopper.
• Weld Carbon Steel Pipes 8" 6" & 4" weld flanges with 6010 & 7018 rods root filll and cap

• Worked on low pressure pipe for power plant fly ash. Fitting flanges on 12" , 8" and 4" pipe

• Work on water water walls, milling, grinding , and cutting water walls out working 7 days a week 12 hour shifts
• Bevealed Water Walls Pipes For Welders using mill hog beveler.

• Weld on cement truck trailer. Reinforcing trailer.