Summary

Overview

Work History

Education

Skills

Languages

Certification

References

Timeline

Edward Pech

Oxnard,CA

Summary

Experienced and dependable general worker with a proven track record of efficiently completing tasks in various settings. Skilled in manual labor, equipment operation, and maintaining a clean and organized workspace. Safety-conscious with a strong work ethic and the ability to adapt to different environments. Ready to contribute to a dynamic team and make a positive impact. Committed job seeker with a history of meeting company needs with consistent and organized practices. Skilled in working under pressure and adapting to new situations and challenges to best enhance the organizational brand.

Overview

years of professional experience

Certification

Work History

Laborer

Tutor Perini

Los Angeles, CA

06.2023 - 07.2024

Performed regular checks of equipment for proper operation and safety compliance.
Poured concrete foundations for structures such as buildings or bridges according to blueprints provided.
Lifted objects weighing up to 50 pounds without assistance when necessary.
Operated various power tools such as drills and saws safely while following manufacturer's instructions.
Cleaned work area after job completion ensuring all debris is properly disposed of.
Organized tools, supplies, and equipment needed for specific jobs according to instructions provided by supervisor.
Loaded or unloaded building materials to distribute machinery or tools.
Learned and mastered skilled trade specialties under guidance of expert mentors.
Controlled traffic passing near, in or around work zones.
Measured, marked or recorded openings or distances to construction layout areas.
Tended pumps, compressors or generators to provide power or heat or move materials.
Dug ditches or trenches, backfilled excavations or compacted and leveled earth to grade specifications.
Signaled equipment operators to facilitate alignment, movement or adjustment of machinery.
Operated equipment with strong focus on safety and ground communication.
Understood how to operate and maintain job site equipment safely and for maximum productivity.
Performed demanding physical work over extended periods and modeled positive attitude.
Gained independent working skills and guided and mentored less experienced team members.
Mixed, poured, and spread concrete, asphalt gravel and other materials.
Performed physical activities requiring heavy lifting, walking and standing for long periods of time.
Used picks and shovels to dig, spread and level dirt and gravel.
Operated pallet jacks and forklifts to load and unload supplies and materials.
Utilized two-way radios and hand signals to coordinate communication between equipment operators.
Collaborated with team members to complete assigned tasks and meet tight deadlines.
Performed repetitive assembly tasks with hand and power tools and automated equipment.

Welder

FM General Engineering

Moreno Valley, CA

10.2022 - 06.2023

Repaired broken or cracked parts using cutting torches and welding equipment.
Monitored the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
Utilized oxyacetylene torches for preheating metals prior to welding or bending them into desired shapes.
Set up welding machines based on the job at hand.
Troubleshot problems related to welds including porosity issues caused by improper shielding gas flow rates.
Ensured that all welds met code requirements through visual inspection methods such as radiography testing where applicable.
Conducted flux core arc welding when applicable.
Determined appropriate filler metal type based on joint design and material being joined together.
Communicated effectively with supervisors regarding progress updates on assigned tasks.
Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.
Read blueprints, drawings related to projects in order to determine proper dimensions of components being fabricated, welded together.
Maintained a clean working environment by removing scrap metal from work areas.
Adjusted settings on machines such as current level so it matches the specifications outlined in blueprints and drawings.
Cleaned joints before beginning any type of welding process by chipping off slag with a hammer or wire brush.
Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
Scraped off excess spatter using portable grinders and arc-cutting equipment.
Prepared broken parts for welding by properly grooving and scarfing surfaces.
Read blueprints and drawings and took measurements to plan layout and procedures.
Adjusted gas flow and pressure to create and maintain desired flames.
Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
Operated manual and semi-automatic welding equipment to fuse metal segments together.
Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
Safely ignited torches and monitored surroundings to proactively identify hazards.
Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
Welded components in flat, vertical, or overhead positions.

Foreman

Nunneley Construction INC

Thousand Oaks, CA

12.2017 - 04.2022

Identified areas of improvement for increased efficiency and productivity.
Resolved conflicts between workers in a timely manner.
Provided guidance, direction, and technical assistance to crew members.
Created detailed reports on job progress and submitted them to management on time.
Managed inventory levels of supplies necessary for job completion.
Inspected tools, materials, and equipment to ensure quality standards were met.
Supervised activities of personnel assigned to various tasks during construction jobs.
Coordinated with other departments to ensure project deadlines were met.
Communicated regularly with subcontractors regarding project timelines.
Assessed work area conditions for potential hazards or risks.
Monitored job progress and ensured completion within budget constraints.
Complied with federal and company regulations to maintain high level of job site safety.
Viewed and checked job equipment to determine maintenance requirements.
Communicated with employees to demonstrate high standards and mitigate issues.
Tracked and reported units and labor hours prior to submission of timecards.
Reported project progress, site problems and labor status to supervisors.
Delegated duties to employees based on skillset.
Reviewed project blueprints and specifications to determine number of workers needed to complete jobs.
Prepared and planned worksites to help jobs run smoothly.
Maintain equipment used during construction process in good working condition.
Smooth out freshly poured concrete with trowels and other finishing tools.
Level ground prior to pouring foundation or slab with shovels or grading machines.
Perform minor maintenance tasks on equipment used during construction process.
Assist in demolishing existing structures with jackhammers and other tools as needed.
Set forms for pouring concrete according to blueprints or instructions from supervisor.
Install reinforcement rods in order to add strength to the structure.
Prepare and pour foundations for structures.
Use shovels, hoes, rakes, and other tools to spread or level concrete.
Cut expansion joints into newly laid concrete as needed.
Remove any excess material from the surface of the concrete after it has been poured.
Mix cement and sand to create concrete, following specific measurements.
Inspected and maintained tools and equipment.
Constructed forms to create various concrete structures.
Loaded and unloaded necessary tools, materials, and machines from trucks and trailers.
Positioned wire mesh and rebar to reinforce concrete.
Poured concrete into forms using pump hose and leveled.
Set up and reinforced forms to accurately pour concrete for walkways and other structures.
Reviewed blueprints and other drawings to identify correct grades.
Operated excavators and loaders to prepare site.
Compacted grade using jumping jack or plate compactor equipment.
Planned work based on verbal instructions, blueprints, and written specifications.
Calculated concrete quantities needed for jobs.
Set concrete forms to desired pitch and depth and aligned.
Built forms to specific dimensions to shape wet concrete.
Protected surfaces from avoidable damages by using correct forming, bracing, preparation, and finishing techniques.
Signaled truck driver to pour concrete and move chute, directing concrete on forms.
Spread, leveled and smoothed concrete using rake or shovel.
Produced rough concrete surface using brooms.
Monitored wind, heat or cold throughout curing process.
Installed anchor bolts, steel plates and other fixtures in freshly poured concrete.
Assembled junction boxes according to code requirements.
Repaired faulty or damaged components on existing electrical systems.
Replaced defective circuit breakers, fuses, switches, outlets, lighting fixtures and other components as needed.
Pulled wires through conduit runs using fish tapes or pull strings when necessary.
Inspected transformers and circuit breakers to identify any potential issues before they become major problems.
Installed ground fault circuit interrupter outlets per code requirements.
Read and interpreted blueprints, schematics, diagrams, and technical documents for installation of new systems.
Used hand tools such as wire strippers, cutters to prepare wires for connections to boxes, terminals.
Connected cables from service entrance to meters and main distribution panel boards.
Maintained accurate documentation of all work performed.
Installed conduit systems including EMT, rigid conduit, flexible conduit.
Tested electrical systems to ensure proper functioning and safety.
Ran cable trays for power distribution from main panels to branch circuits.
Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
Cut openings in walls or floors to accommodate the passage of pipes or electrical conduit using power saws or cutting torches.
Installed and maintained electrical wiring, equipment, and fixtures in accordance with local codes and regulations.
Resolved issues with existing systems and replaced malfunctioning parts.
Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
Adhered to company standards and OSHA regulations for work site safety.
Followed relevant electrical and building codes for each job.
Installed new electrical components, fixtures and motors.
Reviewed blueprints and electrical schematics to perform tasks to specifications.
Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
Collaborated with architects on electrical systems design for new construction.
Trained workers to install, maintain and repair electrical equipment and fixtures.
Reviewed blueprints to determine electrical component and wiring locations.
Dismantled electrical components using hand tools to disconnect and restore wiring connections.
Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
Constructed forms for concrete pours in accordance with building codes.
Assisted in the installation of metal framing systems for commercial construction projects.
Installed drywall sheets onto walls or ceilings using nails or screws.
Installed interior trim work such as baseboards and moldings around windows and doors.
Read blueprints, schematics and drawings to determine layout requirements.
Repaired or replaced damaged structures or components.
Built jigs and fixtures to assist in the production of parts.
Provided consultation services for homeowners regarding custom carpentry designs.
Measured, cut and shaped wood materials to specifications using hand tools, such as saws and chisels.
Studied blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.
Installed building windows, trim and cabinetry alone or with assistants to meet job deadlines.
Positioned and installed floor joists, trusses and rafters.
Conducted inspections, diagnosed problems, took measurements and made necessary adjustments to complete projects according to specifications.
Performed various carpentry duties, including both rough and finish carpentry.
Led apprentices and trainees in building construction and renovation.
Used various carpenter's hand tools, portable power tools and standard measuring instruments.
Cut and installed tile and hardwood flooring for residential and commercial buildings.
Consistently constructed square and level projects.
Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
Took accurate measurements to calculate size and amount of materials needed for project completion.
Measured and marked cut lines on materials using ruler or marking gauge.
Installed windows, flooring, or trim using hand or power tools.
Fashioned frameworks or props using hand tools and wood screws, nails or glue.
Covered subfloors with building paper and lay hardwood or parquet floors by nailing to subfloor or cementing to mastic base.
Studied blueprints or building plans to prepare layout and materials required.
Verified trueness of construction using plumb and level.
Erected scaffolding to assemble above-ground structures.
Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.
Adhered to project blueprints and requirements to deliver quality work.
Read technical documents such as blueprints and schematics accurately when necessary.
Inspected welds for quality assurance purposes before finalizing the project.
Replaced worn out electrodes on arc welders regularly for improved efficiency.
Calibrated gauges to measure the correct amount of heat during welding operations.
Installed and welded steel beams, columns, girders, and other structural elements.
Operated cutting torches to cut metal pieces prior to welding them together.
Welded joints in flat, horizontal, vertical, and overhead positions as required by the task at hand.
Determined the proper amperage, voltage settings, and filler metals needed for each job.
Ensured compliance with safety regulations while performing welding duties.
Fabricated metal components according to blueprints and drawings.
Followed established procedures regarding pre-heating temperatures before starting a weld.
Determined welding strategies using metallurgy knowledge, geometry and welding techniques.
Obtained desired configurations by clamping and tack-welding components.
Removed loose materials and thick scale, slag or rust to prepare material surfaces for welding.
Kept complete set of tools and gear for use on each job, including hammers, stinger and socket set.
Maintained clean and tidy work area.
Checked tools, equipment and safety gear for proper performance.
Studied blueprints, drawings, and specifications to determine layout of work.
Set up hoisting equipment to lift and place structural steel items.
Supervised crew members in proper steel placement in locations.
Fabricated steel frames, columns, beams and girders according to blueprints or instructions from supervisors.
Aligned and connected structural components to create safe, long-lasting results.

Carpenter

Redeye Construction INC

Camarillo, CA

06.2015 - 10.2017

Constructed forms for concrete pours in accordance with building codes.
Assisted in the installation of metal framing systems for commercial construction projects.
Operated power tools safely when performing carpentry tasks such as drilling holes into lumber pieces.
Laid out flooring patterns according to design templates or customer specifications.
Installed drywall sheets onto walls or ceilings using nails or screws.
Installed interior trim work such as baseboards and moldings around windows and doors.
Read blueprints, schematics and drawings to determine layout requirements.
Repaired or replaced damaged structures or components.
Fitted door locksets, deadbolts and other hardware on doors according to manufacturer's instructions.
Installed cabinets, fixtures and trim according to plans and blueprints.
Fabricated staircases, doors, window frames and other wooden components for buildings.
Built jigs and fixtures to assist in the production of parts.
Shaped or cut materials to proper measurements using hand tools, machines or power saws.
Studied blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.
Contracted and collaborated with specialty sub-contractors for special trade jobs or installations.
Applied acoustic paneling to ceilings and walls to adjust sound absorption and rebound within rooms.
Procured and completed required permit approvals prior to starting projects.
Anchored and braced forms to complete precise joining.
Used band, circular and compound miter saws.
Cut timber, panels and other wooden materials according to measured dimensions.
Examined buildings and project specifications to determine measurements.
Installed building windows, trim and cabinetry alone or with assistants to meet job deadlines.
Positioned and installed floor joists, trusses and rafters.
Performed various carpentry duties, including both rough and finish carpentry.
Led apprentices and trainees in building construction and renovation.
Used various carpenter's hand tools, portable power tools and standard measuring instruments.
Maintained clean and organized workplace to optimize performance, efficiency and safety.
Covered subfloors with building paper and lay hardwood or parquet floors by nailing to subfloor or cementing to mastic base.
Studied blueprints or building plans to prepare layout and materials required.
Roughed in door and window frames or subflooring in structures undergoing construction or repair.
Erected scaffolding to assemble above-ground structures.
Adhered to project blueprints and requirements to deliver quality work.
Smooth out freshly poured concrete with trowels and other finishing tools.
Level ground prior to pouring foundation or slab with shovels or grading machines.
Set forms for pouring concrete according to blueprints or instructions from supervisor.
Prepare and pour foundations for structures.
Use shovels, hoes, rakes, and other tools to spread or level concrete.
Cut expansion joints into newly laid concrete as needed.
Remove any excess material from the surface of the concrete after it has been poured.
Inspected and maintained tools and equipment.
Mix cement and sand to create concrete, following specific measurements.
Finished surfaces by troweling, floating and brushing following project requirements and specifications.
Positioned wire mesh and rebar to reinforce concrete.
Poured concrete into forms using pump hose and leveled.
Dismantled forms using basic and advanced tools.
Reviewed blueprints and other drawings to identify correct grades.
Operated excavators and loaders to prepare site.
Compacted grade using jumping jack or plate compactor equipment.
Prepared concrete by hand mixing sand and cement.
Built forms to specific dimensions to shape wet concrete.
Monitored wind, heat or cold throughout curing process.
Installed anchor bolts, steel plates and other fixtures in freshly poured concrete.
Assembled junction boxes according to code requirements.
Repaired faulty or damaged components on existing electrical systems.
Replaced defective circuit breakers, fuses, switches, outlets, lighting fixtures and other components as needed.
Assisted in the planning of new installations by studying customer requirements and following approved specifications.
Pulled wires through conduit runs using fish tapes or pull strings when necessary.
Inspected transformers and circuit breakers to identify any potential issues before they become major problems.
Installed ground fault circuit interrupter outlets per code requirements.
Read and interpreted blueprints, schematics, diagrams, and technical documents for installation of new systems.
Connected cables from service entrance to meters and main distribution panel boards.
Installed conduit systems including EMT, rigid conduit, flexible conduit.
Identified problems with circuits or equipment using testing devices such as multimeters or oscilloscopes.
Tested electrical systems to ensure proper functioning and safety.
Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
Cut openings in walls or floors to accommodate the passage of pipes or electrical conduit using power saws or cutting torches.
Installed and maintained electrical wiring, equipment, and fixtures in accordance with local codes and regulations.
Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
Inspected existing wiring to identify short circuits.
Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
Adhered to company standards and OSHA regulations for work site safety.
Followed relevant electrical and building codes for each job.
Installed new electrical components, fixtures and motors.
Reviewed blueprints and electrical schematics to perform tasks to specifications.
Pulled insulated wires or cables through conduits to complete circuits.
Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
Addressed and resolved worksite safety hazards to reduce risk.
Collaborated with architects on electrical systems design for new construction.
Reviewed blueprints to determine electrical component and wiring locations.
Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
Diagnosed malfunctioning wiring using test equipment to locate faults.
Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
Installed leads and connected cables to motors, apparatus and equipment.
Performed troubleshooting and diagnosis on malfunctioning systems or components.
Planned layout and installation of wiring and fixtures based on project specifications and building codes.

Electrical Apprentice

Coastal Electrical Solutions

Santa Clarita, CA

04.2012 - 06.2015

Assembled junction boxes according to code requirements.
Repaired faulty or damaged components on existing electrical systems.
Replaced defective circuit breakers, fuses, switches, outlets, lighting fixtures and other components as needed.
Assisted in the planning of new installations by studying customer requirements and following approved specifications.
Pulled wires through conduit runs using fish tapes or pull strings when necessary.
Inspected transformers and circuit breakers to identify any potential issues before they become major problems.
Installed ground fault circuit interrupter outlets per code requirements.
Read and interpreted blueprints, schematics, diagrams, and technical documents for installation of new systems.
Used hand tools such as wire strippers, cutters to prepare wires for connections to boxes, terminals.
Connected cables from service entrance to meters and main distribution panel boards.
Maintained accurate documentation of all work performed.
Installed conduit systems including EMT, rigid conduit, flexible conduit.
Performed preventive maintenance procedures on electrical systems.
Identified problems with circuits or equipment using testing devices such as multimeters or oscilloscopes.
Tested electrical systems to ensure proper functioning and safety.
Ran cable trays for power distribution from main panels to branch circuits.
Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
Cut openings in walls or floors to accommodate the passage of pipes or electrical conduit using power saws or cutting torches.
Installed and maintained electrical wiring, equipment, and fixtures in accordance with local codes and regulations.
Resolved issues with existing systems and replaced malfunctioning parts.
Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
Dug trenches and created holes to pull conduit and install supports.
Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
Inspected existing wiring to identify short circuits.
Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
Adhered to company standards and OSHA regulations for work site safety.
Set up equipment and configured settings for optimal performance.
Worked in team-based environment to accomplish projects.
Measured and prepared supplies for electrical tasks.
Followed relevant electrical and building codes for each job.
Kept work areas clean, neat and organized for efficient operations.
Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
Installed new electrical components, fixtures and motors.
Reviewed blueprints and electrical schematics to perform tasks to specifications.
Demonstrated strong foundation of safety knowledge and implemented industry best practices.
Completed semi-skilled and skilled work under supervision of fully qualified professionals.
Listened to directives of senior electrical professionals to complete efficient tasks.
Advised management on issues of safety in continued equipment operation.
Pulled insulated wires or cables through conduits to complete circuits.
Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
Collaborated with architects on electrical systems design for new construction.
Led teams and delegated tasks to install, maintain, or repair electrical systems and wiring.
Reviewed blueprints to determine electrical component and wiring locations.
Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
Dismantled electrical components using hand tools to disconnect and restore wiring connections.
Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
Diagnosed malfunctioning wiring using test equipment to locate faults.
Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
Installed leads and connected cables to motors, apparatus and equipment.
Performed troubleshooting and diagnosis on malfunctioning systems or components.
Planned layout and installation of wiring and fixtures based on project specifications and building codes.

Store Associate

B&b Hardware

Camarillo, CA

07.2010 - 03.2013

Organized promotional displays throughout the store in accordance with corporate guidelines.
Identified problems or discrepancies in inventory levels and notified supervisor accordingly.
Answered incoming calls regarding product inquiries or orders.
Operated scanning equipment for price checks and stock replenishment.
Maintained knowledge of current promotions, policies concerning payment and exchanges.
Resolved customer complaints promptly with professionalism and courtesy.
Adhered to safety regulations when handling hazardous materials.
Ensured the cleanliness and tidiness of the store.
Assisted customers with product selection based on their needs and preferences.
Assisted with loading and unloading deliveries from vendors.
Demonstrated excellent customer service skills at all times.
Utilized computer systems for order entry, tracking, invoicing and other related tasks.
Maintained store cleanliness by sweeping floors, dusting shelves, and removing trash.
Assigned duties such as restocking shelves or cleaning work areas to team members.
Verified accuracy of promotional signs within store environment.
Stocked shelves with merchandise and maintained inventory levels.
Addressed customer complaints in a professional manner.
Performed daily opening and closing procedures for store operation.
Welcomed customers, offered to help locate items and suggested merchandise without being intrusive or pushy.

Metal Stud Framer

Armstrong Interiors Construction

Moorpark, CA

02.2008 - 02.2010

Cut drywall sheets and positioned them over the steel frames of the structure.
Assisted in loading and unloading tools and equipment from vehicles onto job sites.
Ensured adherence to building codes related to fire resistance ratings of structural elements.
Fitted insulation materials between the wall cavities and secured them with adhesive tape.
Secured metal framing components with screws or rivets.
Provided guidance and training to apprentices on proper installation techniques for metal framing systems.
Built interior walls by connecting the metal studs together with self-tapping screws.
Utilized ladders or scaffolding platforms when working at heights above ground level.
Measured and cut metal studs to specified dimensions using power saws.
Installed metal studs, tracks, channels and bridging according to blueprints.
Repaired damaged sections of metal framework using welding machines or hand tools.
Maintained a clean work area at all times by sweeping up any debris that may have accumulated during construction process.
Checked for accuracy of measurements on all completed projects before handing them over to clients.
Communicated effectively with supervisors regarding progress updates on projects being worked on.
Lifted heavy objects such as steel beams and girders into position during installation process.
Assembled ceiling grids and installed them in commercial buildings.
Studied blueprints, drawings, and specifications to determine layout of work.
Performed mod assembly, erected and connected structural steel and leveled and torqued connections after steel placement.
Aligned and connected structural components to create safe, long-lasting results.

Education

GED -

GED Testing Services

California

07-2022

Skills

Blueprint Reading
Spanish Fluency
Blueprint Interpretation
Stick Welding
Flux core (FCAW) welding

AWS certified
Forklift Certification
Welding and electrical knowledge
Problem-solving abilities

Languages

Spanish

Professional

Certification

AWS Welding certifications with FCAW/Semi-Automatic and SMAW Manual process
LADBS Certified Structural welder
LIUNA union training and certifications Blueprint reading, concrete removal and replacement, forklift safety, lead awareness, scaffold user,skid steer, rigging and signaling and general construction.

References

References available upon request.

Timeline

Laborer

Tutor Perini

06.2023 - 07.2024

Welder

FM General Engineering

10.2022 - 06.2023

Foreman

Nunneley Construction INC

12.2017 - 04.2022

Carpenter

Redeye Construction INC

06.2015 - 10.2017

Electrical Apprentice

Coastal Electrical Solutions

04.2012 - 06.2015

Store Associate

B&b Hardware

07.2010 - 03.2013

Metal Stud Framer

Armstrong Interiors Construction

02.2008 - 02.2010

GED -

GED Testing Services

Edward Pech

Summary

Overview

Work History

Laborer

Welder

Foreman

Carpenter

Electrical Apprentice

Store Associate

Metal Stud Framer

Education

GED -

Skills

Languages

Certification

References

Timeline

Laborer

Welder

Foreman

Carpenter

Electrical Apprentice

Store Associate

Metal Stud Framer

GED -

Similar Profiles

James PowellJames Powell

Mike LuevanoMike Luevano

Eric JensenEric Jensen

Shea GormleyShea Gormley

Vanessa ZavalaVanessa Zavala