Edward / Ed Crangle

• Performed detailed inspections to assess vehicle damage and establish repair plans.
• Executed high-quality repairs using advanced collision repair techniques and equipment.
• Collaborated with team members to enhance workflow efficiency and minimize downtime.
• Trained new technicians on safety protocols and best practices in collision repair.
• Maintained accurate records of repairs, parts used, and labor hours for each job.
• Implemented process improvements that reduced cycle time for vehicle repairs.
• Ensured compliance with industry standards and regulations throughout repair processes.
• Assisted management in developing standard operating procedures for various repair processes, resulting in increased efficiency across the team.
• Kept up-to-date with industry advancements through continuous learning initiatives, including attending workshops and seminars on new technologies and techniques.
• Mentored junior technicians in the proper use of tools and equipment, fostering a culture of knowledge-sharing among team members.
• Took initiative to address any potential safety hazards or workflow inefficiencies, resulting in continuous improvements to shop operations.
• Collaborated with insurance adjusters to ensure accurate estimates and efficient claim processing for customers.
• Enhanced workshop safety by conducting regular equipment inspections and enforcing proper use of protective gear.
• Performed thorough post-repair inspections to ensure all work met or exceeded company standards before returning vehicles to customers.
• Contributed to a positive workplace culture through active participation in team meetings and collaborative problem-solving efforts.
• Maintained a high level of work quality through meticulous attention to detail in repairing damaged vehicles.
• Utilized computerized measuring systems to accurately assess vehicle damage, enabling precise repairs and alignments.
• Replaced and repaired vehicle parts according to work order instructions.
• Installed and removed body panels, doors and fenders of vehicles to access areas of repair.
• Utilized collision repair hammers, welders and grinders to address bodywork needs.
• Followed standard operating procedures to achieve consistent quality of work.
• Reassembled and replaced parts to complete body repairs.
• Inspected vehicles to identify and document repair needs.
• Inspected new parts and areas of repair to verify correctness and quality.
• Tested and adjusted newly repaired vehicles to verify proper function.
• Evaluated OEM manufacturer schematics and service documentation to identify parts to order.
• Created and reviewed work orders detailing required repairs per shop and manufacturer guidelines.
• Utilized computer-aided design software to design and fix body parts.
• Diagnosed and repaired various mechanical and electrical problems on diverse vehicle makes and models.
• Filled, sanded and smoothed surfaces to prepare for painting.
• Prepared surfaces for priming, painting and refinishing.
• Installed and repaired body panels, doors, hoods, fenders, bumpers and other parts.
• Replaced glass, headlights and other lighting and electrical components.
• Examined vehicles to determine extent of damage and repairs required.
• Installed interior and exterior trim, including moldings and emblems.
• Inspected completed repairs for accuracy, quality and safety.
• Used welding and cutting tools to repair metal body parts.
• Applied sealants, caulks and rust preventatives to protect body and paint.
• Performed structural and non-structural repairs on variety of vehicle models.
• Adjusted and replaced doors and windows for proper fit and alignment.
• Aligned and balanced vehicle frames using laser alignment systems.

• Diagnosed vehicle damage and determined repair procedures for various makes and models.
• Operated advanced collision repair equipment, ensuring compliance with safety standards.
• Collaborated with team members to streamline workflow processes and improve repair turnaround times.
• Trained junior technicians on best practices for automotive repair techniques and safety protocols.
• Conducted quality control inspections to ensure repairs met industry standards and client expectations.
• Reduced repair times by streamlining workflow and optimizing technician schedules.
• Enforced compliance with safety regulations when operating equipment.
• Mentored new hires, ensuring compliance with safety protocols and company standards.
• Conducted regular skill assessments to identify training needs and improve team capabilities.
• Implemented best practices for workflow management, resulting in increased productivity.
• Facilitated ongoing training sessions to promote continuous learning among crew members.
• Collaborated with leadership to refine training programs based on feedback and performance metrics.
• Taught new team members correct procedures for all areas of operations.
• Evaluated crew members'' progress and provided constructive feedback for continuous development.
• Conducted hands-on demonstrations and practical exercises to reinforce learning concepts.
• Mentored new Crew Trainers, sharing best practices for effective instruction and coaching techniques.
• Documented training and progress on database to enable tracking history and maintain accurate records.
• Analyzed training requirements of crew members to identify areas for improvement, bridge gap and provide resources.
• Aligned and balanced vehicle frames using laser alignment systems.
• Adjusted and replaced doors and windows for proper fit and alignment.
• Performed structural and non-structural repairs on variety of vehicle models.
• Applied sealants, caulks and rust preventatives to protect body and paint.
• Used welding and cutting tools to repair metal body parts.
• Inspected completed repairs for accuracy, quality and safety.
• Installed interior and exterior trim, including moldings and emblems.
• Examined vehicles to determine extent of damage and repairs required.
• Replaced glass, headlights and other lighting and electrical components.
• Installed and repaired body panels, doors, hoods, fenders, bumpers and other parts.
• Filled, sanded and smoothed surfaces to prepare for painting.
• Diagnosed and repaired various mechanical and electrical problems on diverse vehicle makes and models.
• Utilized computer-aided design software to design and fix body parts.
• Created and reviewed work orders detailing required repairs per shop and manufacturer guidelines.
• Evaluated OEM manufacturer schematics and service documentation to identify parts to order.
• Tested and adjusted newly repaired vehicles to verify proper function.
• Inspected new parts and areas of repair to verify correctness and quality.
• Inspected vehicles to identify and document repair needs.
• Reassembled and replaced parts to complete body repairs.
• Followed standard operating procedures to achieve consistent quality of work.
• Utilized collision repair hammers, welders and grinders to address bodywork needs.
• Installed and removed body panels, doors and fenders of vehicles to access areas of repair.
• Replaced and repaired vehicle parts according to work order instructions.
• Utilized computerized measuring systems to accurately assess vehicle damage, enabling precise repairs and alignments.
• Maintained a high level of work quality through meticulous attention to detail in repairing damaged vehicles.
• Contributed to a positive workplace culture through active participation in team meetings and collaborative problem-solving efforts.
• Enhanced workshop safety by conducting regular equipment inspections and enforcing proper use of protective gear.
• Mentored junior technicians in the proper use of tools and equipment, fostering a culture of knowledge-sharing among team members.
• Kept up-to-date with industry advancements through continuous learning initiatives, including attending workshops and seminars on new technologies and techniques.
• Tailored mentoring techniques to suit individual student needs, promoting personalized learning experience.
• Facilitated open communication between crew members, promoting teamwork and collaboration.
• Assessed training needs through regular observation and feedback collection, ensuring relevant and impactful learning experiences.

• Diagnosed vehicle damage using advanced diagnostic tools and equipment.
• Performed high-quality repairs on various makes and models, ensuring safety standards compliance.
• Implemented quality control measures to ensure all repairs met industry standards and customer expectations.
• Collaborated with insurance adjusters to ensure accurate estimates and efficient claim processing for customers.
• Performed thorough post-repair inspections to ensure all work met or exceeded company standards before returning vehicles to customers.
• Enforced compliance with safety regulations when operating equipment.
• Aligned and balanced vehicle frames using laser alignment systems.
• Adjusted and replaced doors and windows for proper fit and alignment.
• Performed structural and non-structural repairs on variety of vehicle models.
• Applied sealants, caulks and rust preventatives to protect body and paint.
• Used welding and cutting tools to repair metal body parts.
• Inspected completed repairs for accuracy, quality and safety.
• Installed interior and exterior trim, including moldings and emblems.
• Examined vehicles to determine extent of damage and repairs required.
• Replaced glass, headlights and other lighting and electrical components.
• Installed and repaired body panels, doors, hoods, fenders, bumpers and other parts.
• Filled, sanded and smoothed surfaces to prepare for painting.
• Diagnosed and repaired various mechanical and electrical problems on diverse vehicle makes and models.
• Utilized computer-aided design software to design and fix body parts.
• Created and reviewed work orders detailing required repairs per shop and manufacturer guidelines.
• Tested and adjusted newly repaired vehicles to verify proper function.
• Inspected new parts and areas of repair to verify correctness and quality.
• Inspected vehicles to identify and document repair needs.
• Reassembled and replaced parts to complete body repairs.
• Followed standard operating procedures to achieve consistent quality of work.
• Utilized collision repair hammers, welders and grinders to address bodywork needs.
• Installed and removed body panels, doors and fenders of vehicles to access areas of repair.
• Replaced and repaired vehicle parts according to work order instructions.
• Utilized computerized measuring systems to accurately assess vehicle damage, enabling precise repairs and alignments.
• Maintained a high level of work quality through meticulous attention to detail in repairing damaged vehicles.

High end European collision shop. Mercedes Benz, Porsche, Jaguar , BMW

• Maintained accurate records of repairs and parts used, facilitating effective inventory management.
• Evaluated OEM manufacturer schematics and service documentation to identify parts to order.
• Enhanced workshop safety by conducting regular equipment inspections and enforcing proper use of protective gear.
• Kept up-to-date with industry advancements through continuous learning initiatives, including attending workshops and seminars on new technologies and techniques.
• Diagnosed vehicle damage using advanced diagnostic tools and equipment.
• Performed high-quality repairs on various makes and models, ensuring safety standards compliance.
• Implemented quality control measures to ensure all repairs met industry standards and customer expectations.
• Performed thorough post-repair inspections to ensure all work met or exceeded company standards before returning vehicles to customers.
• Enforced compliance with safety regulations when operating equipment.
• Aligned and balanced vehicle frames using laser alignment systems.
• Adjusted and replaced doors and windows for proper fit and alignment.
• Performed structural and non-structural repairs on variety of vehicle models.
• Applied sealants, caulks and rust preventatives to protect body and paint.
• Used welding and cutting tools to repair metal body parts.
• Inspected completed repairs for accuracy, quality and safety.
• Installed interior and exterior trim, including moldings and emblems.
• Examined vehicles to determine extent of damage and repairs required.
• Replaced glass, headlights and other lighting and electrical components.
• Installed and repaired body panels, doors, hoods, fenders, bumpers and other parts.
• Filled, sanded and smoothed surfaces to prepare for painting.