Edwin Martinez
Mechanical Engineer
Doha Qatar
Summary
Dedicated mechanical Engineer professional with history of meeting company goals utilizing consistent and organized practices. Skilled in working under pressure and adapting to new situations and challenges to best enhance the organizational brand.
Overview
19
19
years of professional experience
6
6
years of post-secondary education
Work History
Mechanical Engineer
WSP global inc.
Doha
02.2021 - 02.2022
- Attended project planning meetings to coordinate mechanical system designs with structural and architecture teams, mitigate design conflicts and coordinate delivery timelines.
- Communicated project requirements and areas for improvement in design review meetings.
- Suggested cost saving proposals on make-versus-buy analysis or alternative sourcing.
- Reviewed technical drawings developed by CAD technicians and drafters.
- Interfaced with development engineers, scientists and suppliers to resolve quality issues.
- Performed pre-construction, quality and safety management, as well as constructability review, start-up and commissioning.
- Delegated tasks to entry-level engineers, closely monitoring work to monitor quality, maintain speed and exceed daily project goals.
Mechanical Engineer
Al Khaleej Industrial & Consultancy
Doha Qatar
03.2019 - 04.2021
- Attending to Inspection Requests (IR's) (MRI's) submitted by the contractor and take appropriate action in a timely manner.
- Review submitted shop drawings against contract drawings and specifications, local codes and statutory requirements and international best practice.
- Report any works carried out by contractor found to not be in accordance with approved drawing and specifications and report to stakeholders for appropriate action.
- Monitor quality of works and assess the safety at site including health and environmental issues, ensuring compliance with contractual / QCS specifications and safety and health risk assessments.
- Maintain records for daily activities on site including progress photos and ensure they are readily available for inspection as and when required.
- Check and ensure effective co-ordination between disciplines related works and all other disciplines.
- Provide technical input and experiences to resolve any discipline related issues on site that may arise.
- Ability to liaise and coordinate with the other multi-discipline project teams including client and authority liaison for design and construction approvals;
- Develop, coordinate, and monitor all aspects of the product
- Suggest methods to improve operational efficiency
- Work cross-functionally with different teams and organizations
- Keep, monitor and follow up as necessary and maintain complete record(s) concerning the execution of the works.
- Inspection, sampling and testing of materials to assure that compliance with the contract specification.
- Experience substantiating technical concepts with engineering documentation
- Communicating problems to other specialists and recommending potential solutions
- Experience in the mechanical engineering field, development, and/or test, preferably of defense-related components or systems
- Experience maintaining large, complex facility equipment
- Communicate with cross-disciplined, diverse engineering team members and suppliers to analyze capabilities and compliance to requirements
- Communicated project requirements and areas for improvement in design review meetings.
- Identified deficiencies in mechanical processes to develop improvements.
Mechanical Engineer
Shaker Consultancy Group
Doha Qatar
12.2015 - 02.2019
- Attended project planning meetings to coordinate mechanical system designs with structural and architecture teams, mitigate design conflicts and coordinate delivery timelines.
- Communicated project requirements and areas for improvement in design review meetings.
- Suggested cost saving proposals on make-versus-buy analysis or alternative sourcing.
- Reviewed technical drawings developed by CAD technicians and drafters.
- Review the tender & IFC drawings and discrepancies to be reported to PM/RE/Sr. Mechanical Engineer of the project within a maximum 3 weeks of project commencement. Any constructability issues to be identified and reported. Any Request for Information related to specification, drawings, etc. to be raised with the proposed solutions for confirmation from PM/RE/concern party.
- Review and comment on the Contractor material submission, shop drawings, record drawings, as built drawings, method statements, ITPs, 0&M manual, as per contract documents.
- Release the documents within 7 days after the review and in coordination with other trade discipline engineers as required.
- Review and provide comments on the baseline & other program of works including schedule of submission of the project.
- Attend inspection request in the same day (whenever possible) and release the comments on the same day.
- Testing & Commissioning for all system like firefighting, HVAC, Plumbing and Drainage.
- Assist QS in monthly payment certification. Release the executed work percentages within 2 days of receipt of contractor submission.
- Assist PM and QS in drafting related Site Work Instruction. Support the team to advise on the impacts.
- Coordinate with other trade disciplines for smooth project progress.
- Assist PM/RE/Sr. trade discipline in coordinating with the design team as and when required especially for confirming RFI responses.
- Safety Audit/inspection to be executed when Shaker Consultancy HSE personnel not available in the project.
- Weekly or Monthly brief work reports to be provided to PM as required.
- Assist in preparing Client project reports.
- Support the organization as required utilizing the self multi skill knowledge/awareness.
- Provide lessons learnt during the project closure.
- Inspect and prepare snag list and do continuous follow up with the concern to close the issued snag.
- Routine inspections to be carried out to ensure that the Contractor is executing the project as per the contract requirement. Issue ‘NCR’ in consultation with RE/PM as and when non-compliance is noted.
- Actively participate in technical and progress meetings as requested by PM/RE.
Mechanical Engineer
Medgulf Construction
Doha Qatar
10.2014 - 12.2015
- Attended project planning meetings to coordinate mechanical system designs with structural and architecture teams, mitigate design conflicts and coordinate delivery timelines.
- Communicated project requirements and areas for improvement in design review meetings.
- Suggested cost saving proposals on make-versus-buy analysis or alternative sourcing.
- Reviewed technical drawings developed by CAD technicians and drafters.
- Ensuring that the project Mechanical work is carried out in accordance with the required quality, cost and time constraints.
- Coordination and administration of mechanical related material, equipment and drawing submittals in accordance to the specifications.
- Follow up closely procurement schedule and confirmations of delivery for material and equipment.
- Ensuring that the Mechanical subcontractor provides and adheres to the necessary control documentation in an orderly and organized way
- Ensure that As Built Drawings and O&M Manuals and related documentation are prepared, reviewed, submitted and approved in a timely manner and in accordance with contract requirements.
- Attend design coordination meetings with Project Management team, Consultants and other contractors as required
Mechanical Engineer
Terna LLC Qatar
Doha Qatar
10.2012 - 06.2014
- Involve in site QCDD inspection to get project approval.
- Prepare and submit drainage network documents for ASHGHAL approval.
- Prepare inspection reports and supervise Mechanical Testing and Commission activities on site.
- Preparation of DPVL, material submittals for client approval.
- Attends regular meeting with client, civil engineers and consultant to provide update on project progress.
- Generally responsible for implementations and monitoring of all mechanical related works at site as per approved drawings and methods and safety rules.
- Estimates, prepares and assigns the resources such as manpower, materials, consumables, equipment, tools, etc., required for all Mechanical and related works prior to execution. Plans and analysis all possible construction methodologies and recommends the best options to the MEP Manager for approval prior to execution at site.
- Interprets construction drawings and studies the contract documents and applicable standards or specifications prior to execution of any jobs.
- Assign targets for accomplishments and ensure targets are met on daily basis for all Mechanical groups at site.
- Submits site daily reports, inspection requests, estimates and all applicable monitoring reports on regular basis or as required.
- Conduct Weekly walk down at site areas with client and consultants
- Communicated project requirements and areas for improvement in design review meetings.
- Reviewed technical drawings developed by CAD technicians and drafters.
- Identified deficiencies in mechanical processes to develop improvements.
Mechanical Engineer
Al Rashid Constructing
KSA
06.2007 - 06.2010
- To ensure the equipment is erected, pre-commissioned, tested (if required) and commissioned in accordance with agreed contracts. Coordination with equipment suppliers is important task during construction.
- Resolve with the suppliers, clients if there are any non-conformities noticed while discharging the above duties
- Responsible for the records of the tasks as above, which will be the basis for trouble shooting later and may also impact the warranty claims.
- Supervises all installations of machines and Equipment at site thereby ensuring fulfillment of industry standards and requirements.
- Review the works produced by the design engineers and maintains necessary coordination with other discipline engineers for smooth flow of projects.
Mechanical Engineer
AMD Construction
Manila Philippines
07.2000 - 03.2007
- Execution of site works according to the approved drawing.
- Coordinating with subcontractor to carry out the site works and progress.
- Make timely material orders as per site requirement.
- Responsible for the installation & testing and commissioning.
Education
Bachelor of Science - Mechanical Engineering
National University
Manila Philippines 03.1994 - 03.2000
Skills
Microsoft Office Suite
Work Availability
monday
tuesday
wednesday
thursday
friday
saturday
sunday
morning
afternoon
evening
swipe to browse
Quote
There is a powerful driving force inside every human being that, once unleashed, can make any vision, dream, or desire a reality.
Tony Robbins
Timeline
Mechanical Engineer
WSP global inc.
02.2021 - 02.2022
Mechanical Engineer
Al Khaleej Industrial & Consultancy
03.2019 - 04.2021
Mechanical Engineer
Shaker Consultancy Group
12.2015 - 02.2019
Mechanical Engineer
Medgulf Construction
10.2014 - 12.2015
Mechanical Engineer
Terna LLC Qatar
10.2012 - 06.2014
Mechanical Engineer
Al Rashid Constructing
06.2007 - 06.2010
Mechanical Engineer
AMD Construction
07.2000 - 03.2007
Bachelor of Science - Mechanical Engineering
National University
03.1994 - 03.2000
Similar Profiles
Kaylin LynettKaylin Lynett
Engagement Advisor at WSP Global Inc.Engagement Advisor at WSP Global Inc.
Kai-Wen ChenKai-Wen Chen
Project Manager at WSP Global Inc.Project Manager at WSP Global Inc.
Yangsen RongYangsen Rong
Summer Intern at WSP Global Inc.Summer Intern at WSP Global Inc.