Gilberto Garcia

Perform commissioning and startup testing on industrial power and control systems.

Executed CT, DRLO, PI, DAR, winding resistance, and ductor tests on breakers, transformers, and switchgear to ensure compliance and reliability.

Diagnosed relay protection schemes and confirmed operational integrity of switchgear, breakers, and motors to enhance system safety.

Finalized commissioning documentation, test reports, and QA/QC records, ensuring alignment with client specifications and regulatory standards.

·Assist and verify all NETA Testing-Shall be owned by the EC and completed by a NETA Certified party on required equipment

· Inspect all procedures like Megger tests on cabling per customer specification or NEC requirements (whichever is more stringent)

·Ensure all (Vendor and Trade Partner) Documentation and Test reports shall be uploaded to the approved Cx or QA tracking software (Cx Alloy) prior to applying for a RTE Permit. All documentation to be reviewed and approved by the EM.

Completed insulation resistance test reports for Megger and WRT equipment, verifying compliance with safety standards and enhancing equipment reliability.

Maintained detailed torque logs to ensure compliance with engineering specifications.

Compiled MV VLF testing reports to assess condition of high voltage cables, contributing to proactive maintenance and risk mitigation.

Obtained calibration certifications to ensure compliance with manufacturer specifications and regulatory requirements.

Conducted quality inspections and finalized documentation for L1 and L2 processes, ensuring adherence to project standards and regulatory requirements.

Confirm all individuals working on de-energized/locked out equipment are task specific Qualified based on the points below or an equivalent qualified electrical safety training.

· Gray Commissioning Teamshall notify the customer Construction Manager, customer Commissioning, customer CPI Project Manager (if applicable), third-party commissioning vendor, LLE vendor, and controls contractor of the scheduled equipment FOD inspection date(s).

· The FOD schedule shall include ALL individual pieces of equipment and what date they will be inspected. The FOD schedule will align with the Grays overall energization schedule ensured by the commissioning team.

· All OFCI/CFCI equipment and interior compartments shall be FOD’d.

· Complete the FOD checklist in QA/Cx Software. Must be signed and turned into QA/Cx software prior to energization.

· The FOD inspections shall be completed within 24 hours before the equipment is energized.

Energy Marshall Approves the Final FOD Completion and applies Tamper seal.

• SM/Quality/EM and CXM if applicable, to review:

§ Equipment Requested to be Energized

§ Walk down system and previously applied LOTO

§ Roles & Resp.

§ Verify Proper Training(NFPA 70E,QEW,LOTO,First Aid/CPR)

§ Means of communication during energization

§ Verify downstream equipment is in a safe operating condition

§ Shock/Limited/Restricted Approach Boundaries

§ Labels(I.E. Arc Flash, Equipment ID, Energized Equipment labels,Fed To/From)

§ Means of Rescue, i.e. Shepards Hook

§ Review of MOP dry run to ensure clarity.

Supervised contractors on electrical commissioning at Texas and Kansas sites, ensuring compliance with safety and quality protocols while managing commissioning and testing projects.

• Played a key role in meeting tight deadlines for high-profile clients by efficiently managing sewing operations and closely collaborating with other departments to ensure seamless project completion.
• Maintained safe work environment through strict adherence to safety protocols and regular equipment maintenance checks.
• Troubleshot machinery issues promptly, minimizing downtime and maintaining production schedules.
• Enforced compliance with regulations and safety protocols in public events.

• Oversaw daily operations of department, ensuring smooth workflow and timely task completion to meet project deadlines.
• Led team by applying leadership and problem-solving skills, maintaining efficiency and organizing workflows to achieve departmental goals.
• Increased team productivity by implementing efficient workflows and setting clear expectations for staff members.
• Implemented safety protocols to minimize workplace accidents and maintain compliance with industry standards.
• Facilitated communication with regulatory agencies to ensure timely approvals and strong relationships.
• Expedited urgent permit requests through effective prioritization and close coordination with relevant parties, ensuring timely approvals for critical projects.
• Monitored progress of permit applications through various stages, efficiently resolving any issues that arose during the process.
• Implemented systematic approaches to managing high volumes of incoming applications through effective workload distribution among team members while maintaining quality standards.
• Conducted thorough post-approval inspections to ensure permit holders were in compliance with stipulated conditions, maintaining a strong track record of adherence to regulations.
• Established clear communication channels among all involved parties throughout the permitting process, leading to increased transparency and faster resolution of issues.

• Ensured compliance with industry regulations through meticulous attention to detail during inspections.
• Conducted thorough inspections of equipment and facilities, enhancing company safety standards.
• Identified potential hazards and recommended corrective actions to enhance workplace safety.
• Managed walkdown permits and Loto procedures to ensure safety during repair work.
• Facilitated permit coordination with control room to support safe operations.
• Prepared reports detailing findings of inspections, investigations, and tests.
• Upheld codes and regulations governing materials, processes, and procedures.
• Improved quality assurance procedures, minimizing errors and increasing inspection effectiveness.
• Mentored junior inspectors, sharing industry expertise to enhance their skills and abilities in performing thorough inspections.

• Oversaw daily operations of the department, ensuring smooth workflow and timely completion of tasks.
• Increased team productivity by implementing efficient workflows and setting clear expectations for staff members.
• Applied strong leadership talents and problem-solving skills to maintain team efficiency and organize workflows.
• Implemented safety protocols to minimize workplace accidents and maintain compliance with industry standards.
• Facilitated daily inspections with clients to ensure compliance with permit specifications.
• Gathering off information for proper LOTO and permit writing.
• Enhanced customer satisfaction through timely responses to inquiries and effective resolution of concerns.
• Collaborated with departments to achieve organizational goals and foster teamwork across functions.
• Delivered regular updates to management on project status, risks, and opportunities, supporting informed decision-making throughout project lifecycle.

• Provided expert technical support during project planning phases, contributing valuable insights for optimal system design.
• Optimized performance of electrical systems by conducting comprehensive commissioning tests.
• Increased overall system reliability through diligent adherence to established quality standards and best practices.
• Promoted workplace safety by consistently adhering to company policies and regulatory guidelines throughout all tasks performed.
• Adapted to shifting project priorities and unexpected challenges, ensuring project continuity and successful outcomes.
• Guided clients in understanding complex electrical concepts, enhancing their decision-making throughout the project lifecycle.
• Trained new technicians in commissioning procedures, promoting knowledge sharing and continuous improvement within the team.

• Perform VLF acceptance test on 400 high voltage cables.
• Performed VLF maintenance test on High voltage cables.
• Performed TAN DELTA test on all cables.
• Conducted quality control walkdown of high voltage systems to ensure operational readiness.
• Conducted ductor test on transformer and switchgear to verify operational integrity.
• Performed breaker checks .
• Protected critical equipment by implementing careful handling and storage practices during installations.
• Ensured compliance with industry regulations by staying current on codes, requirements, and emerging technologies.
• Strengthened safety protocols through thorough inspection, testing, and troubleshooting of electrical systems.

• Inspected solar battery backs and pre-commissioned UPS systems to ensure compliance with quality standards.
• Rewired battery banks according to customer requirements, enhancing system performance.
• Increased overall system reliability through diligent adherence to established quality standards and best practices.
• Adapted to shifting project priorities and unexpected challenges to maintain project timelines.

• Installed electrical conduit and wiring, ensuring reliable power, control, and lighting functionality.
• Tested wiring and other system parts for electrical flow and function.
• Installed electrical wiring through conduits and holes in both flooring and walls.
• Conducted comprehensive inspections of electrical systems, identifying and addressing potential issues proactively.
• Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
• Inspected equipment for defects and safety hazards and completed necessary repairs.
• Assisted in new equipment installations, ensuring proper setup and enhancing overall system performance.

• Facilitated installation of low to high voltage cables for reliable power distribution.
• Terminated and glanded cables for motors and lighting systems.
• Terminated and troubleshooted lighting systems.
• Performed point to point on all mcc and switchgear buckets, fixing all mis wiring and incorrect breaker or fuse sizes.
• Diagnosed and resolved punch list items, ensuring compliance with project specifications.
• Conducted comprehensive punch list walkdowns to identify and prioritize outstanding issues.
• Adapted mcc buckets according to client specifications, enhancing system compatibility.
• Pulled temporary cables on motor heaters for preservation.

• Streamlined communication among team members by providing clear instructions and fostering collaboration.
• Trained apprentice electricians on best practices, instilling a strong work ethic.
• Collaborated with other electricians to complete large-scale projects on time and within budget.
• Skillfully executed complex electrical tasks such as panel installations, circuit upgrades, and transformer replacements.
• Performed comprehensive inspections on existing wiring systems, identifying potential hazards and recommending corrective actions.
• Troubleshot and repaired malfunctioning systems and components.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.