Sydney Ramsaroop
Queens,NY
Summary
Hardworking HVAC professional offering proven history in managing residential, commercial and industrial HVAC needs concerning new construction and existing equipment with skillful and efficient repairs. Adept at testing and inspecting systems to isolate faults and implement repair plans. Effectively align systems to meet manufacturer specifications and maximize performance.
Overview
5
5
years of professional experience
Work History
Hvac-technician
Tanen Contracting
10.2020 - Current
- Performed troubleshooting on HVAC systems to determine root cause of issues.
- Conducted maintenance service on HVAC systems to increase life expectancy of equipment and prevent costly repair work.
- Investigated major malfunctions and breakdowns of heating and air-conditioning systems and used troubleshooting to determine causes.
- Traveled to job sites for both scheduled and emergency appointments.
- Repaired and replaced motors, bearings and belts.
- Kept accurate records of time and materials used for each job to compile into service reports.
- Worked overtime, holidays and weekends to accommodate company needs.
- Inspected and tested refrigeration systems, safety devices and controls to determine proper functionality.
- Read blueprints, wiring diagrams, piping schemes and engineering specifications to diagnose and repair units.
- Closed out work orders after verifying completion with customers and reporting discrepancies discovered on job site.
- Calibrated equipment to achieve maximum efficiency.
- Maintained boilers, hot water systems, gas heating equipment and food service equipment.
- Replaced bearings, pump seals and packing.
- Evaluated status of refrigeration liquids for safety and compliance purposes.
- Consulted with project management during group installations.
- Surveyed building layout and gathered materials before beginning repairs.
- Monitored building environmental conditions.
- Maintained comfortable environmental temperatures in city facilities.
- Reviewed work of external and internal contractors to guarantee consistency with quality and safety standards.
- Calibrated permanent and portable environmental monitoring equipment.
- Tested chemical levels in refrigerators and freezers to verify compliance with regulations.
- Maintained and repaired industrial chillers weighing up to 20 tons.
- Removed old equipment from customers' homes and cleaned up areas to prepare for new installations.
- Assembled air ducts, pipes, discharge valves and flues to central heating and cooling equipment.
- Installed components to improve HVAC system performance.
- Utilized pressure gauges and soap-and-water solutions to test pipe and tubing joints for leaks.
- Increased longevity of HVAC systems by performing preventive maintenance.
- Installed bypass dampers, low voltage wiring, smoke detectors, split systems, and package units in commercial or residential buildings.
- Responded to emergency HVAC service requests promptly, finding swift resolutions.
- Maintained environmental conditions by rebuilding and replacing faulty components.
- Connected heating or air conditioning equipment to water, fuel, or refrigerant sources to form complete circuits.
- Located and marked pipe positions, hole passages and duct connections in walls and floors.
- Completed thorough inspections of supporting electrical systems to assess continuity and locate faults.
- Discussed heating and cooling system malfunctions with customers to isolate problems and verify corrected malfunctions.
- Optimized performance by balancing systems and calibrating controls.
- Tested automatic, programmable, and wireless thermostats in residential or commercial buildings to decrease energy usage 25%.
- Installed new air conditioning, heating and refrigeration systems according to manufacturer's specifications and local codes.
- Used technical skills, tools, and techniques like soldering to repair parts.
- Troubleshot and diagnosed issues with HVAC and refrigeration units.
- Repaired and replaced faulty motors, blowers, switches and compressor units.
- Repaired, replaced and serviced both residential and commercial HVAC equipment, components, and wiring.
- Worked in strict compliance with applicable OSHA regulations and safety requirements.
- Performed routine maintenance on heating and cooling systems.
- Assisted in maintenance, repair and installation of ventilation systems.
- Kept accurate records of work activities, time, materials and faults on work orders.
- Installed, connected and adjusted thermostats, humidistats and timers for optimal performance.
- Worked on both home and business units for maintenance, repairs, and new installations.
- Analyzed blueprints and manufacturers' design specifications to determine HVAC equipment configuration and complete proper installation.
- Inspected cooling systems and identified potential problems.
- Installed HVAC system expansions, discharge valves, air ducts, dampers, and stokers.
- Repaired and maintained residential and commercial heating, air conditioning and refrigeration systems.
- Supervised and instructed assistants.
- Installed supporting components such as fuel lines and wiring to complete systems.
- Consulted with customers to trace malfunctions and identify root causes, completing speedy repairs to return full performance levels.
HVAC-R Mechanic
Expertech
12.2018 - 08.2020
- Removed old equipment from customers' homes and cleaned up areas to prepare for new installations.
- Assembled air ducts, pipes, discharge valves and flues to central heating and cooling equipment.
- Installed components to improve HVAC system performance.
- Utilized pressure gauges and soap-and-water solutions to test pipe and tubing joints for leaks.
- Increased longevity of HVAC systems by performing preventive maintenance.
- Installed bypass dampers, low voltage wiring, smoke detectors, split systems, and package units in commercial or residential buildings.
- Maintained environmental conditions by rebuilding and replacing faulty components.
- Connected heating or air conditioning equipment to water, fuel, or refrigerant sources to form complete circuits.
- Located and marked pipe positions, hole passages and duct connections in walls and floors.
- Completed thorough inspections of supporting electrical systems to assess continuity and locate faults.
- Consulted with customers to trace malfunctions and identify root causes, completing speedy repairs to return full performance levels.
- Discussed heating and cooling system malfunctions with customers to isolate problems and verify corrected malfunctions.
- Optimized performance by balancing systems and calibrating controls.
- Operated portable metal-working tools or welding equipment to fabricate, assemble, and install ductwork and chassis parts.
- Completed circuits by connecting systems to sources of refrigerant, fuel or water, testing connections for integrity.
- Responded to emergency HVAC service requests promptly, finding swift resolutions.
- Installed new air conditioning, heating and refrigeration systems according to manufacturer's specifications and local codes.
- Used technical skills, tools, and techniques like soldering to repair parts.
- Troubleshot and diagnosed issues with HVAC and refrigeration units.
- Repaired and replaced faulty motors, blowers, switches and compressor units.
- Repaired, replaced and serviced both residential and commercial HVAC equipment, components, and wiring.
- Worked in strict compliance with applicable OSHA regulations and safety requirements.
- Performed routine maintenance on heating and cooling systems.
- Assisted in maintenance, repair and installation of ventilation systems.
- Kept accurate records of work activities, time, materials and faults on work orders.
- Installed, connected and adjusted thermostats, humidistats and timers for optimal performance.
- Worked on both home and business units for maintenance, repairs, and new installations.
- Analyzed blueprints and manufacturers' design specifications to determine HVAC equipment configuration and complete proper installation.
- Inspected cooling systems and identified potential problems.
- Installed HVAC system expansions, discharge valves, air ducts, dampers, and stokers.
- Repaired and maintained residential and commercial heating, air conditioning and refrigeration systems.
- Supervised and instructed assistants.
- Installed supporting components such as fuel lines and wiring to complete systems.
- Tested automatic, programmable, and wireless thermostats in residential or commercial buildings to decrease energy usage 25%
Education
High School Diploma -
Holy Cross College
Trinidad06.2016
Skills
- In-Depth Knowledge of Refrigeration Systems
- Leak Checks
- Defrost Controls
- Control Systems Programming
- Educated on Charging Principles
- Heating Principles Knowledge
- EPA Requirements Knowledge
- Air Properties Expertise
- HVAC Change-Out Procedures Expertise
- Hazardous Materials Training
- Troubleshooting Expertise
- Blueprint Interpretation
Timeline
Hvac-technician
Tanen Contracting
10.2020 - Current
HVAC-R Mechanic
Expertech
12.2018 - 08.2020
High School Diploma -
Holy Cross College
Similar Profiles
SIMAN K VARGHESESIMAN K VARGHESE
Entrepreneur at Skypark Trading Contracting & Services W.L.L. & New Towers Trading & Contracting W.L.L.Entrepreneur at Skypark Trading Contracting & Services W.L.L. & New Towers Trading & Contracting W.L.L.
Khalil WarrenKhalil Warren
Truck Driver at Bryden's Contracting/B&B ContractingTruck Driver at Bryden's Contracting/B&B Contracting
Billy HaintzBilly Haintz
Electrician & Metering at Green Focus Contracting/ Southern Cross ContractingElectrician & Metering at Green Focus Contracting/ Southern Cross Contracting
Scott BackmanScott Backman
Delivery Driver at OntacDelivery Driver at Ontac
Maryam EsheshMaryam Eshesh
Receptionist at Elite AmenitiesReceptionist at Elite Amenities