Joe Nieto

• Professional Summary
• Operated CDL Class A trucks (typically flatbed or lowboy) to transport steel guardrails, posts, and crash barrier components to DOT and highway construction sites.
• Delivered materials to job sites across [region/state], ensuring compliance with weight limits and DOT regulations.
• Worked closely with installation crews to stage and offload materials using forklifts, winches, or manual labor when required.
• Maintained accurate logbooks, daily vehicle inspections (DVIR), and load securement documentation per FMCSA rules.
• Performed pre-trip and post-trip inspections and minor maintenance on vehicle and trailer components.
• Complied with job site safety practices, including PPE usage and hazard awareness when working near active roadways.
• Occasionally assisted in manual labor or equipment setup during guardrail installation.

• CDL Class A • Flatbed Operation
• Load Securement (chains, straps, edge protectors)
• DOT/FMCSA Compliance & ELD Logs
• Material Handling & Offloading
• Roadway Safety & Flagging Coordination
• Guardrail Staging & Crew Support
• Forklift Operation (if certified).
• Job Site Communication (radios, signals)
• Skid Steer
• Front End Loader
• Forklift
• Excavator
• Combo Machine Operator

• Professional Summary
• Operated Class A commercial vehicles hauling aggregate, sand, gravel, asphalt, and other bulk materials using belly dump and end dump trailers.
• Delivered loads to construction sites, plants, and quarries with precise dumping and gate control under varied terrain conditions.
• Conducted pre-trip and post-trip inspections, verified air brakes, tire condition, trailer gates, and hydraulic components for safe operation.
• Maintained accurate delivery logs, tickets, and weight slips in compliance with DOT regulations and company policies.
• Navigated urban job sites and rural roads using safe driving practices, adjusting for weather, slope, and soft ground.
• Communicated with site foremen and dispatchers to coordinate timing and load placement.
• Managed loads up to [25] tons, ensuring correct weight distribution and material containment.

Key Skills:

• Belly dump gate control / timing
• End dump trailer safety (avoiding tip-overs)
• On-site communication (hand signals, radios)
• Material spread techniques and staging
• DOT / FMCSA compliance
• Off-road / job site safety awareness
• Preventive maintenance and defect reporting

• Professional Summary
• Managed daily operations of a high-volume restaurant, supervising a team of [7] front- and back-of-house employees, including servers, cooks, and hosts.
• Ensured excellent customer service and consistently resolved guest issues, maintaining [5}star ratings on platforms like Yelp and Google.
• Oversaw inventory, supply ordering, vendor relations, and scheduling to control costs and reduce waste.
• Trained and onboarded staff, implemented service standards, and enforced health and safety regulations in accordance with local laws.
• Analyzed sales data and labor metrics to increase profitability, resulting in a increase in revenue over months.
• Managed budgeting, payroll, and P&L statements in coordination with corporate or franchise guidelines.
• Led the team through a successful health inspection with a perfect score.

• Professional Summary
• Founded and operated a successful independent logistics company providing freight transport, dispatching, and customer coordination across regional and national routes.
• Maintained active CDL Class A status, operating flatbed and dry van trucks for time-sensitive and specialty loads, including government and contract freight.eight.
• Managed all aspects of business operations, including route planning, load board sourcing (DAT, TruckStop), invoicing, fuel management, and DOT compliance.
• Handled full dispatching cycle: negotiated freight rates, booked loads, managed driver schedules, and communicated with brokers and shippers.
• Ensured strict adherence to FMCSA regulations, maintained accurate logs (ELD systems), and passed safety audits with no violations.
• Built strong working relationships with brokers, customers, and carriers, resulting in repeat contracts and 5-star service ratings.
• Oversaw preventive maintenance, inspection scheduling, and equipment tracking for fleet reliability.

Key Accomplishments:

• Achieved a 98% on-time delivery rate across over shipments.
• Grew the business to handle 120 loads per month with zero DOT violations.
• Secured [local and OTR] transport contracts with [names if public].

Hardworking and safety-driven CDL A Flatbed Driver with 4 years of experience hauling oversized, heavy, and irregular loads across local and regional routes. Skilled in load securement, strapping, chaining, and tarping to meet DOT safety standards. Committed to on-time delivery and exceptional equipment care. Clean driving record, excellent trip planning, and strong customer communication.

• Key Skills
• CDL Class A – Flatbed Hauling
• Load Securement (Chains, Straps, Binders)
• Tarping & Weather Protection
• Oversized & Wide Load Compliance
• DOT / FMCSA Regulations
• Trip Planning & Route Navigation
• ELD Compliance (Omnitracs, KeepTruckin, etc.)
• Forklift & Crane Assist Coordination
• Pre/Post Trip Inspections
• Lumber, Steel, Pipe, and Machinery Transport

• Professional Summary

Experienced and safety-conscious CDL Class A Reefer Driver with over [X] years of experience transporting perishable freight across regional and long-haul routes. Proficient in temperature monitoring, ELD log management, and pre-trip inspections. Maintains a clean driving record, and consistently delivers freight on time, and in compliance with DOT and food safety regulations.

• Key Skills
• CDL Class A with Clean MVR
• Reefer Trailer Operation
• Temperature Control Monitoring
• Trip Planning & Route Optimization
• Load Securement (Pallet, Floor Load)
• Pre-Trip/Post-Trip Inspections
• FMCSA / DOT Compliance
• ELD Systems (KeepTruckin, Omnitracs, etc.)
• On-Time Delivery Track Record
• Excellent Communication & Customer Service

• Professional Summary

Delivered outstanding performance as a dependable CDL driver with 2 years in local, regional, and OTR transport.
Consistently met on-time delivery targets while upholding strict DOT compliance.
Expertly operated multiple vehicle types including forklifts and various truck configurations.
Emphasized vehicle upkeep and route optimization to maximize efficiency and customer satisfaction.

• Key Skills
• CDL Class A with clean MVR
• Local, regional, and OTR routes.
• Reefer Trailer Operation
• Dry van operation
• Flat bed operation
• Trip Planning and Routing.
• DOT Compliance & Logs (ELDs)
• Cargo Securement & Safety
• Pre/Post-Trip Inspections
• Forklift Operation
• Load/Unload & Liftgate Operation
• Excellent Customer Service

• Professional Summary

Dependable and safety-conscious CDL driver with [X] years of experience in local, regional, and/or OTR (Over-The-Road) hauling. Proven track record of on-time deliveries, DOT compliance, and maintaining clean driving records. Skilled in operating tractor-trailers, flatbeds, box trucks, and forklifts. Committed to customer satisfaction, vehicle maintenance, and efficient route management.

• Key Skills
• CDL Class A with clean MVR
• Local, Regional, OTR Routes
• Trip Planning & Routing
• DOT Compliance & Logs (ELDs)
• Cargo Securement & Safety
• Pre/Post-Trip Inspections
• Load/Unload & Liftgate Operation
• Excellent Customer Service
• Operate 53’ refer across [OTR] for scheduled deliveries, averaging [3,000] miles/week.
• Perform pre-trip and post-trip inspections, maintaining DOT compliance.
• Safely load and unload freight using pallet jack and liftgate.
• Maintain accurate electronic logs using
• Interact with dispatch and customers to resolve delivery issues professionally.

• Ensured compliance with government regulations for storage, handling, packaging, labeling, shipping and receiving processes.
• Core Competencies
• Inventory Management
• Forklift Operation (certified?)
• Shipping/Receiving (FedEx, UPS, DHL)
• Order Picking & Packing
• Cycle Counts & Audits
• Bill of Lading (BOL) Preparation
• Warehouse Safety Standards
• Logistics Coordination
• RF Scanners & Labeling Systems
• Microsoft Excel / WMS Systems

Professional Experience

• Operate forklifts and pallet jacks to load/unload freight safely and efficiently.
• Maintain warehouse cleanliness and compliance with OSHA safety standards.
• Prepare packing slips, shipping labels, and bills of lading (BOLs).