Highly experienced and motivated Avionics and Electronics Technician with E6, KC135 , C-130, S3B, C-9, C-5, 747, 737, F-15, and F-18 experience.
Overview
25
25
years of professional experience
Work History
Avionics Technician
Strom Aviation/ A.A.R.
OKLAHOMA CITY, OK
2022.01 - 2022.09
Performed Avionics checks and repairs during Heavy maintenance.
Repaired and installed wiring, connectors, control boxes antennas and other pieces.
Avionics Technician
Field Aerospace
Oklahoma City, OK
2011.09 - 2021.09
Participated in modifications of Navy E6b aircraft in secure environment
Charged with installing and terminating wire aircraft wiring
Removed equipment at onset of mod, and reinstalled upon completion
Performed continuity checks and operational testing
Performed some light maintenance
Also performed Avionics modifications on KC135 and KC10 platforms
Avionics Installer
PDS Technical Services/ The Boeing Company
North Charleston, SC
2011.02 - 2011.07
Installed aircraft wiring and equipment in 787 Dreamliner aircraft in lean environment
Installed and routed electrical cable assemblies and performed termination processes and continuity checks.
Field Service Engineer
Rockwell Collins
Helwan A.F.B, Arab Republic Of Egypt
2006.04 - 2010.10
Performed TAUP modifications on Egyptian C-130 aircraft in a multicultural environment
Worked with and instructed Egyptian Air Force personnel in interpretation of drawings and use of crimping tools to install and terminate wiring
Performed operational testing, aligned Inertial Navigation system and swung the compass
Involved in the installation and modification of fixed sight HF RADIO STATIONS at Richardson, TX.
Performed onsite installation, modification and maintenance of systems and equipment.
Avionics Technician
PDS Technical Services, The Boeing Company
San Antonio, TX
2005.01 - 2006.02
Terminated wiring at RJ1 rack and main circuit breaker panel on KC135 GATM modification
Ran DITMCO machine to check continuity on all systems
Involved with Lean Activities and was tow team member and 5s Focal.
AVIONICS TECHNICIAN
PDS Technical Services, Northrup Grumman
St. Augustine, FL
2004.02 - 2005.04
Performed ICAP III modification of EA-6B Prowler aircraft and wire installation of E-2C Hawkeye aircraft.
Repaired and installed wiring, connectors, control boxes antennas and other pieces.
Avionics Technician
PDS Technical, Boeing Aerospace Operations
Al Jabar Air Force Base, Kuwait
2003.05 - 2004.02
Performed MUX 3 and Night Lighting Modifications on Kuwaiti Air Force F/A 18 aircraft
Performed power-on checks; troubleshot problems and repaired all disturbed Avionics Systems.
Repaired and installed wiring, connectors, control boxes antennas and other pieces.
Avionics Technician
PDS Technical/ Boeing Aerospace Operations
Jacksonville, FL
2003.03 - 2003.05
Performed installation, operational checks, and troubleshooting of communications upgrade on S-3B Viking aircraft.
Repaired and installed wiring, connectors, control boxes antennas and other pieces.
Avionics Technician
PDS Technical/ Boeing Aerospace Operations
Al Jabar Air Force Base, KUWAIT
2002.09 - 2003.02
(Same position listed previously: halted due to 2nd Gulf War)
Avionics Technician
The Aviant Group/ Boeing Aerospace Operations
China Lake Naval Weapons Center, Ridgecrest, CA
2002.06 - 2002.09
Worked as Lead Technician On Canadian F=18A+ Validate And Verify modification.
Tested electrical aircraft systems, components and equipment for compliance with standards and to uncover any malfunctions.
Worked closely with Canadian Air Force Personnel,
Aviation Researcher
Weldon Garrelts / Aviation Accident Investigator
PHILO, IL
2001.12 - 2002.05
Performed research (I.E) AD notes, CFR'S, and Federal Air Regulations for aircraft accident investigations.
AVIONICS TECHNICIAN
Lockheed Martin Aircraft Center
GREENVILLE, SC
1999.11 - 2001.11
Involved in the installation, testing, and troubleshooting of, GPS, TCAS, EGPWS, and FMS in Navy and Air Force C-9 aircraft
Performed power-on testing and PDM work.
Avionics Technician
General Technology Co./ Boeing Aerospace Ops.
RIDGECREST, CA
1999.06 - 1999.10
Involved in JHMCS installation on F/A-18C aircraft
Worked closely with planning and engineering to solve initial startup problems
Trained personnel in correct wire routing and termination procedures.
Avionics Technician
Lockheed Martin Logistics Center
TRAVIS AFB, FAIRFIELD, CA.
1999.02 - 1999.06
Performed installation and terminations of wiring for C-5 GPS modification
Performed Power-on checks and troubleshot disturbed systems.
Factory Manufacturing Engineer
PDS/ Boeing Commercial Aircraft Group
Everett, WA
1996.03 - 1998.12
Worked in lean manufacturing environment with Mechanics, Supervisors, Quality Assurance, and Engineering to create and revise work instructions in Final Body Join and J&I areas of 747 production plant
Solved various manufacturing and parts problems by investigating assembly and installation documentation
Coordinated aircraft configuration changes with engineering and project planning groups.
Education
Associate of Science - Avionics
University of Illinois/ Institute of Aviation
Urbana/ Champaign Illinois
Skills
Proficient in the Installation and termination of Aircraft wiring using a wide variety of crimping tools.
Operational testing and troubleshooting experience with various Aircraft systems including GPS,TCAS, EGPWS, AUTOPILOT, FMS, VHS NAV, VHF COM and others
Understanding of Schematics, Prints, and Drawings
Manufacturing Engineering (Planning) experience using several computer programs to solve manufacturing issues
Additional Information
Maintained DOD (Secret) clearances
FCC Licensed
Worked in multicultural environments such as Spain, Kuwait, and Egypt
Received Letters of Accomodation and rewards
Timeline
Avionics Technician
Strom Aviation/ A.A.R.
2022.01 - 2022.09
Avionics Technician
Field Aerospace
2011.09 - 2021.09
Avionics Installer
PDS Technical Services/ The Boeing Company
2011.02 - 2011.07
Field Service Engineer
Rockwell Collins
2006.04 - 2010.10
Avionics Technician
PDS Technical Services, The Boeing Company
2005.01 - 2006.02
AVIONICS TECHNICIAN
PDS Technical Services, Northrup Grumman
2004.02 - 2005.04
Avionics Technician
PDS Technical, Boeing Aerospace Operations
2003.05 - 2004.02
Avionics Technician
PDS Technical/ Boeing Aerospace Operations
2003.03 - 2003.05
Avionics Technician
PDS Technical/ Boeing Aerospace Operations
2002.09 - 2003.02
Avionics Technician
The Aviant Group/ Boeing Aerospace Operations
2002.06 - 2002.09
Aviation Researcher
Weldon Garrelts / Aviation Accident Investigator
2001.12 - 2002.05
AVIONICS TECHNICIAN
Lockheed Martin Aircraft Center
1999.11 - 2001.11
Avionics Technician
General Technology Co./ Boeing Aerospace Ops.
1999.06 - 1999.10
Avionics Technician
Lockheed Martin Logistics Center
1999.02 - 1999.06
Factory Manufacturing Engineer
PDS/ Boeing Commercial Aircraft Group
1996.03 - 1998.12
Associate of Science - Avionics
University of Illinois/ Institute of Aviation
Similar Profiles
Mason TranMason Tran
Sheet Metal Structure Mechanic at Spirit AeroSystems " Strom AviationSheet Metal Structure Mechanic at Spirit AeroSystems " Strom Aviation