Joshua Langelier
Lizella,GA
Summary
Young diligent worker willing to learn more. I pick things up quick with hands on training and already have a good couple of years under my belt for my age. I started when I was young with plumbing but my grandfather was a pipefitter and raised me so naturally I want to pursue that or any other kind of metal work. thank you for taking the time to read this And I look forward to us hopefully speaking soon.
Overview
4
4
years of professional experience
Work History
Pipefitter
Pyles Plumbing And Utility
Macon, GA
05.2023 - 08.2024
- Installed automated controls to regulate pressure and volume in pipe systems.
- Verified and gathered measurements to determine proper piping sizes.
- Shut off steam or other gases or liquids from pipes to conduct maintenance.
- Inspect work areas to ensure that they are clean and free from obstructions.
- Read and interpreted specifications, diagrams and blueprints for job.
- Modified piping systems with task-specific tools to complete preventive maintenance.
- Repair or replace worn parts such as seals and bearings on pumps and valves.
- Adjust flow rates within specified limits by changing valve positions or altering lengths of pipe sections.
- Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
- Test plumbing systems for leaks using air pressure gauges or other testing devices.
- Performed rigging and forklift operations to maneuver parts and machinery.
- Fabricate parts out of metal sheeting when required.
- Fabricated and positioned screw pipe, socket weld pipe, and stainless steel tubing.
- Tested plumbing systems for leaks using air and water pressure gauges.
- Cut or threaded pipes to blueprint or drawing specifications.
- Keep up-to-date with new technologies related to pipefitting industry.
- Measure, cut, thread, groove, bend and install piping according to specifications.
- Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
- Install supports for pipes to keep them in place during installation process.
- Collaborate with other tradespeople such as electricians or plumbers when necessary.
- Used valve keys and wrenches to turn valves and shut off water from pipe sections.
- Measured and marked pipes for cutting and threading.
- Cut openings in walls and floors to accommodate pipe and pipe fittings.
- Troubleshoot malfunctioning systems by diagnosing issues with components such as valves or pumps.
- Installed supports from ceiling joists to secure pipes in place.
- Threaded and installed pipe using pipe wrench and dies.
- Used welding and soldering equipment to join sheet metal components following blueprints and job specifications.
- Cut diverse pipe sizes and lengths to prepare for installation.
- Threaded pipes using specified machinery.
- Assemble and secure pipes by welding joints or using cement or solder.
- Drilled and tapped holes for installation of studs.
- Filled piping systems with water and air to test for leaks.
- Established sequence of installations around obstructions.
- Observed safe work rules and utilized fall protection and PPE.
- Completed day-to-day duties accurately and efficiently.
- Operated a variety of machinery and tools safely and efficiently.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Maintained updated knowledge through continuing education and advanced training.
- Worked with cross-functional teams to achieve goals.
Lead Installer
Ricky Heath Plumbing
Macon, GA
09.2020 - 03.2023
- Completed scheduled appointments on time to drive quality service.
- Surveyed job sites to identify positions and locations for equipment.
- Analyzed project requirements to determine the best approach for successful implementation of new systems or services.
- Resolved conflicts between team members professionally while maintaining a positive work environment.
- Performed system upgrades and maintenance including patching, troubleshooting, and resolving hardware and software issues.
- Inspected installed systems using hydrostatic testing or pressure gauges.
- Modified piping systems with task-specific tools to complete preventive maintenance.
- Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
- Tested plumbing systems for leaks using air and water pressure gauges.
- Followed relevant codes, regulations, and safety techniques.
- Cut and fit pipes to established measurements.
- Prepared project bids and gathered parts, labor and equipment needed for projects.
- Inspected drainage and sewer lines to detect blockages or leaks using video cameras.
- Assisted with troubleshooting and used alternative methods in emergency situations.
- Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
- Diagnosed problems with plumbing systems by listening for leaks; inspecting exposed pipes; testing pressure gauges; running diagnostic tests.
- Shut off steam or other gases or liquids from pipes to conduct maintenance.
- Cut openings in structures to accommodate pipes or pipe fittings using power saws or hand tools.
- Cut or threaded pipes to blueprint or drawing specifications.
- Installed and extended underground storm, sanitation, and water piping systems to connect fixtures and plumbing.
- Installed supports from ceiling joists to secure pipes in place.
- Observed safety precautions while working with hazardous chemicals.
- Inspected worksites to determine presence of obstructions, unsafe conditions and crew errors.
- Installed automated controls to regulate pressure and volume in pipe systems.
- Determined the location of existing underground utilities prior to excavation work.
- Maintained tools and equipment to keep supplies in excellent working condition.
- Fabricated and assembled pipe sections for steam and hot-water heating systems.
- Cut diverse pipe sizes and lengths to prepare for installation.
- Filled piping systems with water and air to test for leaks.
- Cut openings in walls and floors to accommodate pipe and pipe fittings.
- Connected pipes to gas meters, regulators, and appliances such as stoves and water heaters according to local codes.
- Communicated with customers regarding recommendations on repairs, replacements and upgrades of plumbing equipment.
- Verified and gathered measurements to determine proper piping sizes.
- Performed maintenance on plumbing fixtures such as sinks, toilets, bathtubs and showers, disposals, dishwashers.
- Assembled and installed metal and nonmetal valves, pipe fittings and pipes.
- Assembled valves and hangers for new installations and repaired existing ones.
- Participated in regular training sessions to stay up-to-date on industry changes.
- Replaced broken drain lines using appropriate materials such as copper tubing or PVC piping.
- Located and repaired leaks in water supply lines.
- Repaired or replaced worn parts such as washers, gaskets, and seals in plumbing system components.
- Tested pipe systems for proper functioning after installation or repair.
- Used power tools to create assemblies and sub-assemblies.
- Installed backflow preventers in accordance with state regulations.
- Installed and maintained water supply systems, including pumps, valves, piping, tanks, fixtures, and other related equipment.
- Tested piping systems with water and air pressure to maintain balance and accuracy.
- Identified and located required tools prior to starting each project.
- Established sequence of installations around obstructions.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Worked with cross-functional teams to achieve goals.
- Operated a variety of machinery and tools safely and efficiently.
- Collaborated closely with team members to achieve project objectives and meet deadlines.
Skills
- Piping diagram interpretation
- Hand and power tools
- Hydraulic systems
- Pneumatic systems
- Material cutting
- Pipe insulation
- Soldering copper pipes
- Piping layout
- Pipe measuring
- Commercial construction experience
- Blueprints and specifications
- Pipe cutting
- Pneumatic and hydraulic equipment
- Threaded pipe fabrication
- Brazing joints
- Industrial piping
- Piping installations
- Grooved pipe installation
- Pipe hanger installation
- Leak detection
- Pressure testing
- Steam piping
- Welding
- Cutting and threading
- Plumbing
- Construction installations
- Pipe threading
- Plumbing codes
- Pipe welding
- Valve installation
- Pipefitting
- OSHA rules and regulations
- Pipe fabrication
Timeline
Pipefitter
Pyles Plumbing And Utility
05.2023 - 08.2024
Lead Installer
Ricky Heath Plumbing
09.2020 - 03.2023