Josue Guillen
Donna,TX
Overview
2
2
years of professional experience
1
1
Certification
Work History
I&E Technician
Contech Control Services
09.2024 - 12.2024
- Shoot loops and trouble shoot from the different types of instruments and valves to either programmers or operators, depending on the loop drawings.
- Calibrate, pump up, drive signals and pressurize instruments such as pressure differential transmitters to temperature transmitters. Valves such as shut down valves, pressure valves, and even hand valves were calibrated as well.
- Walk down instruments by using p&id’s and location drawings.
- Install or rewire instruments valves and solenoids that were installed incorrectly.
I&E Technician
Turn2 Specialty Company
07.2024 - 09.2024
- Demolition of some existing instrumentation, and repair of flex where deemed necessary.
- Commissioning of all new instrumentation installed per turnaround.
- Assisted with minor tasks alongside maintenance personnel involved with turnaround scope
- Directed and trained junior techs in proper calibrations and loop checks in new and existing instrumentation and troubleshooting in rio cabinets.
I&e inspector
Rush Resources
04.2024 - 07.2024
- Supervised proper loop checks completed by other personnel.
- Performed calibrations of capillary flow transmitters and level transmitters along with many other basic transmitters.
- Function tested combuster skid and shutdown system operation.
- Troubleshooting of BMS panels and improperly functioning loops.
- Worked alongside compressor vendors to complete setup and commission of new compressor skids.
- Completed all spreadsheet and paperwork required from me by the plant personnel.
- Maintained a clear form of communication with client regarding any needs they may have
Instrumentation Technician
Advanced instrumentation services
04.2024 - 04.2024
- Performed loop checks and troubleshooting of existing instrumentation involved in turnaround.
- Worked closely with instrumentation turnaround planner to create instrument folders involving loop sheets, p&id, and calibration sheets.
- Replaced and recalibrated instrumentation when troubleshooting was complete and decision was made for course of action pertaining to instrument.
- Replaced flex conduit and mounting hardware where deemed applicable.
Instrument Technician
Advanced Instrumentation Services
12.2023 - 03.2024
- Performed inspections and loop checks per p&id as part of new construction commissioning.
- Conducted troubleshooting procedures and root cause analysis to determine causes of problems.
- Modified, maintained or repaired electronics equipment or systems to achieve maximum efficiency.
- Stayed for start up support and made minor adjustments and repairs for seamless operation.
- Directed junior techs in day to day tasks and assisted with problem solving and troubleshooting.
Instrument Technician
Advanced instrumentation services
11.2023 - 12.2023
- Terminate wires while following schematic diagrams.
- Performed loop checks as per p&id and confirmed flow directions and locations of instrumentation along with conduit associated with instruments.
- Tested, troubleshot and calibrated equipment in shop and field as per calibration sheets provided.
- Performed all commissioning of instrumentation and trouble shooting to ensure a seamless startup and operation process.
Instrumentation Technician
Advanced instrumentation services
11.2023 - 11.2023
- Performed loop checks, calibrations, and troubleshooting on over 60 rosemount guided wave radar transmitters.
- Read p&id and ensured the correct instrumentation was installed in the correct location.Is.
- Consulted with Emerson representative on issues that could not be confirmed by field analysis alone.
Instrument Technician
Advanced instrumentation services
09.2023 - 11.2023
- Loop checks using loop drawings.
- Walked down instruments using location drawings and P&ID’s
- SIS and BIS checkout
- Pump up transmitters and drive signals using a fluke 789, 725, crystal, and 475 communicator.
- R&R instrumentation elements and transmitters.
- Performed startup support after turnaround was successfully completed.
- Performed rebuilds and bench calibrations of existing and new pneumatic and 4-20ma signal transmitters
Instrument Technician
Wood
05.2023 - 06.2023
- Operated multimeters, Equipment and other electronic testing devices to accurately diagnose equipment issues.
- Wrote detailed service reports and maintained organized records of service actions.
- Studied and interpreted equipment manuals, circuit diagrams, blueprints and schematics to determine corrective actions for repairs, calibrations and installations.
Instrument Technician
Rush Resources
02.2023 - 03.2023
- Terminate wires while following schematic diagrams.
- Tested wiring and other system parts for electrical flow and function.
- Installed, repaired and tested System electrical and electronic systems.
Instrumentation Technician
AIS
11.2022 - 01.2023
- Studied and interpreted equipment manuals, circuit diagrams, blueprints and schematics to determine corrective actions for repairs, calibrations and installations.
- Liaised with engineering staff on special projects to assist with configuration, installation and interoperation of system equipment.
- Performed scheduled and planned installation and maintenance duties.
- Performed repair procedures on damaged instruments and sourced replacements from approved vendors.
- Wrote detailed service reports and maintained organized records of service actions.
Education
Highs School -
IDEA College Prep
Donna, TX05.2007
Skills
- Electrical Experience
- English
- Low Voltage
- Writing skills
- Construction
- Spanish
- Maintenance
- Calibration
- Schematics
- Programmable Logic Controllers
- Blueprint Reading
Certification
- NCCER Certification #26410419
- TWIC Card
- OSHA-30
Timeline
I&E Technician
Contech Control Services
09.2024 - 12.2024
I&E Technician
Turn2 Specialty Company
07.2024 - 09.2024
I&e inspector
Rush Resources
04.2024 - 07.2024
Instrumentation Technician
Advanced instrumentation services
04.2024 - 04.2024
Instrument Technician
Advanced Instrumentation Services
12.2023 - 03.2024
Instrument Technician
Advanced instrumentation services
11.2023 - 12.2023
Instrumentation Technician
Advanced instrumentation services
11.2023 - 11.2023
Instrument Technician
Advanced instrumentation services
09.2023 - 11.2023
Instrument Technician
Wood
05.2023 - 06.2023
Instrument Technician
Rush Resources
02.2023 - 03.2023
Instrumentation Technician
AIS
11.2022 - 01.2023
Highs School -
IDEA College Prep
Similar Profiles
Kenni HernandezKenni Hernandez
Electrician at Contech Control ServicesElectrician at Contech Control Services
Cameron MartinezCameron Martinez
I/E Helper at Contech Control ServicesI/E Helper at Contech Control Services
Gustavo Faustino AngelesGustavo Faustino Angeles
Apprentice Electrician at Contech Control Services, LLC.Apprentice Electrician at Contech Control Services, LLC.
Yolanda GonzalezYolanda Gonzalez
Medical Office Specialist at Michael A. Flores M.D. P.A.Medical Office Specialist at Michael A. Flores M.D. P.A.
Melchor ValdezMelchor Valdez
Field Technician at CharterField Technician at Charter