Michael A Wilde
Parkers Prairie,MN
Summary
Hardworking Electrician driven to complete projects with focus on safety, cost-efficiency and client satisfaction. Versed in residential and commercial installations and repairs. Offering 34 years of industry expertise, including building codes, blueprint assessments and new construction protocols.
Overview
34
34
years of professional experience
1
1
Certification
Work History
Journeyman Electrician
Berd Electric
Sauk Rapids, MN
12.2010 - Current
- Instructed apprentices on proper installation techniques for various electrical components.
- Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
- Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
- Corrected issues and installed new fixtures, wiring, circuits and motors.
- Dug trenches and created holes to pull conduit and install supports.
- Installed conduit systems, various lighting systems, and basic control systems.
- Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
- Reviewed blueprints to determine electrical component and wiring locations.
- Identified system malfunctions and performed repairs as needed.
- Tested continuity of circuits using testing devices such as ohmmeters, voltmeters, ammeters.
- Inspected completed installations for conformance to codes and regulations.
- Connected wires to circuit breakers, transformers or other components to form circuits.
- Planned layout and installation of wiring and fixtures based on project specifications and building codes.
- Assembled and installed physical structures, electrical wiring and electronic components up to 480 volts
- Constructed and installed electrical wiring and electronic components and maintained equipment.
- Performed maintenance on existing electrical wiring and equipment.
- Installed electrical systems in residential and commercial buildings according to plans and specifications.
- Installed leads and connected cables to motors, apparatus and equipment.
- Pulled insulated wires or cables through conduits to complete circuits.
- Kept work areas clean, neat and free of hazards.
- Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
- Installed and maintained breaker panels for commercial and residential buildings.
- Traced and diagnosed electrical malfunctions using hand tools and test equipment.
- Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
- Replaced faulty switches, outlets, circuit breakers when necessary.
- Worked with contractors regarding project timelines and budgets.
- Trained workers to install, maintain and repair electrical equipment and fixtures.
- Updated outdated wiring systems with newer technologies.
- Diagnosed malfunctioning wiring using test equipment to locate faults.
- Performed rough-in, termination, and underground work.
- Planned new installations by studying drawings, technical manuals, and other documents.
- Addressed and resolved worksite safety hazards to reduce risk.
- Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
- Assisted journeyman electricians in troubleshooting complex problems.
- Read blueprints or schematic diagrams to determine the layout of a particular job site.
- Adhered to local building codes when installing new electrical systems.
- Followed established safety practices when using tools and equipment.
- Provided excellent service and attention to customers when face-to-face or through phone conversations.
- Planned and completed group projects, working smoothly with others.
- Delivered products to customer locations on time.
- Displayed strong telephone etiquette, effectively handling difficult calls.
- Maintained open communication with team members and stakeholders, resulting in successful project outcomes.
- Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
- Understood and followed oral and written directions.
- Identified needs of customers promptly and efficiently.
Small Arms Repair Technician
CSMS Camp Ripley
Little Falls, MN
09.2008 - 11.2010
- Developed creative visual merchandising campaigns to focus on selling older inventory.sma
- Supervised operation and organizational maintenance of weapons systems and specialized equipment.
- Ordered replacement parts from suppliers as needed.
- Followed safety guidelines and wore protective gear when using power drills, circular saws, and other power tools.
- Repaired weapons according to manufacturer's specifications using schematics, diagrams, technical manuals, blueprints, and other written instructions.
- Cleaned weapons systems with solvents and lubricants.
- Ran tests on newly repaired machinery and equipment to confirm proper functionality.
- Calibrated equipment used in the repair process according to manufacturer's instructions.
- Identified problems with ammunition feeding devices through testing processes.
- Assembled firearm components after completion of repairs utilizing specialized tools and fixtures.
- Routinely inspected equipment for preventive and emergency maintenance needs.
- Followed established safety guidelines when handling hazardous materials.
- Greased mechanical parts with lubrication to achieve smooth and regular functionality.
- Filled out work orders, repair logs and maintenance plans to document work completed.
- Provided technical assistance to customers regarding maintenance issues with their firearms.
- Troubleshot malfunctions and diagnosed issues to service equipment quickly and fully.
- Read and interpreted technical manuals, drawings and schematics to make accurate repair decisions.
- Performed detailed inspections of small arms and related components to identify malfunctions or defective parts.
- Operated machinery safely during the disassembly and reassembly process.
- Took measurements and evaluated dimensions of surrounding area to correctly install new machinery.
- Updated inventory logs with completed repairs and newly acquired parts.
- Consulted blueprints and manufacturer manuals to plan appropriate and effective repair work.
- Tested repaired items for proper functioning and accuracy.
- Maintained records of repairs and inspections, including serial numbers, test results, and parts used in the repair process.
- Maintained quality control by inspecting products and correcting deficiencies.
- Disassembled small arms assemblies for repair purposes.
- Adjusted mechanisms to improve performance according to manufacturers' requirements.
- Diagnosed mechanical failures by examining components for defects such as wear or corrosion.
- Coordinated repair and maintenance plans with co-workers and supervisors ahead of scheduled projects.
- Installed new components or replaced defective parts to restore functionality.
- Replaced worn or damaged parts, using hand tools and precision measuring instruments.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Understood and followed oral and written directions.
Journeyman Electrician
Parkers Electric
Parkers Prairie, MN
02.1990 - 09.2008
- Provided emergency services during outages or natural disasters.
- Performed troubleshooting and diagnosis on malfunctioning systems or components.
- Verified measurements and made accurate cuts to avoid wasting materials on job sites.
- Trained workers to install, maintain and repair electrical equipment and fixtures.
- Reviewed blueprints to determine electrical component and wiring locations.
- Read blueprints or schematic diagrams to determine the layout of a particular job site.
- Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
- Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
- Reviewed existing electrical systems for maintenance, repair and update requirements.
- Maintained records of work performed for future reference purposes.
- Advised management on issues of safety in continued equipment operation.
- Traced and diagnosed electrical malfunctions using hand tools and test equipment.
- Collaborated with architects on electrical systems design for new construction.
- Diagnosed malfunctioning wiring using test equipment to locate faults.
- Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
- Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
- Completed semi-skilled and skilled work under supervision of fully qualified professionals.
- Dug trenches and created holes to pull conduit and install supports.
- Updated outdated wiring systems with newer technologies.
- Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
- Installed conduit systems, various lighting systems, and basic control systems.
- Assisted with new installation and upgrades of plant equipment.480
- Assembled and installed physical structures, electrical wiring and electronic components up to 480 volts.
- Connected wires to circuit breakers, transformers or other components to form circuits.
- Performed maintenance on existing electrical wiring and equipment.
- Worked with contractors regarding project timelines and budgets.
- Constructed and installed electrical wiring and electronic components and maintained equipment.
- Reviewed diagrams and relevant codes to complete tasks safely and accurately.
- Replaced malfunctioning components for failing electrical setups.
- Planned layout and installation of wiring and fixtures based on project specifications and building codes.
- Ensured all safety procedures were followed while working with live wires.
- Performed rough-in, termination, and underground work.
- Instructed apprentices on proper installation techniques for various electrical components.
- Kept work areas clean, neat and free of hazards.
- Identified system malfunctions and performed repairs as needed.
- Pulled insulated wires or cables through conduits to complete circuits.
- Followed established safety practices when using tools and equipment.
- Led team of apprentice electricians in installing electrical systems and inspecting existing circuits.
- Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
- Tested continuity of circuits using testing devices such as ohmmeters, voltmeters, ammeters.
- Replaced faulty switches, outlets, circuit breakers when necessary.
- Assisted journeyman electricians in troubleshooting complex problems.
- Corrected issues and installed new fixtures, wiring, circuits and motors.
- Inspected completed installations for conformance to codes and regulations.
- Installed motor feeders and made standard motor connections.
- Adhered to local building codes when installing new electrical systems.
- Displayed strong telephone etiquette, effectively handling difficult calls.
- Installed leads and connected cables to motors, apparatus and equipment.
- Maintained updated knowledge through continuing education and advanced training.
- Understood and followed oral and written directions.
- Prioritized and organized tasks to efficiently accomplish service goals.
- Identified needs of customers promptly and efficiently.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
Education
High School Diploma -
Superior Jr/Sr High School
Superior, NE05-1985
Skills
- Blueprint Reading
- Equipment Troubleshooting
- Preventive Maintenance
- Schematics Interpretation
- Electrical Repair
Certification
- Iowa Journeyman License
- Montana Journeyman License
- North Dakota Journeyman License
- South Dakota Journeyman License
- Minnesota Journeyman License
Affiliations
Member of the American Legion Post 219
Member of Veterans of Foreign Wars Post 936
Retired volunteer firefighter Parkers Prairie MN Fire Department.
References
References available upon request.
Timeline
Journeyman Electrician
Berd Electric
12.2010 - Current
Small Arms Repair Technician
CSMS Camp Ripley
09.2008 - 11.2010
Journeyman Electrician
Parkers Electric
02.1990 - 09.2008
High School Diploma -
Superior Jr/Sr High School
Similar Profiles
Daniel BeldenDaniel Belden
Electrical Apprentice at Berd ElectricElectrical Apprentice at Berd Electric
Jonathan FreundJonathan Freund
Journeyman Electrician at Berd ElectricJourneyman Electrician at Berd Electric
Anthony DomicoAnthony Domico
Low Voltage Technician at Berd ElectricLow Voltage Technician at Berd Electric