Mitchell Phelps

Similar Profiles

• Rohit RathorRohit Rathor

  <ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group<ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group

• Tanvir SinghTanvir Singh

  Working in a BC tire workshop specialized in changing tires. at NAWorking in a BC tire workshop specialized in changing tires. at NA

• TODD FILIPKOWSKITODD FILIPKOWSKI

  <ul> <li>Responsible for processing incoming payments, ensuring accuracy, and maintaining confidentiality of current and past federal income tax returns to the IRS in a timely manner.</li> <li>Preparing work for digitization by extracting payments and documents from U.S citizens.</li> <li>Inputting and validating data into the system while following standard operating procedures and customer specific instructions for processing</li> <li>Operating high-volume document scanning machines while validating quality of scanned images</li> <li>Validating and reconciling electronic records to paper documentation</li> <li>Ensuring that all customer and bank guidelines are followed as related to operations, internal audit and security and general policies</li> </ul> at J.P. Morgan Chase Bank Lockbox<ul> <li>Responsible for processing incoming payments, ensuring accuracy, and maintaining confidentiality of current and past federal income tax returns to the IRS in a timely manner.</li> <li>Preparing work for digitization by extracting payments and documents from U.S citizens.</li> <li>Inputting and validating data into the system while following standard operating procedures and customer specific instructions for processing</li> <li>Operating high-volume document scanning machines while validating quality of scanned images</li> <li>Validating and reconciling electronic records to paper documentation</li> <li>Ensuring that all customer and bank guidelines are followed as related to operations, internal audit and security and general policies</li> </ul> at J.P. Morgan Chase Bank Lockbox

• Igor Carminatti DavidIgor Carminatti David

  <ul><li>Developed and executed projects. Understood the full project life cycle from concept through to qualification.</li><li>Provided technical support to B2B and B2C clients monthly.</li><li>Supported the engineering requirements through managing & liaising with key project stakeholders (client design team, main contractor, suppliers, sub-contractors, etc.).</li><li>Assisted in the execution of projects & provided guidance to ensure compliance to all relevant standards/codes and specifications associated; including all site activities associated with validation and handover to the operations team.</li><li>Ensured works are installed in accordance with project specifications and change control procedures.</li><li>Produced drawings and specifications for upgrades and new build designs.</li><li>Managed the full sales cycle of solar energy products for new residential clients</li><li>Monitored daily project execution and evaluated project progress, contract compliance.</li><li>Wiring low and medium voltage control panels.</li><li>Understand of Schematic Drawings (REVIT/ Auto-Cad)</li><li>Manufacturing and Assembly (Control Panels)</li><li>Assisting in test of Control Panels and Assemblies</li><li>Continuous improvement Initiatives</li><li>- Lean Manufacturing</li><li>- Compliance with Industry Quality Standards</li><li>SPDA Project - Lightning Protection System.</li><li>Electrical Substation Project;</li><li>Solar Projects;</li><li>Reasons for leaving: Move to Ireland.</li></ul> at Nova Engenharia<ul><li>Developed and executed projects. Understood the full project life cycle from concept through to qualification.</li><li>Provided technical support to B2B and B2C clients monthly.</li><li>Supported the engineering requirements through managing & liaising with key project stakeholders (client design team, main contractor, suppliers, sub-contractors, etc.).</li><li>Assisted in the execution of projects & provided guidance to ensure compliance to all relevant standards/codes and specifications associated; including all site activities associated with validation and handover to the operations team.</li><li>Ensured works are installed in accordance with project specifications and change control procedures.</li><li>Produced drawings and specifications for upgrades and new build designs.</li><li>Managed the full sales cycle of solar energy products for new residential clients</li><li>Monitored daily project execution and evaluated project progress, contract compliance.</li><li>Wiring low and medium voltage control panels.</li><li>Understand of Schematic Drawings (REVIT/ Auto-Cad)</li><li>Manufacturing and Assembly (Control Panels)</li><li>Assisting in test of Control Panels and Assemblies</li><li>Continuous improvement Initiatives</li><li>- Lean Manufacturing</li><li>- Compliance with Industry Quality Standards</li><li>SPDA Project - Lightning Protection System.</li><li>Electrical Substation Project;</li><li>Solar Projects;</li><li>Reasons for leaving: Move to Ireland.</li></ul> at Nova Engenharia