Oswaldo Herrera

• Maintained tools and equipment in good working condition.
• Followed instructions from construction project managers and supervisors.
• Erected scaffolding, frames and formwork.
• Helped project managers
• Followed safety protocols on job sites.
• Operated variety of power tools and hand tools.
• Removed debris and waste from job sites.
• Ran 6 & 8 inch pipe,buffed and grinded a whole 4 miles and did fabrication,
• Currently not employed there anymore because the job ended.

Pull Permits.

• Investigated accidents to identify causes and prevent future incidences.
• Prepared presentations about relevant topics such as fire prevention methods or personal protective equipment requirements.
• Inspected company buildings and job sites to identify possible hazardous conditions and immediately remedied these issues with corrective actions.
• Identified potential hazards in the workplace, developed solutions to eliminate or reduce risks.
• Provided health and safety orientations and developed materials for presentations.
• Developed emergency response plans and procedures to address hazardous situations.
• Determined root causes of accidents via in-depth investigations and identified potential prevention strategies to mitigate future risk.
• Provided guidance to employees on safe work practices, performed job hazard analyses and implemented corrective actions.
• Analyzed incident data to identify trends in injuries, illnesses and accidents.
• Analyzed accident trends and developed strategies to reduce risk exposure.
• Collaborated with engineers to institute controls or remedial measures for potentially hazardous conditions or equipment.
• Wrote technical reports, data entry and queries into various safety and health databases.
• Developed noise surveys, continuous atmosphere monitoring and ventilation surveys.
• Collaborated with engineers or physicians to institute control or remedial measures for hazardous or potentially hazardous conditions or equipment.
• Participated in incident investigations; conducted root cause analysis, identified corrective action plans and tracked completion status.
• Inspected equipment regularly to ensure proper functioning of safety features.
• Investigated adequacy of ventilation, exhaust equipment or lighting potentially affecting employee health and performance.
• Surveyed techniques used in transportation regarding use and storage of chemical agents and toxic materials.
• Supported health and safety technicians aligned to facility by providing guidance, coaching and direction.
• Inspected specified areas to verify presence of fire prevention equipment, safety equipment and first-aid supplies.
• Coordinated right-to-know programs regarding hazardous chemicals or other substances.
• Conducted trainings for company employees on safety initiatives to comply with federal regulations.
• Analyzed data to identify trends in injuries, illnesses or accidents.
• Provided advice on ergonomics best practices for reducing fatigue levels among workers.
• Recommended methods to reduce ongoing hazards with improved methods, processes and materials.
• Conducted weekly safety meetings and training sessions for new hires.
• Inspected or evaluated workplace environments, equipment or practices to verify compliance with safety standards and government regulations.
• Maintained and updated emergency response plans or procedures.
• Ordered suspending activities that posed threats to worker health or safety.
• Led teams of risk management and operational personnel in development of hazard analyses and risk assessments.
• Assisted in developing a comprehensive safety program that meets all applicable standards.
• Established an effective communication system between workers, supervisors and managers regarding job-related hazards and prevention measures.
• Ensured safety compliance with OSHA regulations and company policies.
• Trained new employees in proper safety procedures to minimize accidents with proper behaviors.
• Collaborated with management on implementation of health and safety initiatives.
• Developed and updated emergency response procedures.
• Participated in business safety committee meetings and health and safety audits.
• Investigated accidents and incidents, wrote reports and compiled data for management review.
• Created visual aids such as posters and handouts to remind workers of safe working practices.
• Performed regular safety drills to prepare workers for emergency scenarios.
• Prioritized and organized tasks to efficiently accomplish service goals.
• Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
• Utilized advanced technical skills and expertise to troubleshoot complex problems and implement solutions.
• Utilized various software and tools to streamline processes and optimize performance.
• Coordinated information programs regarding hazardous chemicals or other substances.
• Ordered suspension of activities posing threats to workers' health or safety.
• Conducted safety training or education programs to demonstrate use of safety equipment.
• Monitored worksites for unsafe conditions or behaviors, reported findings to supervisors.
• Spearheaded safety meetings with key members of organization to ascertain methods to improve overall safety for employees.
• Developed and maintained noise hygiene programs, continuous air monitoring and ventilation surveys.
• Recognized by management for providing exceptional customer service.
• Demonstrated strong problem-solving skills, resolving issues efficiently and effectively.
• Provided support and guidance to colleagues to maintain a collaborative work environment.
• Worked effectively in team environments to make the workplace more productive.
• Provided excellent service and attention to customers when face-to-face or through phone conversations.
• Conducted system analysis and testing to identify and resolve technical issues or inefficiencies.
• Conducted testing of software and systems to ensure quality and reliability.
• Contributed innovative ideas and solutions to enhance team performance and outcomes.
• Identified needs of customers promptly and efficiently.
• Achieved cost-savings by developing functional solutions to problems.
• Completed routine maintenance and repair.
• Updated and maintained databases with current information.
• Managed inventory and supplies to ensure materials were available when needed.
• Maintained updated knowledge through continuing education and advanced training.
• Operated a variety of machinery and tools safely and efficiently.
• Approached customers and engaged in conversation through use of effective interpersonal and people skills.
• Developed and implemented company procedures that reduced job site accidents [Number]%.
• Facilitated training for [Number] employees.

• Managed movement of materials and equipment to different job sites.
• Conducted tests on welds to ensure strength requirements were met.
• Maintained records of all repair work performed on boilers and related machinery.
• Measured and marked cutting lines on material using a ruler or scribe.
• Analyzed specifications, diagrams and blueprints for each job.
• Assembled parts into complete units by welding them together.
• Followed safety procedures and protocols to minimize equipment mishaps.
• Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
• Signaled to crane operator to lift components to specific positions.
• Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.
• Cut, formed and welded steel to make and repair metal components.
• Cleaned pressure vessel equipment by using scrapers, wire brushes, and cleaning solvents.
• Cleaned boiler firetubes with wire brushes to remove soot deposits after shutdowns.
• Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
• Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
• Opened, cleaned and repaired pressure vessels.
• Examined boilers, pressure vessels, tanks and vats to locate leaks, weak spots and defective sections.
• Identified issues and brought to attention of foreman.
• Worked with team to lift heavy sections into place using rigging and signals.
• Diagnosed problems with boilers and related equipment using technical manuals.
• Cut materials to size with torches and hand tools.
• Repaired worn or damaged parts of boilers, tanks, and vats by cutting out defective areas and replacing them with new plates or sections.
• Used oxyacetylene torch to cut through steel plate for fabrication purposes.
• Installed insulation on pipes, tanks, and other mechanical systems.
• Followed safety procedures when working around high-pressure systems.
• Designed, installed and repaired boilers used to heat water for generating electric power or providing heat.
• Replaced gaskets, valves, piping connections, and other components as needed.
• Shaped seams, joints, and irregular edges of pressure vessel sections and structural parts to attain specified fit of parts.
• Inspected welds visually for defects such as cracks or porosity.
• Tested equipment for proper operation following repairs or maintenance activities.
• Removed old insulation from pipes prior to installation of new insulation.
• Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
• Provided support and guidance to colleagues to maintain a collaborative work environment.
• Conducted system analysis and testing to identify and resolve technical issues or inefficiencies.
• Completed day-to-day duties accurately and efficiently.
• Maintained updated knowledge through continuing education and advanced training.
• Completed routine maintenance and repair.
• Worked with cross-functional teams to achieve goals.
• Provided excellent service and attention to customers when face-to-face or through phone conversations.