Patrick Toups
Shreveport,LA
Summary
I'm a welder by trade, structural for the most part. I do not believe in leaving any job unfinished. I'm motivated, passionate and hard working. I am my biggest critic, I always give my all to be as efficient and proficient with everything i do no matter the size or importance of the task. I try to be the best and most knowledgeable worker I can for me, the guy next to me and the company I work for.
Keep systems running smoothly and efficiently to support business needs. Detail-oriented and methodical professional well-versed in root cause analysis and performance improvements.
Overview
6
6
years of professional experience
Work History
Senior Mechanical Technician-Shift Lead
Benteler Steel/Tube
Shreveport , LA
07.2021 - Current
- Diagnosed mechanical problems and determined solutions to correct concerns.
- Installed, fit, cleaned and repaired valves, caps, hoses, pumps and gaskets.
- Operated pressure pumps, air electrical equipment and mechanical equipment.
- Cleaned, repaired and installed tank gaskets and internal and external valves.
- Performed root cause analysis of problems, documented faults in tracking system and generated daily reports.
- Validated mechanical systems, solved problems identified and assisted in equipment startups.
- Worked independently and as team member to develop design concepts that met business and technical needs.
- Used jigs, fixtures and tools for assembly of parts and components.
- Deposited intermittent tack welds for fit-up and alignment of work assemblies.
- Adjusted weld machines to correct settings for precision and waste reduction.
- Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
- Improved project completion time by managing multiple tasks using forklifts and other heavy equipment.
- Welded fabrication materials, continuously checking for safety and quality.
- Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
- Attended safety and training meetings to learn techniques to avoid injuries and mishaps.
- Assisted upper management with daily operations to meet standards of service and quality.
- Collaborated with team members to improve performance and implement training updates.
- Patrolled work areas to inspect operations, identify concerns and implement corrective actions.
- Planned and managed resources to consistently meet production, quality and cost goals.
- Reinforced rules to promote superior employee performance.
- Assessed operations and adjusted scheduling to maximize productivity.
- Prepared and planned worksites to help jobs run smoothly.
- Delegated work to staff, setting priorities and goals.
- Filled out work orders, repair logs and maintenance plans to document work completed.
- Trained and monitored employees to teach daily tasks and improve performance.
- Provided leadership, insight and mentoring to newly hired employees to supply knowledge of various company programs.
- Implemented onsite safety protocols and procedures and properly trained team members on prevention measures.
- Inspected completed work to assess quality and identify skill gaps.
- Delivered positive reinforcement and constructive criticism for employee work efforts.
- Performed preventive maintenance and troubleshooting on mechanical systems, equipment, and components.
- Conducted repair work to restore functionality of mechanical systems and components.
- Inspected, tested, adjusted, calibrated, and repaired mechanical systems and components.
- Repaired or replaced defective parts as necessary.
- Maintained accurate records of all repairs performed.
- Provided technical support to other departments as needed.
- Tested newly installed machines prior to their implementation into production.
- Demonstrated expertise in the use of hand tools such as wrenches, pliers, screwdrivers.
- Adhered to safety protocols while working with hazardous materials.
- Trained junior technicians on proper maintenance techniques for various machines.
- Maintained a clean work environment by properly disposing of waste material generated from repairs.
- Collaborated with team members, lending mechanical expertise to meet team goals.
- Assembled, integrated and repaired equipment or systems in accordance with appropriate standards and procedures.
- Supported continuous improvement efforts to improve efficiency and productivity of maintenance technicians.
- Monitored, inspected or tested mechanical equipment.
- Assembled or disassembled complex mechanical systems.
- Conducted failure analyses, documented results and recommended corrective actions.
- Prepared equipment inspection schedules, work plans or other records.
- Discussed changes in design, method of manufacture and assembly techniques with staff.
- Assisted in the training of new employees.
- Monitored employee performance and provided feedback on areas for improvement.
- Ensured that all safety protocols were followed at all times.
- Provided guidance and support to other team members as needed.
- Identified opportunities for operational improvements and communicated them to management.
- Participated in weekly meetings with management team to discuss strategies and goals.
- Delegated tasks to employees and monitored activities and task completion.
- Upheld company standards and compliance requirements for operations.
- Evaluated and performed equipment maintenance to support operational goals.
Welder/Material Handler
Sabre Industries
Bossier City , LA
01.2021 - 07.2021
- Observed inventory allocation to maintain material needs and production deadlines.
- Disposed of debris and hazardous materials properly to avoid contamination.
- Organized efficient daily work plans based on oral instructions and written directions to meet challenging objectives.
- Reported to foreman and supervisor, providing updates on anticipated task completion times to maintain timeline accountability.
- Performed repair work on welding equipment, notifying maintenance department of issues requiring more extensive repairs.
- Moved inventory items using forklift equipment safely to prevent accidents and mishaps.
- Operated forklifts and pallet jacks to move, pick up or store products.
- Operated overhead lifts to move heavy and bulky work materials.
- Operated equipment with focus on safety and efficiency.
- Heated, formed and dressed metal parts with hand tools, torch and arc welding equipment.
- Combined welding techniques, knowledge of metallurgy and engineering requirements to produce quality work.
- Set up equipment and welded parts according to welding chart specifications and type.
- Applied knowledge of metallurgy, geometry and welding techniques to determine optimal welding strategies.
- Obtained desired configurations by clamping and tack-welding components.
- Created precision pieces using application of electrode and gun along weld line.
- Improved project completion time by multi-tasking on heavy equipment such as forklifts.
- Adjusted weld machines to correct settings prior to weld applications for precision and waste reduction.
- Completed minor torch ups with MIG welders.
- Laid out, positioned, aligned and secured parts and assemblies with straightedges and combination square sand calipers.
- Maximized shop organization and equipment lifespan by maintaining equipment.
- Scraped off excess spatter and other materials using portable grinders and arc-cutting equipment.
- Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
- Removed loose materials and thick scale, slag or rust to prepare material surfaces for welding.
- Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
- Inspected chains, hammers and other tools for damage or wear to prevent injuries and accidents.
- Adjusted gas flow and pressure to create and maintain desired flames.
- Laid out, fitted and fabricated metal components.
- Set up and operated welding equipment to complete all welding projects on-time.
Dishwasher/Cook
Shavers Catering
Shreveport , LA
10.2020 - 01.2021
- Maintained consistent quality and high accuracy when preparing identical dishes every day.
- Set up and performed initial prep work for food items such as soups, sauces and salads.
Heavy Equipment Operator
Webster Gravel & Asphalt
Minden , LA
08.2020 - 10.2020
- Operated excavators and other construction equipment to properly grade land.
- Transported materials around construction sites to work locations.
- Kept equipment fueled and ready for immediate use to support scheduling demands.
- Recorded amount of fuel used in front end loader on weekly reports to supervisor.
- Maintained machinery by repairing and replacing broken and malfunctioning components.
- Monitored and used handheld mobile devices to communicate with supervisor and coordinate worksite resources.
- Employed heavy equipment operation best practices resulting in minimal complaints or incidents.
- Performed pre-shift and post-shift equipment inspections and completed all reports accurately to support company policy.
- Operated front end loader to move dirt and different base materials.
- Inspected and repaired equipment to maintain durability and optimal performance.
- Checked equipment for defects before and after shift and submitted report indicating equipment condition.
Mechanical Technician
Benteler Steel&Tube
Shreveport , LA
12.2018 - 05.2020
- Observed required safety measures when using tools like blow torches, wrenches and forklifts to maintain high safety standards.
- Dismantled machines, categorized parts by carefully documenting components and moved equipment into storage.
- Inspected operating safety devices for proper functionality after repairs, installations, modifications and installations.
- Assembled machines and bolted, welded or riveted components to foundation or other structures using hand tools and power tools.
- Maintained clean and environmentally safe work area.
- Repaired and lubricated machines and equipment and assembled and installed equipment using hand tools and power tools.
- Read diagrams and schematic drawings to determine work procedures.
- Signaled crane operator to lower basic assembly units to bedplate and aligned unit to centerline.
- Improved operations by working with team members and customers to find workable solutions.
Welder/Millwright Technician
3J Construction
Shreveport , LA
02.2018 - 12.2018
- Inspected operating safety devices for proper functionality after repairs, installations, modifications and installations.
- Assembled machines and bolted, welded or riveted components to foundation or other structures using hand tools and power tools.
- Dismantled machines, categorized parts by carefully documenting components and moved equipment into storage.
- Observed required safety measures when using tools like blow torches, wrenches and forklifts to maintain high safety standards.
- Read diagrams and schematic drawings to determine work procedures.
- Signaled crane operator to lower basic assembly units to bedplate and aligned unit to centerline.
- Maintained clean and environmentally safe work area.
- Repaired and lubricated machines and equipment and assembled and installed equipment using hand tools and power tools.
- Eliminated machine defects by recommending operational adjustments.
- Reviewed contractors' schedules and submission of shop drawings and samples.
- Identified design, process and equipment options to satisfy client needs, minimize costs and limit potential operational problems.
- Mentored and coached junior staff members by giving positive feedback and constructive criticism.
- Used troubleshooting methods to identify issues with mechanical tools.
- Heated, formed and dressed metal parts with hand tools, torch and arc welding equipment.
- Combined welding techniques, knowledge of metallurgy and engineering requirements to produce quality work.
- Set up and operated stress relief oven adhering to welding procedure parameters.
- Cleaned and degreased weld joints and workpieces efficiently.
- Set up equipment and welded parts according to welding chart specifications and type.
- Created safety guards, angle iron and square tubing.
- Inspected and repaired components to implement corrective action.
- Prevented distortion of parts by monitoring fitting, burning and welding processes.
- Applied knowledge of metallurgy, geometry and welding techniques to determine optimal welding strategies.
- Created precision pieces using application of electrode and gun along weld line.
- Improved project completion time by multi-tasking on heavy equipment such as forklifts.
- Obtained desired configurations by clamping and tack-welding components.
- Prepared broken parts for welding by properly grooving and scarfing surfaces.
- Adjusted weld machines to correct settings prior to weld applications for precision and waste reduction.
- Completed minor torch ups with MIG welders.
- Laid out, positioned, aligned and secured parts and assemblies with straightedges and combination square sand calipers.
- Scraped off excess spatter and other materials using portable grinders and arc-cutting equipment.
- Followed all safety guidelines, including proper machine guarding and lockout and tagout procedures.
- Maximized shop organization and equipment lifespan by maintaining equipment.
- Conducted precision cutting with power saws, hand shears and chipping knives.
- Operated manual and semi-automatic welding equipment to fuse metal segments together.
- Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
- Adjusted functional parts of equipment and control instruments.
- Removed loose materials and thick scale, slag or rust to prepare material surfaces for welding.
- Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
- Inspected chains, hammers and other tools for damage or wear to prevent injuries and accidents.
- Adjusted gas flow and pressure to create and maintain desired flames.
- Laid out, fitted and fabricated metal components.
- Set up and operated welding equipment to complete all welding projects on-time.
- Inspected grooves, angles and gap allowances with micrometer, caliper and precision measuring instruments.
Education
Technical Diploma in Welding/Welding Technology - Welding
NWLTC-Mansfield Campus
Mansfield, LA05.2014
Skills
- Materials handling and transport
- Certified forklift operator
- Stick Welding
- TIG welding expert
- Flux core (FCAW) welding
- Brake press operation
- Sheet metal fabrication
- Organizational skills
- Working collaboratively
- Time management
- Planning
- Mechanical tool usage
- Diagram and schematic knowledge
- Structural welding
- Issue and problem resolution
- Fusing and cutting
- Parts repair
- Machinery assembly
- Safety procedures
- Machinery dismantling
- Equipment inspections
- Fabrication
- Power tools operation
- Equipment preparation
- Material needs determination
- Issue resolution
- People skills
Timeline
Senior Mechanical Technician-Shift Lead
Benteler Steel/Tube
07.2021 - Current
Welder/Material Handler
Sabre Industries
01.2021 - 07.2021
Dishwasher/Cook
Shavers Catering
10.2020 - 01.2021
Heavy Equipment Operator
Webster Gravel & Asphalt
08.2020 - 10.2020
Mechanical Technician
Benteler Steel&Tube
12.2018 - 05.2020
Welder/Millwright Technician
3J Construction
02.2018 - 12.2018
Technical Diploma in Welding/Welding Technology - Welding
NWLTC-Mansfield Campus
Similar Profiles
WF Martin IIIWF Martin III
Mechanical Technician at Benteler Steel/TubeMechanical Technician at Benteler Steel/Tube
PAULO FIGUEIRAPAULO FIGUEIRA
HR Manager at BENTELER Steel/Tube Manufacturing CorpHR Manager at BENTELER Steel/Tube Manufacturing Corp
Joshua BreauxJoshua Breaux
Infrastructure Supervisor at Benteler Steel TubeInfrastructure Supervisor at Benteler Steel Tube