Paul Muniz
Lovelady,TX
Summary
Organized and dependable candidate successful at managing multiple priorities with a positive attitude. Willingness to take on added responsibilities to meet team goals.
Overview
14
14
years of professional experience
1
1
Certification
Work History
Shipping Supervisor
Chem Jet Inc
08.2022 - 01.2024
- Improved shipping efficiency by optimizing packing procedures and inventory management.
- Enhanced customer satisfaction through timely order processing and accurate shipment tracking.
- Managed shipping schedules for increased delivery accuracy and reduced lead times.
- Ensured regulatory compliance by properly labeling shipments, adhering to safety protocols, and maintaining documentation.
- Conducted regular inventory audits to minimize discrepancies between actual stock levels and system records.
- Trained new team members on company shipping processes, enhancing overall department performance.
- Maximized warehouse space utilization through strategic pallet stacking techniques and optimized storage layouts.
- Coordinated with procurement teams to monitor supply levels, ensuring adequate stock availability for continuous order fulfillment.
- Used Forklift to load and unloaded goods from trucks and containers.
- Implemented safety protocols in the workplace, reducing accidents and ensuring employee wellbeing.
Process Operator
AMYCEL
03.2019 - 05.2022
- Operate machinery while following production plant process to ensure the quality of products
- Perform daily job operations safely and efficiently while maintaining equipment and performing regular maintenance
- Clean checklist areas keeping workplace free of physical hazards sweep and mop floors to avoid chemical contamination level build up causing dust and debris hazards.
SubContractor/Installer
Dupar Distribution
08.2018 - 02.2019
- Obtain route paperwork from distribution office match serial numbers and location to ensure correct appliances have been selected for delivery and installation
- Search inventory building select correct appliances and load into cargo trailer with hand dolly while using proper technique without dropping or damaging items
- Appliances ranging from ranges, stove tops, microwaves, dishwashers, refrigerators, and deep freezers
- Acquire parts for appliances including wire plugs, washer hoses, dryer vents, and dishwasher water lines
- Upon arrival at customers residence match appliances to address and paperwork serial numbers to ensure correct appliance is delivered/installed
- Enter customers residence measure entrances and appliance sites assuring appliances will fit without damaging house interior
- Remove old appliances check previous appliance wiring application to see if wiring plugs are needed or if appliance will be hard wired(meaning it will be connected directly to homes electrical wiring)
- Load and haul away old appliances for customers who paid for haul away service or put old appliances in designated area determined by customer
- Unload and open appliances check for damages,if undamaged follow through with pre-installation by installing wire plugs(connect ground, negative,and positive wire connection to appliance), washer hoses, dryer vent hoses, and dishwasher waterlines
- After pre installation load appliance onto dolly enter customers home carefully and Install refrigerators by connecting water lines to homes water source and plugging in appliance
- Install dishwasher by connecting water line and drain line to corresponding connections
- If appliance is hardwired then match ground, positive, and negative wires to corresponding connections
- If wire plug is installed during pre installation then just plug in appliance
- Install oven once determined if item will be hardwired or wired during pre installation
- Install washing machine by connecting cold and hot water hoses to residence water connections and plug in.Install dryers by connecting dryer vent hoses and plugging in
- Make sure appliance turns on and functions properly to secure customers satisfaction.
Inventory Specialist Manager/Valve Technician
Express Employment Professionals
12.2016 - 07.2018
- Responsible for unloading frac valves and various other oilfield equipment with forklift and organizing loaded pallets in a way that ensures effective flow of traffic on the yard
- Moved frac valves, goat heads, well head trees and other fracking equipment into shop for repair using forklift
- Recovered assets, implemented stamping company serial numbers onto assets for tracking purposes and inventory sorting
- Recorded shipment info purchase order number's and customer serial numbers
- Conducted physical count of each item two times per day and record results in company database
- Trained all employees to check in, catalog and correctly ship high value merchandise in an effort to insure accurate inventory counts
- Performed quarterly quality compliance audits
- Ensured all property is accurately identified, tagged, and all documentation approved prior to transfer or final disposition.
Valve Technician
Express Employment Professionals
12.2016 - 07.2018
- Inspect, install, repair and trouble shoots surface wellhead systems in the shop and the field
- Comply with all safety rules and company policies of Eagle Pressure Control
- Oversee first installations on all start up projects
- Repaired all Eagle Pressure Control equipment ensuring no rig loss time
- Install all new products and equipment
- Assured all equipment, service tooling and spare parts are on location and ready to use and function fit prior to beginning each job
- Recorded critical dimensions to ensure assembly will work and obtain or create product running procedures
- Maintained communication with Company Representatives on issues including job procedures, spare parts requirements, function fit and critical dimension measurements
- Provide sales support through qualifying customer interface and keep customers fully informed of all aspects of the job
- Handle customer complaints in a professional, timely manner
- Completes Field Non-Conformance Reports (FNCR) forms as product problems are encountered
- Assure all equipment and procedural defects are communicated back to Eagle Pressure Control Service Management
- Prepare and submits Field Service Orders and other region required reports after each job is completed
- Understand and follow all Eagle Pressure Control and customer safety requirements
- Proactively pursue safe work practices, recommend safe work practices/procedures and participates in safety meeting sand safety training
- Assist with training of less experienced technicians.
Journeyman Apprentice
MRT
12.2015 - 12.2016
- Load semi trucks with various materials while ensuring weight limit does not exceed load capacity to comply with Texas Dps Weight Stations
- Drive semi truck equipped with water tank to water plant roads in order to keep dust down to keep coal clean actions enforced and regulated by EPA
- Drive semi truck equipped with dump body to transport and dump loose materials, such as sand, gravel, crushed rock, coal, or bituminous paving materials into landfill
- Collect samples from silos to ensure the material is in compliance with company standard
- Record measurements daily of material to estimate the remainder of material left in silo
- Perform daily walkthrough inspection assuring equipment is in top performing order air pressured valve systems, semi trucks
- Troubleshoot and repair air pressure valve systems used to transfer material into trucks
- Assist with truck repairs.
Hardband Machine Operator
Grant Prideco NOV
12.2014 - 12.2015
- Issued tolerance tests to evaluate weld quality and conformance to quality
- Removed rusts and rough spots from work pieces with grinders
- Grind down hardband to fit blue print specification in tie ends
- Salvaged and reworked pipe whenever needed
- Interpreted verbal and written instructions from work orders and blue prints
- Input correct length of arc and maintained speed of movement to form specified depth of fusion and bead
- Removed and repaired unacceptable welds with plasma cutter and grinder
- Inspected welds and checked that critical measurements met specifications upon completion
- Examined the structure and texture of parts to detect imperfections.
Cnc Press Brake operator
Cst Covers
08.2013 - 12.2014
- Clean dies and make sure press is running correctly
- Edge bend panels, flashing and other materials
- Correctly measure flashing and drill holes where blue prints specified
- Clean panels and crease them with press brake
- Place panels into crates using overhead crane to transfer to loading area.
General laborer
Surface transport
07.2010 - 07.2013
- Operated a forklift to load and unload trucks
- Kept sideboards, trailer tongues and back of truck free of materials
- Delivered proper material to production lines
- Operated heavy equipment including forklift and tractors
- Operated tools including hoist, saws, and drills.
Education
Bachelor of Science - Computer Engineering
South Texas College
Mcallen, TX05.2026
Full Stack Development Certificate - Computer Engineering
Tech Elevator
Houston, TX08.2024
Diploma -
Iola High School
05.2010
Skills
- Forklift Operator (8 years)
- Inventory Management
- Warehouse Inventory
- Warehouse Experience
- Press Brake Machine
- Welding
- Pallet jack
- Heavy lifting
- Adept in measuring material and setting up machines
- Fast learner
- Flexible
- Power tool operator
- Available to work in remote locations for long periods of time
- Excel and Word experience
- Logistics Management
- Computer Literacy
- Forklift Operation
- Decision Making
- Time Management
- Customer Service
- Process Improvement
- Multitasking Abilities
- Team Leadership
- Computer Skills
- Positive Attitude
- Warehouse Management
- Production Planning
- Supply Chain Distribution
- Shipping Procedures
- Problem Solving
- Staff Training
- Data Entry
- Document Management
- Customer Relations
- Office Administration
- Effective Communication
- Attention to Detail
Certification
Drivers License
Timeline
Shipping Supervisor
Chem Jet Inc
08.2022 - 01.2024
Process Operator
AMYCEL
03.2019 - 05.2022
SubContractor/Installer
Dupar Distribution
08.2018 - 02.2019
Inventory Specialist Manager/Valve Technician
Express Employment Professionals
12.2016 - 07.2018
Valve Technician
Express Employment Professionals
12.2016 - 07.2018
Journeyman Apprentice
MRT
12.2015 - 12.2016
Hardband Machine Operator
Grant Prideco NOV
12.2014 - 12.2015
Cnc Press Brake operator
Cst Covers
08.2013 - 12.2014
General laborer
Surface transport
07.2010 - 07.2013
Bachelor of Science - Computer Engineering
South Texas College
Full Stack Development Certificate - Computer Engineering
Tech Elevator
Diploma -
Iola High School
Similar Profiles
Queen KennyQueen Kenny
Camp Manager at CHEM CHEM SAFARI & PHILANTHROPYCamp Manager at CHEM CHEM SAFARI & PHILANTHROPY
Erin GreeneErin Greene
Cabin Hostess/ Trainer / Crew Resource Management Trainer at Jet Edge International / Vista JetCabin Hostess/ Trainer / Crew Resource Management Trainer at Jet Edge International / Vista Jet
George G. TaylorGeorge G. Taylor
Flight Operations Coordinator at Hop-A-Jet WorldWide Jet CharterFlight Operations Coordinator at Hop-A-Jet WorldWide Jet Charter
Hannah WelchHannah Welch
Licensed Realtor at NALicensed Realtor at NA
James HairJames Hair
Financial Examiner III at Texas Health And Human Service CommissionFinancial Examiner III at Texas Health And Human Service Commission