Summary
Overview
Work History
Education
Skills
Timeline
Generic

Ralph Ortega

Fernley,US

Summary

Throughout my career, I have gained experience in various roles within auto mechanics, warehouse worker, painter, and HVAC technician. My skills range from repairing or replacing a motor on a auto vehicle to painting a house or doing the HVAC and electrical all while prioritizing safety protocols. My experience within these various roles have equipped me with a unique blend of technical skills that would make me a good asset to any organization.

Overview

7
7
years of professional experience

Work History

HVAC Technician

ACCO Engineered Systems
09.2023 - Current
  • Performed troubleshooting on HVAC systems to determine root cause of issues.
  • Installed new heating, ventilation, and air conditioning systems in commercial buildings with precision and attention to detail.
  • Repaired and replaced motors, bearings and belts.
  • Troubleshot complex HVAC problems, identifying root causes and implementing effective solutions.
  • Utilized diagnostic equipment effectively in order to identify malfunctioning components within HVAC systems accurately.
  • Installed HVAC system expansions, discharge valves, air ducts, dampers, and stokers.
  • Used technical skills, tools, and techniques like soldering to repair parts.
  • Worked in strict compliance with applicable OSHA regulations and safety requirements.
  • Performed routine maintenance on heating and cooling systems.
  • Troubleshot and diagnosed issues with HVAC and refrigeration units.
  • Installed new air conditioning, heating and refrigeration systems according to manufacturer's specifications and local codes.
  • Repaired and replaced faulty motors, blowers, switches and compressor units.
  • Replaced "CRAC" critical air conditioning unit for server room at Switch Data center In sparks Nv,
  • General maintenance for Charter data canters
  • Replaced CRAH motors, checked sumps, pumps floats, dampers, expansion tanks, blow down skids, strainers, VFD's, exhaust motors, and preventative maintenance at Apple Data center.


Painter

Silver State Drywall and Paint
05.2023 - Current
  • Used scaffolding, staging, ladders, and planks, as well as following safety protocols to avoid falling to reach work area surfaces.
  • Used a motorized power washer to clean the exteriors of buildings.
  • Cleaned, smoothed, and primed trim, walls, and ceilings in preparation for painting using masker and scraper tools.
  • Cleaned and properly stored all equipment and supplies, as well as removing trash and debris from work areas at the end of each workday.
  • Used sandpaper, tape, and other materials to prepare surfaces and surrounding areas for painting.

Assistant Manager

Sierra Car Care and Tire Center
03.2021 - 11.2021
  • Exceeded sales targets and met business objectives by motivating employees and promoting targeted products.
  • Worked with the team to improve efficiency on various projects.
  • Kept track of cash receipts and deposits, improving accuracy and reducing discrepancies.
  • Weekly staff meetings were held to motivate employees, address concerns and questions, plan improvements, and assess progress toward objectives.
  • Created sales and productivity reports to help decision-makers improve their operations.
  • Surpassed sales targets and met business objectives by motivating employees.
  • Was in charge of overseeing employee performance, resolving issues, and increasing efficiency in order to meet productivity goals.
  • Was in charge of training employees and supervising production staff, department heads, and shift managers.
  • Procedures for opening and closing the store
  • I'm in charge of scheduling, inventory control, and stocking.
  • Ordering and receiving products
  • Kept work areas clean, organized, and safe to promote efficiency and team safety.
  • Assisted with the opening of the store by setting up office space, equipment, and point-of-sale systems.
  • Was in charge of dealing with general customer complaints and resolving conflicts.
  • Kept track of cash receipts and deposits, which resulted in increased accuracy and fewer discrepancies.
  • Taught my team members how to use effective strategies to meet operational and sales goals.

Mechanic

Sierra Car Care and Tire Center
04.2019 - 11.2021
  • Followed all safety procedures when using tools, equipment, and machinery.
  • Used evaluation instruments and visual and auditory observation to identify sources of problems that resulted in machinery malfunction to troubleshoot defective equipment.
  • Performed thorough vehicle inspections to look for leaks, damage, and other potential problems.
  • Replaced parts that were damaged, missing, or defective with new or refurbished parts.
  • Was in charge of overseeing general repairs carried out by new mechanics on staff.
  • Cleaned, lubricated, and calibrated machinery components to maintain peak operating performance.
  • Examined and tested equipment to look for worn or damaged components.
  • Performed oil changes, engine tune-ups, and fluid changes on vehicles according to OEM recommended maintenance schedules.
  • Used diagnostic and troubleshooting procedures to track down and pinpoint the source of mechanical problems.
  • Worked on diesel, natural gas, and propane generators, diagnosing and repairing mechanical issues.
  • Performed preventive maintenance such as engine tune-ups, oil changes, tire rotations, wheel balancing, and filter replacement while inspecting and testing vehicles.
  • Performed routine maintenance and repairs with hand and power tools to maximize reliability.
  • Used a variety of equipment, including multimeter, obd2 scanner/tablet, transmission flush machine, power steering flush machine, brake flush machine, tire mount and balance machine, and alignment machine in a safe and efficient manner.
  • Kept track of each repair and kept track of the customers for each job.
  • Diagnosed equipment problems by analyzing error messages and testing results.
  • Ordered repair parts and made sure that requests for parts were fulfilled on time.
  • Attended safety and training meetings to learn techniques to avoid injuries and mishaps.
  • Leveraged diagnostic tools and equipment to identify vehicle issues.
  • Repaired, replaced and adjusted brakes.
  • Adjusted and repaired systems to meet manufacturers' performance specifications.
  • Completed standard inspections to assess wear and damage to vehicles.
  • Removed old oil, replace filters and added correct amount of new oil.
  • Interpreted drawings and schematics to pinpoint sources of mechanical issues.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Tested components and systems using infrared engine analyzers, compression gauges and computerized diagnostic devices.
  • Maintained garage safety protocols to meet regulatory and company expectations.
  • Estimated costs of vehicle repair.
  • Examined loose bolts and specified safety devices on vehicles and made adjustments.
  • Inspected vehicles for damage and recorded findings to facilitate repairs.
  • Reviewed work orders and discussed with supervisors.
  • Assessed vehicles or machinery to accurately diagnose and repair issues.
  • Evaluated vehicle schematics to assess required parts and order accordingly.
  • Monitored shop equipment to maintain safe working condition.
  • Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
  • Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
  • Conducted test drives before and after repair services.
  • Kept detailed records of repairs, labor involved and parts used.
  • Trained and guided employees on correct methods for performing different repairs and maintenance services.
  • Completed simple and advanced repairs according to specifications for brakes, exhaust and electrical systems.
  • Engaged with customers to determine automotive requirements and communicate vehicular defects or problems.
  • Conveyed troubleshooting diagnosis to customer and outlined proposed repair plan and associated costs.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
  • Completed required paperwork and delivered to customer.
  • Executed preventive and corrective maintenance on work trucks and other vehicles.
  • Connected electrical wiring to control panels and electric motors.
  • Aligned wheels using special alignment equipment and wheel-balancing machines.
  • Reviewed brakes and assessed whether pads needed replacement, discs should be turned or other service requirements.

Forklift Driver

Randa Logistics
05.2018 - 04.2019
  • Followed maps and GPS systems to promptly complete tasks.
  • Packaged, labeled and tagged goods before transfer.
  • Transported material to correct locations and documented inventory changes.
  • Positioned lifting devices around loaded pallets, skids and boxes to secure materials for transport to designated areas.
  • Drove gasoline- or electric-powered vehicles to transport materials between loading, processing and storage areas.
  • Moved freight, stock and other materials to and from storage and production areas and loading docks.
  • Picked up warehouse debris and deposited waste into appropriate piles and stacked baled trash.
  • Moved levers or controls of lifting devices to load, unload or stack material.
  • Checked shipments for damaged or incorrect items.
  • Secured loads on pallets to minimize damage and worker injuries.
  • Relocated goods from dock area to appropriate storage locations.
  • Visually assessed materials for conformance to quality standards and shipping orders, removing nonconforming products and reporting for further action.
  • Prepared finished stock for shipment by identifying, pulling and packing product.
  • Estimated weights, heights and centers of balance to make precise placements.
  • Squared stacked displayed materials for safe and orderly conditions.
  • Inspected lifts before use to prevent damage to goods.
  • Maintained yard appearance, keeping ground clean and clear.
  • Weighed materials or products to record data on tags or labels.
  • Signaled workers to discharge, dump or level materials.
  • Tracked materials moved for stocking purposes and to complete logs for management.
  • Tied and secured loads to prevent shifting or damage to items.
  • Used handheld scanners for warehouse management system compliance.
  • Employed hand signals to communicate effectively with coworkers operating transport vehicles and direct movements from floor.
  • Unloaded incoming items from trucks and rail cars and transported materials to staging area.
  • Communicated with supervisor and other warehouse staff to coordinate work.
  • Reported safety and quality issues to management.
  • Loaded, unloaded, transported and stacked materials through careful operation of various warehouse equipment.
  • Maintained current forklift training and certification as required by company policies.

Education

High School Diploma -

Sparks High School
Sparks, NV

Skills

  • Great Problem Solver
  • Friendly and hardworking
  • Good mechanical aptitude
  • Forklift
  • Strong Strategizing
  • Electronics
  • Maintenance Work
  • Set-up, Maintenance, and Repair
  • Mechanics
  • Painting
  • Team Building
  • smog technician
  • Electrical wiring
  • Technical troubleshooting
  • Leak checks
  • System troubleshooting

Timeline

HVAC Technician

ACCO Engineered Systems
09.2023 - Current

Painter

Silver State Drywall and Paint
05.2023 - Current

Assistant Manager

Sierra Car Care and Tire Center
03.2021 - 11.2021

Mechanic

Sierra Car Care and Tire Center
04.2019 - 11.2021

Forklift Driver

Randa Logistics
05.2018 - 04.2019

High School Diploma -

Sparks High School

Similar Profiles

CREATE PROFILE
Ralph Ortega