Overview
Work History
Education
Skills
Timeline
Generic

Roel Saenz

Mission,TX

Overview

13
13
years of professional experience

Work History

Laborer general foreman

McDermott
Sabina, Tx
02.2025 - Current

Laborer General Foreman

McDermott
Sabine pass, Tx
02.2025 - Current
  • Performed regular checks of equipment for proper operation and safety compliance.
  • Assisted with basic maintenance tasks such as sweeping, mopping, painting, and cleaning.
  • Make sure wvery employe is working safe, and in safe coditions.
  • Make sure all the emples have all the tools needed fot task.
  • Assigned tasks to laborers and monitored their progress.
  • Provided direction, guidance and instruction to staff regarding job duties.
  • Developed efficient work plans for projects.
  • Dewater main trenches, excavations. Using diferent dewater pumps sizes
  • Reroute hoses, run hoses

Laborer Foreman

Mcdermott
Sabine Pass, TX
06.2024 - 02.2025
  • Make sure all the emples have all the tools needed fot task.
  • Assigned tasks to laborers and monitored their progress.
  • Provided direction, guidance and instruction to staff regarding job duties.
  • Developed efficient work plans for projects.
  • Dewater main trenches, excavations. Using diferent dewater pumps sizes
  • Reroute hoses, run hoses

Pipefitter

Belcan
Austin, Texas
05.2021 - 05.2024
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Install, maintain, and repair pipes used in heating, cooling, lubricating, sprinkler systems, manufacturing processes, and waste disposal.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Repair or replace worn parts such as seals and bearings on pumps and valves.
  • Perform routine maintenance on equipment such as checking fluid levels or replacing gaskets when necessary.
  • Locate blockages in lines using video cameras or other diagnostic equipment.
  • Install supports for pipes to keep them in place during installation process.

Concrete Finisher

Mcdermott
Willis, Texas
02.2019 - 02.2021
  • Mixed, poured and spread concrete using a variety of tools including trowels, floats and screeds.
  • Operated power vibrators to compact concrete into place.
  • Measured and cut reinforcing steel bars in order to reinforce the structure.
  • Leveled and smoothed freshly placed concrete with a straight edge or float.
  • Finished surfaces by hand-troweling or machine-troweling for a smooth finish.
  • Assisted in setting up formwork prior to pouring concrete.
  • Applied hardening compounds to protect the surface from weathering and staining.
  • Inspected work sites to ensure that all safety protocols were followed.
  • Sprayed curing compound on newly finished surfaces as needed.
  • Repaired damaged areas of existing concrete structures using appropriate materials.
  • Installed expansion joints, sealants, coatings, and other protective treatments according to specifications.
  • Monitored conditions of the job site to prevent damage or accidents due to wet cement or other hazardous materials.

Grout Foreman

PMI
Port Lavaca, TX
04.2018 - 01.2019
  • Developed and implemented safety protocols for the team.
  • Maintained daily logs of labor and equipment used on-site.
  • Ensured all workers adhered to company policies and procedures.
  • Conducted regular performance reviews with crew members.
  • Provided guidance, direction, and technical assistance to crew members.
  • Trained new employees in safety regulations, operational procedures, and company policies.
  • Managed inventory levels of supplies necessary for job completion.
  • Prepared surfaces and mixed mortar to prepare for cement installation.
  • Created custom forms for pouring concrete into a variety of shapes.
  • Cleaned up job sites after completion of projects by disposing of debris properly.
  • Repaired damaged surfaces by patching holes, filling cracks and replacing broken components of the surface structure.
  • Smoothed out imperfections from wet cement using special finishing tools.

• Pous grout on pumps, compressors. Epoxygrout.

Concrete Finisher

Fluor
Baytown, Texas
08.2014 - 02.2018
  • Mixed, poured and spread concrete using a variety of tools including trowels, floats and screeds.
  • Operated power vibrators to compact concrete into place.
  • Measured and cut reinforcing steel bars in order to reinforce the structure.
  • Assisted in setting up formwork prior to pouring concrete.
  • Finished surfaces by hand-troweling or machine-troweling for a smooth finish.
  • Leveled and smoothed freshly placed concrete with a straight edge or float.
  • Inspected work sites to ensure that all safety protocols were followed.
  • Sprayed curing compound on newly finished surfaces as needed.
  • Repaired damaged areas of existing concrete structures using appropriate materials.

Scaffold Builder

Basic llc
Corpus Christi, Texas
02.2013 - 11.2013
  • Assembled and erected scaffolding components according to blueprints, drawings, and instructions.
  • Installed guardrails, planks, ladders, and other safety equipment on scaffolds.
  • Inspected scaffolding for structural integrity prior to use.
  • Assisted in the dismantling of scaffold structures after completion of job.
  • Transported tools, supplies, and materials needed for erecting or dismantling scaffolds using hand trucks or forklifts.
  • Repaired damaged parts of existing scaffolds with welding torches or hammers as necessary.
  • Tied off all loose ends when constructing or deconstructing a scaffold structure with rope, wire ropes, chains to ensure stability.

Pipeline Construction Labor

Pumco
Cotulla, TX
03.2012 - 10.2012
  • Assisted with the installation of pipelines by using various tools and equipment such as shovels, backhoes, and augers.
  • Maintained records of materials used for pipeline construction projects.
  • Performed routine maintenance on all tools and equipment used in the pipeline laborer job.
  • Loaded and unloaded materials onto or from pallets, trucks, or other vehicles using a forklift.
  • Assisted with basic maintenance tasks such as sweeping, mopping, painting, and cleaning.
  • Worked with team members to ensure efficient workflow throughout the day.
  • Organized tools, supplies, and equipment needed for specific jobs according to instructions provided by supervisor.
  • Prepared surfaces prior to painting by sanding, scraping, patching holes, and filling cracks with putty or plaster.
  • Completed variety of physical labor tasks.
  • Maintained clean, safe working environment by removing debris from job site prior to shift completion.

Education

High School Diploma -

Veterans Memorial High School
Mission, TX
05-2011

Skills

  • Work in the construction industry for more than 10 years Working over 40 hrs a week In different weather conditions
  • Friendly and gently with all coworkers Always make sure to give the best results in work

Timeline

Laborer general foreman

McDermott
02.2025 - Current

Laborer General Foreman

McDermott
02.2025 - Current

Laborer Foreman

Mcdermott
06.2024 - 02.2025

Pipefitter

Belcan
05.2021 - 05.2024

Concrete Finisher

Mcdermott
02.2019 - 02.2021

Grout Foreman

PMI
04.2018 - 01.2019

Concrete Finisher

Fluor
08.2014 - 02.2018

Scaffold Builder

Basic llc
02.2013 - 11.2013

Pipeline Construction Labor

Pumco
03.2012 - 10.2012

High School Diploma -

Veterans Memorial High School
Roel Saenz