Scott Gordon

Worked with the crew on the Golden Gate Bridge verifying the proper environmental conditions were met, inspection of surface prep with the Golden Gate Bridge district inspectors, measuring profile, performing soluble salts tests, verifying coating mils, performing over 3000 pull off adhesion tests per project specifications, filled out Q.C reports for each work location, performed air monitoring during abatement. I also trained new workers in site specific safety procedures, surface prep, and coating application. I performed annual respirator fit testing for the crew and repaired equipment on the bridge.

Oversaw daily quality control and reporting for containment construction, sandblasting, and coating of water tanks.

Oversaw the coating of power plants by rigging spider baskets and swing stages. Supported operations from manlifts while performing daily quality control and reporting. Coated superstructure, smoke stacks, combustion turbines, stair towers, concrete acid pits, and piping across various locations nationwide.

1997-1999 Apprentice Painter Sacramento Regional Waste Water Treatment Plant sandblasting and coating clarifies, digesters, and pipes.

1999-2000 Vacuum Blasting and coating on the Oakland Bay Bridge out of a bucket truck.

2000-2003 San Francisco side of the Bay Bridge build class A1 containments, sandblasting, power tooling, and coating. Was promoted to Forman and drove all the big rigs with the sandblasting equipment mounted on 52' trailers on and off the road deck daily.

2003-2007 Worked as a painter Forman on many different structures penstocks, water tanks, creek bridges, freeway overpasses, and fuel vaults at the Denver Airport. Doing a wide range of Coatings