Shawn L. Wilson
Pearland,TX
Summary
Over 30 years of Commissioning/ Completions specialized in I&C, Electrical, operations, construction, supervision, commissioning, start-up of process control systems on MarineWell Containment Systems, LNG facilities, Coal and Gas Fired Power Plants, Petro Chemicals, Refinery. Responsibilities and work activities include FEED, Commissioning Engineer, Certification Completion Manager. Managed AWP workflows for completions packages to integrate into completions software. Managed and executed completions software for Easyplant, WinPCS, Go Completions.
Overview
26
26
years of professional experience
1
1
Certification
Work History
Commissioning/Completions Manager
T.EN (Technip Energies) N. America
02.2022 - 01.2025
- Commissioning Manager responsible for scheduling, testing, overseeing project commissioning of I&C components utilizing Easyplant project completions software on various Technip projects
- Duties include FEED activities
- L1, L2, L3 schedules, manpower loading, supervising team, implementing and managing team for commissioning activities
- Charged with AWP (Advanced Work Package) interface activities with AWP manager and interfaced with discipline AWP leads for scheduling
- Executed the loading of our completions software Easyplant and managed progress, quality, commissioning, preservation, punch list and turnover packages for client acceptance
- Responsibilities include office and field execution of instrument and controls engineering deliverables for project handover to client including instruments, loop checks, Manage and supervise Function Test procedures and Cause and Effect Testing Team, DCS Equipment Performance Testing
- Conducted performance evaluations to identify areas for employee growth.
Automation and Controls Lead Systems Engineer
MWCC (Woodgroup)
04.2013 - 12.2015
- Client Rep Lead Controls engineer for commissioning of two marine well containment vessels, Eagle Texas and Eagle Louisiana and their modular process units for crude oil recovery
- Responsibilities included execution of FAT on Rockwell Automation DCS equipment including AAdvance Safety Instrument Systems
- Lead engineer in troubleshooting DCS programming and new hardware as well as network architecture health
- Performed drawing and instrument engineering review for all devices associated with process control before complete assembly of process modules
- Reviewed and accepted construction commissioning packages for turnover to client
- Performed and managed client process walk downs for punch list of process control system and communication systems
- This included V-SAT, WAN, PAGA, UHF, VHF
- Assisted vendor on check out of all communication systems from ship to ship and ship to shore
- Responsibilities also included supervision of operators and loop check team for loop checks as well as all critical Cause and Effects process control testing on vessel
- Applied software changes in Rockwell AAdvance SIS system as needed for testing
- Performed Fire and Gas Test sequencing for Coast Guard acceptance
- Utilized Citadon, DMS, WinPCS and Go Completion database software for gathering all crucial documents for client packages
- Collaborated with clients to determine need and devise appropriate software and hardware solutions.
Project Completion Manager
Shaw Stone and Webster
02.2005 - 03.2013
- Completions Manager for tracking progress completion on various SHAW projects including combined cycle and coal fired power plants, scrubbers and ULSD refineries
- Utilized Complan Winpcs software for tracking project completion, QA, QC, preventative maintenance and punch list coordination
- Created scoped system boundaries using marked up P&ID’s and electrical single lines
- Performed client presentations and directed plant operational system walk downs
- Coordinated and managed completions personnel for system turnover for project completion on various SHAW projects
- Tracked all phases of commissioning for client turnover as well as completion packages
- Projects include Valero ULSD, Houston TX, Brunner Island PPL project, York PA, Rodemacher project, Alexandria LA, TURK project, Fulton AR
I&C Commissioning Engineer (NES Americas)
Odebrecht Company
04.2004 - 12.2004
- Control engineer in charge of construction, design, installation and testing of control system for two V94.2 Siemens simple cycle turbines with India BHEL generators
- Commissioning and Construction Engineer for 123Kv switchyard, MCC Equipment Building
- Duties included testing of Teleperm DCS for turbines and generator protection, included protection testing for 123Kv switchyard
- Lead in completion packages for turnover to client
I&E Engineer ( PIC )
Alstom Power Rentals
02.2004 - 04.2004
- Engineer duties include installation and check out of temporary 33Kv switchyard
- Installation and testing of 36 Caterpillar diesel generators with a total output of 40 megawatts
- Protection relay setpoint testing and breaker testing
- Controls check out of switchyard feeders for grid tie ins
- Utilized ABB DPU and Siemens differential relay controllers
I&C Controls Engineer ( REV 1)
Shaw Group, Covert Generating
07.2003 - 12.2003
- Controls Engineer responsible for the Commission, Testing, Start-up of 3 Mitsubishi Gas Turbines and Steam Turbines
- Supervised craft technicians and construction personnel in the check-out of the Mitsubishi D.D.C (Diasys) control system, calibration of the various D.D.C control modules, tested the communication link using the gateway computer interface with the Mitsubishi D.D.C and Westinghouse Ovation System
- Performed functional, interlock, and simulation testing for the Mitsubishi Gas and Steam Turbines start-up
Electrical Engineer ( P.I.C. )
Covert Generating
07.2002 - 06.2003
- PG&E Owner representative responsible for the construction, commissioning, testing and start-up of three Westinghouse (M501G) and Mitsubishi Steam Turbines
- Provided field technical services to the site manager, provided technical and administrative oversight of field construction and start-up activities
- Performed field inspection and monitoring, coordinated construction interface and quality checks, performed daily review of contractor technical documentation and ensure contractor compliance with EPC contracts
- Coordinated testing for all interface platforms for the Ovation DCS system
- Turned in a weekly, monthly progress report, percent completion reports
I & C DCS Engineer ( P.I.C. )
American National Power
12.2000 - 06.2002
- Responsible for the construction, testing, start-up and installation of the new Advent DCS Control System
- Reviewed the installation drawings, Electrical & I&C Specs, P&IDs and control loop diagrams, interfaced with contract personal with field and design changes, performed the logic check out of the DCS control functions with the DCS programmers for the Gas fired Turbines and Steam Turbine
- Represented American National Power and interfaced with the client for critical witness points for interlocks and trip testing
- Coordinated the field checks, signed off control loops and interfaced with the vendor on supplied equipment and plant documentation
- Witness the fire protection, installation, check out and start-up with the local and state inspectors
- Turned in a monthly progress report, interfaced with the client on two weeks look ahead on scheduled activities and construction man power
Electrical Field Engineer (TAVA Tech)
North Shore Sanitation District
03.1999 - 11.2000
- Coordinated the check out of the new Allen Bradley PLC and Genesis MMI Software for the wastewater treatment plant
- Responsible for the construction activities of the subcontractors in the installation of the process instrumentation, control valves, motors, switch gear per the construction specs, installation drawing, wiring schematics and P&IDs
- Scheduled the commissioning, start-up and testing for the various systems integration with engineers for twenty PLC’s and MMI programs
- Interfaced software changes needed for compatibility with existing equipment
- Interfaced with the client on milestones achieved during the month, scheduled manpower loading and held start-up meeting for the various construction contractors on the job site
Education
Instrument And Process Control
San Jacinto College
Pasadena, TXGeneral Studies -
Pearland High School
Pearland, TXSkills
- Management Skill
- Team leadership
- Detail Oriented
- Decision-making
- Problem Solving
- Microsoft Office Tools
Certification
- NFPA70E
- TWIC
- Safeland/SafeGulf
Timeline
Commissioning/Completions Manager
T.EN (Technip Energies) N. America
02.2022 - 01.2025
Automation and Controls Lead Systems Engineer
MWCC (Woodgroup)
04.2013 - 12.2015
Project Completion Manager
Shaw Stone and Webster
02.2005 - 03.2013
I&C Commissioning Engineer (NES Americas)
Odebrecht Company
04.2004 - 12.2004
I&E Engineer ( PIC )
Alstom Power Rentals
02.2004 - 04.2004
I&C Controls Engineer ( REV 1)
Shaw Group, Covert Generating
07.2003 - 12.2003
Electrical Engineer ( P.I.C. )
Covert Generating
07.2002 - 06.2003
I & C DCS Engineer ( P.I.C. )
American National Power
12.2000 - 06.2002
Electrical Field Engineer (TAVA Tech)
North Shore Sanitation District
03.1999 - 11.2000
Instrument And Process Control
San Jacinto College
General Studies -
Pearland High School
Similar Profiles
Rayan AlnajraniRayan Alnajrani
Process Engineer at TECHNIP ENERGIES Company (T.EN)Process Engineer at TECHNIP ENERGIES Company (T.EN)
Jean-Francois RossiJean-Francois Rossi
Vice President Commercial Decarbonization Solutions Business Line at Technip EnergiesVice President Commercial Decarbonization Solutions Business Line at Technip Energies
Anne du QuellennecAnne du Quellennec
Responsable QVCT at Technip Energies FranceResponsable QVCT at Technip Energies France