Sterling Schuller
Tucson,AZ
Summary
With over 11 years of experience in HVAC, plumbing, and mechanical construction projects, resourceful and skilled mechanical supervisor.Successfully managed government jobs, demonstrating ability to handle complex projects. Expertise in installation, repair, and maintenance of HVAC systems, boilers, piping, and other mechanical equipment. Strong background in interpreting blueprints, specifications, and adhering to industry codes and standards. Proven leader, effectively leading crews and providing guidance to junior technicians. Hold certifications including EPA Universal Certification, EPA Type II, and HVAC Certification. Trained in SAPF security room protocols and Cleanroom certified.
Overview
13
13
years of professional experience
1
1
Certification
Work History
Mechanical Supervisor
Berg Enterprises
11.2022 - Current
- Installed, repaired, and maintained heating, ventilation, and air conditioning (HVAC) systems in residential and commercial buildings
- Performed regular inspections of HVAC systems to identify any issues or potential problems
- Diagnosed malfunctions in HVAC equipment and made necessary repairs or replacements
- Collaborated with team members to complete installation projects within specified timeframes
- Tested HVAC systems to ensure proper functioning and efficiency
- Maintained accurate records of all maintenance and repair work performed on HVAC systems
- Assisted in the design and layout of new HVAC installations for residential and commercial buildings
- Performed load calculations to determine appropriate sizing requirements for new installations
- Maintained up-to-date knowledge of industry trends, technologies, codes, regulations, and best practices
- Collaborated with other tradespeople, such as electricians and plumbers, to ensure proper coordination of work
- Conducted system performance tests after installations or repairs to verify optimal functionality
- Trained junior technicians on proper procedures for installing, repairing, and maintaining HVAC systems
- Ensured compliance with safety regulations and guidelines while working on HVAC systems
- Interpreted blueprints and specifications to determine the layout of plumbing systems
- Installed, repaired, and maintained plumbing systems in residential and commercial buildings
- Installed water supply lines including pipes, fittings, valves, faucets, toilets, sinks, showers/tubs in accordance with building codes
- Tested plumbing systems for leaks using pressure gauges or other equipment; identified leaks and implemented necessary fixes
- Assisted apprentices in learning new skills through hands-on training sessions
- Managed inventory levels of supplies ensuring availability for ongoing projects
- Coordinated with contractors from other trades (e.g., electricians) during construction/renovation projects
- Inspected drainage systems for proper functioning and performed necessary repairs or replacements when needed
- Replaced or repaired defective pipes, fittings, valves, fixtures, or appliances using appropriate tools and materials
- Performed inspections to identify plumbing issues and recommend appropriate solutions
- Trained new hires on proper operation procedures, safety guidelines, and maintenance techniques
- Mentored junior technicians, providing guidance on complex repairs and troubleshooting techniques
- Managed the installation, maintenance, and repair of mechanical equipment in accordance with engineering specifications
- Coordinated with vendors to procure necessary parts and materials for repairs and replacements
- Oversaw the planning, coordination, and execution of mechanical construction projects
- Collaborated with project managers to develop cost-effective strategies for material procurement and equipment rental
- Led the installation, maintenance, and repair of HVAC systems, boilers, piping, and other mechanical equipment on construction sites
- Reviewed blueprints, specifications, and work orders to determine work procedures and materials required for each project phase
- Ensured that all mechanical installations met industry codes and standards such as ASME, ANSI, or NFPA
- Delegated team assignments, reviewed work and set schedules to maintain optimal coverage of all mechanical needs.
- Oversaw training and mentoring of team of Number mechanical service personnel.
- Trained mechanical department personnel in procedures and safety requirements.
- Supervised installation of different types of mechanical equipment, keeping work in line with drawings and specifications.
- Planned, designed, and scheduled phases for large projects.
- Met project deadlines without sacrificing build quality or workplace safety.
- Monitored progress against established goals, adjusting schedules and resources as needed to keep projects on track.
- Identified plans and resources required to meet project goals and objectives.
Sheet Metal Foreman
TRADESMEN INT'L
08.2020 - Current
- Have laid out floors with Procore, cut field offsets, ran only exposed spiral and square duct, can braze copper, run line sets, use zoom lock, rolled Jaid and PSP pipe
- Lead crews, read industrial and commercial blueprints, run forklift, skyjack, boom lift
- Installed fire dampers, duct smokes, shaft work, used gantry's for shaft duct, organized and separated floors of duct work
- Installed burglar bars, used gripple wire hangers, unistut hangers, installed sound boots
- Worked on High, Med, and low pressured systems, cut in drops, done seismic hangers and wire brackets
- Hung and installed heat pumps and gas pack units, installed wall heaters, installed 120" Louvers
Lead Installer
RITE WAY
06.2019 - Current
- I install new systems and ductwork into homes apartments and new construction
- Run new electric to units
- Run new thermostat wire and connecting new thermostats
- Testing systems
- I have my EPA and TEP certification
HVAC Lead
Comfort Systems USA Southwest
09.2018 - Current
- Install duct, fans, hang units, run flex duct, operate forklift, rigging certified, sky lift certified, forklift certified
HVAC Installer
Mission Heating And Cooling
04.2017 - Current
- Install New residential Equipment
- Run electric, condensate, thermostat, duct, run gas for cut ins
- Braze Line sets, Check levels
- Cut in registers
- Tar in stands seal duct
- Wire units make sure there running correctly
HVAC Formen
INTERSTATE MECHANICAL CORP
01.2018 - 09.2018
- Installed duct, fans, units, operated fork lift, set curbs
HVAC Lead/Foremen
Penn-Tek LLC
07.2015 - 10.2016
- Lead crews for installs
- Assigned crews to the jobs
- Walked them through plans to get job done
- Installed units, ran electric, gas, and trouble shoot units to make sure they ran correctly
- Hooked up thermostats
- Blew in insulation
- Sealed roofs
Forman/operator
Environmental Restoration, LLC
07.2012 - 12.2013
- Received, counted and stocked items
- Verify inventory computations by comparing them to physical counts of stock
- Store items in an orderly and accessible manner in warehouses, tool rooms, supply rooms, or other areas
- Clean and maintain supplies, tools, equipment, and storage areas to ensure compliance with safety regulations
- Keep records on the use or damage of stock or stock-handling equipment
- Examine and inspect stock items for wear or defects, reporting any damage to supervisors
- Supervised and assigned crews for work procedures
- Completed paperwork on all parcels, got totals of square footage, signed off when crews were done
- Blue staked parcels and marked out digging areas
Education
Criminal justice -
Pima community college
Tucson, AZ08.2007
High School Diploma -
Bisbee high school
Bisbee, AZ05.2007
Skills
- Quality Control
- Superintendent
- Fabrication
- Ductwork
- Plumbing
- Restoration Industry Experience
- Cooling
- Supervising experience
- Leadership
- HVAC
- Heating
- Hand Tools
- Schematics
- Inventory
- Mechanic Experience
- Communication skills
- Blueprint Reading
- Commercial construction
- Air Conditioning
- ProCore certified
- Refrigeration
- Operated Excavators
- Skid steers
- Forklifts
- Computer literate
- Foremen experience
- Hard worker and Reliable
- Organized and a Leader
- EPA
- Forklift
- Rigging
- Piping systems
- Hydraulic systems
- HVAC systems
- Multitasking Abilities
Certification
- Journeyman HVAC
- EPA Universal Certification
- Drivers License
- EPA Type II
- EPA Type III
- OSHA 10
- EPA Certification
- HVAC Certification
- 24 Hour Fall protection competent person
Timeline
Mechanical Supervisor
Berg Enterprises
11.2022 - Current
Sheet Metal Foreman
TRADESMEN INT'L
08.2020 - Current
Lead Installer
RITE WAY
06.2019 - Current
HVAC Lead
Comfort Systems USA Southwest
09.2018 - Current
HVAC Formen
INTERSTATE MECHANICAL CORP
01.2018 - 09.2018
HVAC Installer
Mission Heating And Cooling
04.2017 - Current
HVAC Lead/Foremen
Penn-Tek LLC
07.2015 - 10.2016
Forman/operator
Environmental Restoration, LLC
07.2012 - 12.2013
Criminal justice -
Pima community college
High School Diploma -
Bisbee high school
Similar Profiles
Michael WrightMichael Wright
Foreman at Berg EnterprisesForeman at Berg Enterprises
Natanael IbarraNatanael Ibarra
HVAC -R at Berg Enterprises (Heating/cooling)HVAC -R at Berg Enterprises (Heating/cooling)
Ayesha IbrahimAyesha Ibrahim
Business Services Consultant at Berg Kaprow Lewis-FSPGBusiness Services Consultant at Berg Kaprow Lewis-FSPG
Keano ChavezKeano Chavez
Assistant Club Manager at Tens Show ClubAssistant Club Manager at Tens Show Club
Daniel GaricaDaniel Garica
Project Director at Kustom USProject Director at Kustom US