Summary
Overview
Work History
Education
Skills
Accomplishments
Select Presentations and Lectures
Awards, Honors, Society Activities
Journal Articles, Book Chapters, Patents
Select Conference Abstracts/Proceedings
Timeline
Generic

Susan M Moore

Fayette City,PA

Summary

Motivated executive professional with a proven track record of advocacy for underserved populations (e.g., Indigenous Peoples) through research and the translation of research findings into practice through various intervention types including policies, best practice guidance, and technologies.


Experienced with establishing executive visions; developing strategic plans to meet executive visions; developing and implementing operational plans supporting strategic goals; and monitoring programmatic progress at the executive and front-line levels to ensure Agency success.

Overview

26
26
years of professional experience

Work History

Associate Director for Science

NIOSH NPPTL
08.2020 - Current

National Institute for Occupational Safety and Health (NIOSH)

National Personal Protective Technology Laboratory (NPPTL)

626 Cochrans Mill Road

Pittsburgh, PA 15236 United States

Research Science Officer (this is a federal job)

08/16/2020 – Present

Hours per week: 40

Series: 0601, Research Science Officer Pay Plan: GS (Ch. 51, 5 U.S.C.) Grade: 15-10

Salary: $183,500

Supervisor: Maryann D'Alessandro (412-386-4033) Okay to contact this Supervisor: Yes, if offer extended and accepted


  • Serve as primary Science Officer to the Division/Laboratory with oversight over laboratory, field, qualitative, quantitative, and clinical studies conducted, coordinated, or administered by engineers, biologists, statisticians, chemists, industrial hygienists, behavioral scientists, physical scientists, public health analysts, and others.
  • Review and officially clear documents and other materials for public dissemination or publication in scientific and other peer reviewed publications, according to the procedures set forth by CDC, NIOSH, and NPPTL including CDC's Domains of Excellence.
  • Oversee, provide guidance and ensure that all NPPTL scientific research and non-research, publications and communications meet the highest standards of quality and integrity and are in accord with all human subjects (45 CFR Part 46), Paperwork Reduction Act, and other ethical standards. Includes determining the applicability of 45 CFR Part 46 to NPPTL studies and crowdsourcing challenges.
  • Oversee, provide guidance, coordinate with others, and ensure that all NPPTL scientific research and non-research activities comply with information technology statutes, regulations, standards, and guidance. Includes determining whether study information constitutes "public data" in accordance to IT security requirements.
  • Provide scientific leadership and expertise in the development and execution of research projects, ensuring scientific soundness and technical feasibility.
  • Collaborate with leaders and scientists in other CIOs to coordinate and facilitate strategies, programs and procedures to ensure integration of CIO's science with CDC's broader scientific enterprise.
  • Collaborate with leaders, scientists, and other professionals from the private sector to facilitate the adoption of research recommendations - i.e., facilitate "research to practice."
  • Monitor scientific quality assurance programs, such as project peer review procedures, human subject protocols, coordination of research projects and assure that research projects are closed out in compliance with Agency procedures and monitor other Center procedures related to ensuring quality science in research activities.
  • Plan/oversee work to be accomplished by contractors, mentees, and workgroup participants where short-term priorities are set and adjusted, schedules prepared for completion of work, when necessary.
  • Provide senior leadership for the design and execution of complex partnerships and collaboration efforts.
  • Design and conduct strategic planning exercises.
  • Advise the NPPTL Director on matters of Agency importance and serve as her delegate, representing the Agency to external parties within the federal and private sectors.
  • Provide leadership to the NPPTL portfolio for underserved populations such as Indigenous Peoples.

Senior Scientist

NIOSH NPPTL
12.2016 - 08.2020

National Institute for Occupational Safety and Health (NIOSH)

National Personal Protective Technology Laboratory (NPPTL)
626 Cochrans Mill Road

Pittsburgh, PA 15236 United States

General Engineer (this is a federal job)

12/25/2016 – 08/16/2020

Hours per week: 40

Series: 0601, Research Science Officer Pay Plan: GS (Ch. 51, 5 U.S.C.) Grade: 15-9

Salary: $165,410

Supervisor: Maryann D'Alessandro (412-386-4033)
Okay to contact this Supervisor: Yes, if offer extended and accepted

  • Senior advisor to complex technical and managerial issues involving external parties impacted by the Agency portfolio, interface of science and policy, hiring and promotion challenges and strategies, and organizational norms and challenges.
  • Lead strategist and technical advisor for developing and implementing an investment and priority-setting strategy to inform Division's next decade of activities.
  • Lead strategist and technical advisor for developing and implementing approach to set and inform post-market priorities for non-respirator personal protective technologies.
  • Lead strategist for developing novel Research to Practice approaches and implementing these approaches with clearly defined case studies.
  • Technical advisor and mentor to junior and senior staff members.


Director

NIOSH OMSHR DMST
08.2013 - 12.2016

National Institute for Occupational Safety and Health (NIOSH)

Office of Mine Safety and Health Research (OMSHR)

Division of Mining Science and Technology (DMST)

626 Cochrans Mill Road

Pittsburgh, PA 15236 United States

Supervisory General Engineer (this is a federal job)

08/25/2013 – 12/25/2016

Hours per week: 40

Series: 0601, Research Science Officer Pay Plan: GS (Ch. 51, 5 U.S.C.) Grade: 15-5

Salary: $135,739

Supervisor: Jeff Kohler (412-831-1592) Okay to contact this Supervisor: Yes

  • Supervised and directed multi-unit operation with staff ranging from 25 to 70 employees including labor relations (e.g., adherence to Collective Bargaining Agreement and Agency policies).
  • Critical responsibilities include leadership for: scientific and programmatic direction; providing national guidance to public and private stakeholders, including regulators, standards bodies, and manufacturers; adopting consensus standards and leveraging 3rd party test labs; establishing concepts of operations and performance expectations for technologies; and testing technologies in lab and point-of-use environments to improve post-market performance.
  • Areas of oversight have included (1) health and safety technology development, including personal protective technology; (2) health communications; (3) surveillance, economic and statistical analysis; (4) computer programming; (5) human factors, including physiology, competency development, behavior optimization, cognition and physical performance.

Chief

NIOSH OMSHR DMST HCSRSB
07.2012 - 08.2013

National Institute for Occupational Safety and Health (NIOSH)

Office of Mine Safety and Health Research (OMSHR)

Division of Mining Science and Technology (DMST)

Health Communications, Surveillance, and Research Support Branch (HCSRSB)

626 Cochrans Mill Road

Pittsburgh, PA 15236 United States

Supervisory Health Scientist (this is a federal job)

07/15/2012 – 08/24/2013

Hours per week: 40

Series: 0601, Research Science Officer Pay Plan: GS (Ch. 51, 5 U.S.C.) Grade: 14-4

Salary: $108,417

Supervisor: Tom Barczak (unknown, retired) Okay to contact this Supervisor: N/A

  • Supervised and directed a multi-unit group of 25 to 30 staff responsible for providing health communications, surveillance, economic and statistical analysis, and computer programming support to a $50M, 200+employee organization with multiple geographic locations.
  • Conducted strategic planning activities to define Branch goals and objectives in accordance with organizational priorities.
  • Developed service portfolios for each work unit to clearly define and communicate expectations, services provided, and gap areas in need of additional resources.
  • Evaluated and improved the effectiveness of support functions provided.

Executive Management Intern to NIOSH Associate Director for Mining

NIOSH OMSHR
06.2010 - 12.2011

National Institute for Occupational Safety and Health (NIOSH)

Office of Mine Safety and Health Research (OMSHR)

626 Cochrans Mill Road

Pittsburgh, PA 15236 United States

Biomedical Engineer (this is a federal job, unofficial detail)

06/2010 – 12/2011

Hours per week: 40

Series: 0868, Biomedical Engineer Pay Plan: GS (Ch. 51, 5 U.S.C.) Grade: 13-7

Salary: $100,088

Supervisor: Jeff Kohler (412-831-1592) Okay to contact this Supervisor: Yes

  • Provided input to and developed communication pieces and metrics for success to support executive initiatives.
  • Collected, prepared, analyzed, and synthesized information to assist the Associate Director for Mining in the day-to-day work of the Office of Mine Safety and Health Research.
  • Provided input on the interface between science and policy.
  • Assisted the Associate Director for Mining with stakeholder interactions.
  • Assisted Associate Director for Mining with legislative proposals, proposed and final rules, and media interactions.

Lead Research Engineer

NIOSH OMSHR DMRO MIPB
08.2006 - 06.2010

National Institute for Occupational Safety and Health (NIOSH)

Office of Mine Safety and Health Research (OMSHR)

Division of Mining Research Operations (DMRO)

Mining Injury and Prevention Branch (MIPB)

626 Cochrans Mill Road

Pittsburgh, PA 15236 United States

Biomedical Engineer (this is a federal job)

08/14/2006 – 06/2010

Hours per week: 40

Series: 0858, Biomedical Engineer Pay Plan: GS (Ch. 51, 5 U.S.C.) Grade: 13-7

Salary: $100,088

Supervisor: Various (no longer with organization/retired) Okay to contact this Supervisor: N/A

  • Served as the Principal Investigator and Task Leader for several multi-year research projects involving kneepads, a critical form of personal protective equipment in low-seam mines.
  • Developed and executed research projects/tasks related to falls from equipment, injuries to maintenance and repair workers, knee injuries in low-seam mines, proximity detection, and economic justification for the use of roof screens and kneepads.
  • Conducted field data collection efforts to support research projects/tasks at underground and surface mines—data collection included survey, focus group, videography, photography, observational, and laser-based measurement techniques.
  • Conducted human subjects laboratory studies—instrumentation included motion tracking systems, force plates, goniometers, EMGs, and pressure sensors.

Graduate Student Researcher

UPMC At The University Of Pittsburgh
09.2000 - 05.2006

Bioengineering Department Office

University of Pittsburgh
Swanson School of Engineering
Department of Bioengineering

University of Pittsburgh Medical Center (UPMC)
302 Benedum Hall
3700 O'Hara Street
Pittsburgh, PA 15260

Graduate Student Researcher (this is not a federal job)

08/14/2006 – 06/2010

Hours per week: 60

Salary: $20,000

Supervisor: Richard Debski (412-648-1638) Okay to contact this Supervisor: Yes

  • Developed and executed protocols for mechanical testing of soft tissue structures including non-contact strain analysis techniques.
  • Developed and executed protocols for obtaining knee and shoulder joint mechanics.
  • Developed and executed protocols to manipulate knee and shoulder cadaveric joints to replicate human movements using 6-degree-of-freedom robotic manipulators—measurements of force, moment, and kinematics.
  • Constructed cadaver-specific finite element models of shoulder joint—obtained 3-D geometry of shoulder joint, assigned boundary conditions and constitutive modeling parameters, completed meshing of soft tissue structures, and evaluated strain distributions under prescribed joint motions which were validated with experimentally collected data.
  • Laboratory studies typically involved the following types of instrumentation—magnetic tracking devices, 6 degree-of-freedom robotic manipulators, force and moment sensors, materials testing systems, photogrammetry, CT scanners, and x-ray equipment.

Technology Research and Development Intern

Lexmark, Business Printer Division
05.1998 - 08.2000

Lexmark International, Inc.

Business Printer Division

Intern (this is not a federal job)

08/14/2006 – 06/2010

Hours per week: 20 during semester, 40 during summer

Salary: $20,000

Supervisor: Not available Okay to contact this Supervisor: N/A

  • Established experimental protocols to evaluate effect of laser printhead design changes on performance, noise, heat production, etc.
  • Utilized CAD to generate, detail, and assemble 3-D parts for experimental protocols.
  • Communicated with machinists about fabrication of parts for experimental testing (e.g. SLA, CNC).
  • Co-authored patent for novel methodology to interface mirrors and lasers to enhance printer productivity.

Education

Ph.D. - Bioengineering

University of Pittsburgh
Pittsburgh, PA
2006

Bachelor of Science - Mechanical Engineering

University of Kentucky
Lexington, KY
2000

Skills

  • Diversity, Equity, and Inclusion: Certified in Diversity to Belonging Facilitation; Certified in Culture Facilitation
  • Underserved Populations: Identify and Characterize Needs Challenges, and Barriers Faced and Develop Solutions
  • Partnerships: Agency Representative Responsible for Establishing, Leading, and Coordinating Partnerships
  • Leadership: Executive Vision, Strategic Planning, Operational Planning, Program Evaluation
  • Research: Paper-Based Studies, Laboratory-Based Studies, Field-Based Studies; Qualitative and Quantitative Data Types
  • Intervention Development: Best Practice Guidance, Policy Solutions, and Technology Solutions
  • Management/Supervision: Multiple Work Units and Multi-Disciplinary Work Units
  • Portfolio Leadership: Design and Execution of Complex, Technically Sound Projects Collectively Producing Impact

Accomplishments

  • Developed roadmaps, agendas, action plans, evidence packages, and other strategic documents for numerous research and service functions within the National Institute for Occupational Safety and Health (NIOSH) and demonstrated the downstream value of these efforts with high scores from externally conducted program reviews.
  • Launched a National Strategy for Equitable Personal Protective Equipment Protections for All U.S. Workers including leading the design and execution of a national workshop that identified numerous underserved worker segments in need of specialized support such as the data to fill knowledge gaps, policy solutions to impact market dynamics, and educational campaigns to protect the rights of migrant and English as a Second Language workers.
  • Coordinated and led partnerships to address complex challenges requiring multi-faceted solutions to meet the needs of underserved markets such as (1) breathing air supplies technologies used in underground coal mining that are subject to a complex regulatory landscape limiting technology innovation, (2) replacement criteria for protective clothing with a high-cost burden to volunteer adult and adolescent firefighters, and (3) small, regional hospitals unable to meet the cost burden of trusted and secure data exchange without a cost-sharing infrastructure with support from federal entities and larger hospital networks.
  • Obtained millions of dollars in external funding for field- and laboratory-based research to establish technology, education, policy, and guidance solutions to persistent challenges.
  • Designed and executed research activities leading to the distribution of hundreds of millions of N95 respirators past their shelf-life to address shortages during the beginning of the COVID-19 pandemic.
  • Ensured the technical soundness of crucial research activities supporting the COVID-19 pandemic by reviewing and approving research proposal and by coordinating urgent external reviews of these activities.
  • Develop standard operating procedures (SOPs) for administering high-quality research studies and for increasing the recruitment of diverse candidates for federal positions within a government agency.
  • Developed new, multi-million dollar program area within a government agency for PPE conformity assessment; included scoping, strategic direction, stakeholder relations, acquisition of funding, and internal operations activities.
  • Managed multi-million dollar program to commercialize technologies used to protect or enable workers including various respirator technologies and person wearable monitors for hazardous gases, tracking devices, and communication devices.
  • Reduced the risk of catastrophic mining events by infusing the industry with experts possessing advanced knowledge in ventilation and ground control health and safety.
  • Published 100+ journal articles, conferences proceedings, book chapters, patents, and government documents.

Select Presentations and Lectures

  • National Occupational Research Agenda (NORA) Public Safety Sector Council Meeting, Invited Speaker to provide an overview of the National Institute for Occupational Safety and Health's research related to per-and polyfluoroalkyl substances (PFAS), September 2023.
  • Facilitated deliberations following the U.S. Fire Administrator’s Summit on Fire Prevention and Control. Drs. Moore and her colleague Dr. Haas facilitated a 3-hour session with attendees to identify appropriate non-legislative plans of action in response to each testimony provided during the Summit, including what collaboration may look like. Emmitsburg, MD on October 12, 2022.
  • Impact on firefighters working in underserved communities. Presentation invited by the U.S. Fire Administrator for presentation as the U.S. Fire Administrator’s Summit on Fire Prevention – State of Science – in Emmitsburg, MD on October 11, 2022.
  • Evidence that creates impact. Invited presentation at the Truman Fire Forum in Independence, MO, on August 16, 2022.
  • The Society for Mining, Metallurgy & Exploration’s (SME) 2019 webinar series, Invited Presenter on Interstitial Lung Diseases, December 2019.
  • The United Steelworkers Health, Safety and Environment Conference, Workshop Presenter on the PPE Post-Market Experience, September 2019.
  • The Society for Mining, Metallurgy & Exploration’s (SME) 2018 webinar series, Presenter on Heinrich’s Safety Triangle, May 2018.
  • National Institute for Occupational Safety and Health's Turnout Gear Lifecycle Partnership Meeting, Principal Organizer and Presenter, July 2018.
  • National Institute for Occupational Safety and Health's Personal Protective Equipment Stockpile Partnership Meeting, Principal-Organizer and Presenter, April 2017 and May 2018.
  • National Fire Protection Association’s Technical Committee on Structural and Proximity Fire Fighting Protective Clothing and Equipment, Technical Presenter, January 2018, September 2018, and August 2019.
  • Michigan Technological University, Houghton, MI, Co-branded seminar series: Geological and Mining Engineering and Sciences Seminar and the Michigan Technological University's Women and Minority Lecture, Building the Career You Want at All Stages, Sponsored Lecturer, November 2016.
  • Queensland Mining Industry Health and Safety Conference, Townsville, Australia, Sponsored Key Note Lecturer, August 2014.
  • National Institute for Occupational Safety and Health's Breathing Air Supplies Partnership Meeting, Principal Organizer and Presenter, October 2014.
  • National Institute for Occupational Safety and Health's Refuge Alternatives Partnership Meeting, Presenter, 2014.
  • National Institute for Occupational Safety and Health's Office of Mine Safety and Health Research's Invitation-Only Workshop, Leveraging Workers' Compensation Systems to Reduce Health and Safety Challenges in U.S. and Colombian Small Mines, Invited Technical Expert, April 2011.
  • Consortium for Advanced Research in the Gas Industry, Symposium Hosted by the University of Wisconsin at Milwaukee, Invited Podium Presenter, 2010.
  • National Institute for Occupational Safety and Health's Personal Protective Technology Stakeholder Meeting, Invited Poster Presenter, March 2009 and March 2010.

Awards, Honors, Society Activities

  • National Institute for Occupational Safety and Health (NIOSH), Bullard-Sherwood Award for Research to Practice, Knowledge Category, Winner, presented to F Kilinc-Balci, C Coby, D Rottach, SM Moore, L Greenawald, P Yorio, R Shaffer, and M D'Alessandro. NIOSH applauds your project Updating ASTM Standards F2407 and F3352 to Ensure Healthcare Personnel Are Adequately Protected for its invaluable contribution to the health and safety of workers, 2023.
  • National Institute for Occupational Safety and Health (NIOSH), Bullard-Sherwood Award for Research to Practice, Honorable Mention, Knowledge Category presented to G Walbert, SM Moore, W Monaghan, and J Simons. NIOSH applauds your project NIOSH Long-Term Field Evaluation Study for its invaluable contribution to the health and safety of workers, 2023.
  • National Institute for Occupational Safety and Health (NIOSH), Bullard-Sherwood Award for Research to Practice, Honorable Mention, Intervention Category presented to L Greenawald, SM Moore, F Kilinc-Balci, and P Yorio. NIOSH applauds your project Research that Highlights Quality Concerns and the Need for Post-Market Quality Assurance Requirements for Surgical Gowns to Protect Healthcare Personnel for its invaluable contribution to the health and safety of workers, 2023.
  • Society for Mining, Metallurgy, and Exploration, Responsible Mining and Underground Construction Strategic Committee, 2020-2023.
  • National Institute for Occupational Safety and Health (NIOSH), Bullard-Sherwood Award for Research to Practice, Intervention Category Winner presented to L Greenawald, SM Moore, P Yorio. NIOSH applauds your project Coordinating Research to Practice: Activities that Informed the Release and Authorized Use of Millions of Expired Respirators from U.S. Stockpiles for its invaluable contribution to the health and safety of workers, 2021.
  • CDC/ATSDR Honor Awards, 69th Annual Event, Excellence in Emergency REsponse: Toby Merlin Award - Domestic presented to Susan Moore. COVID-19 Emergency Response Staff for unparalleled commitment to protecting the public's health and resolutely responding to one of the most devastating epidemics in American history, 2021.
  • CDC/ATSDR Honor Awards, 69th Annual Event, CDC Director's Award for Excellence in Public Health Impact presented to Susan Moore. NIOSH Personal Protective Technology Program for steadfast, dedicated, and impactful personal protective equipment research, evaluation, conformity assessment, and intervention actions to support the COVID-19 response, 2021.
  • CDC/ATSDR Honor Awards, 69th Annual Event, Excellence in Surveillance and Health Monitoring - Domestic presented to Susan Moore. Data, STrategy and Execution Work Group, Joint Coordination Cell, Washington DC for leading interagency efforts to provide comprehensive and timely data to support federal decision-making efforts to end the COVID-19 pandemic, 2021.
  • Nominated for demonstrating excellence in science as a candidate for Charles C. Shepard Science Award, Prevention and Control, awarded to PL Yorio, AS Laney, CN Halldin, DJ Blackley, SM Moore, K Wizner, LJ Radonovich, and LA Greenawald in recognition of your paper entitled Interstitial lung diseases in the U.S. mining industry: Using MSHA data to examine trends and the prevention effects of compliance with health regulations, 1996-2015. Risk Anal 38(9):1962:1971, 2019.
  • National Institute for Occupational Safety and Health (NIOSH), Alice Hamilton Award Honorable Mention for Excellence in Occupational Safety and Health, Epidemiology and Surveillance Category, presented to PL Yorio, AS Laney, CN Halldin, DJ Blackley, SM Moore, K Wizner, LJ Radonovich, and LA Greenawald for their leadership through science by publishing Interstitial lung diseases in the U.S. mining industry: Using MSHA data to examine trends and the prevention effects of compliance with health regulations, 1996-2015. Risk Anal 38(9):1962:1971, 2019.
  • National Institute for Occupational Safety and Health (NIOSH), Alice Hamilton Award for Excellence in Occupational Safety and Health, Epidemiology and Surveillance Category, presented to PL Yorio and SM Moore for their leadership through science by publishing Examining factors that influence the existence of Heinrich's Safety Triangle using site-specific H&S data from more than 25,000 establishments, 2018
  • National Institute for Occupational Safety and Health, Diversity Award, National Personal Protective Technology Laboratory’s Workplace Satisfaction Committee, 2019.
  • Society for Mining, Metallurgy, and Exploration, Health and Safety Division, Session Chair for Annual Meeting, 2018.
  • Society for Mining, Metallurgy, and Exploration, Health and Safety Division, Division Chair-elect, 2018.
  • National Institute for Occupational Safety and Health (NIOSH), NIOSH Diversity Star Award recipient, awarded by NIOSH Director, 2017.
  • Society for Mining, Metallurgy, and Exploration, Health and Safety Research & Educational Excellence Award, 2017.
  • Society for Mining, Metallurgy, and Exploration, Health and Safety Division, Program Coordinator for Annual Meeting, 2017.
  • Society for Mining, Metallurgy, and Exploration, Health and Safety Division, Session Chair for Annual Meeting, 2016.
  • Centers for Disease Control and Prevention Leadership Management Institute, Project Sponsor and Advisor, 2015, 2016.
  • National Institute for Occupational Safety and Health, National Occupational Research Agenda, Mining Sector Council, Appointed Council Manager, 2014, 2015.
  • Society for Mining, Metallurgy, and Exploration, Emerging Leaders Alliance Workshop, Funded by Society, 2013.
  • National Institute for Occupational Safety and Health (NIOSH), Response to Secretary of Labor's Request for an Independent Evaluation of the Mine Safety and Health Administration's Internal Audit Process Following the Upper Big Branch Mine Disaster, Invited by NIOSH's Associate Director for Mining to Contribute as the Information Coordinator , 2011, 2012.
  • Society for of Mining, Metallurgy, and Exploration Young Leaders Committee, Nominated and Society-Approved: Class of 2012.
  • American Society of Biomechanics, Program Contributor and Session Co-Chair for Annual Meeting, 2011.
  • National Institute for Occupational Safety and Health, Special Act Award, 2011.
  • Federal Executive Board, Excellence in Government Awards, Regional Competition, Outstanding Professional Employee (Medical/Scientific) Category, Bronze Award, 2010.
  • Federal Executive Board, Excellence in Government Awards, Regional Competition, Outstanding Team Category, Bronze Award, 2009.Distinguished Contributor and Subject Matter Expert, Ph.D. Candidate Dissertation (Christopher Reid), Development of an Injury Risk Model for the Knee, University of Central Florida, 2008.
  • National Institute for Occupational Safety and Health, Group Award, Human Factors in Mining Symposium, 2007.
  • Provost's Development Fund, Tuition and Stipend Grant, University of Pittsburgh, 2005.

Journal Articles, Book Chapters, Patents

  • Foreman, A.M., Omari, A., Marks, K.J., Troeschel, A.N., Haas, E.J., Moore, S.M., Fechter-Leggert, E., Park, J., Cox-Ganser, J.M., Damon, S.A., Gooch, J., Soileau, S., Maser, C., Bakshi, A., Chew, G. (under review). Knowledge, attitudes, and practices related to mold remediation following Hurricane Ida in Southeast Louisiana. Archives of Environmental and Occupational Health (In review)
  • NIOSH [2023]. Verifying Shelf Life for NIOSH Approved® Filtering Facepiece Respirators (FFRs). By Greenawald LA, Moore SM, Schall J, Powers JR. Pittsburgh, PA. U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 2023-128, https://doi.org/10.26616/NIOSHPUB2023128.
  • NIOSH, Pennsylvania Association of Hazardous Materials Technicians [2023]. Personal Protective Equipment Recommendations for Response to Chemical Suicide Incidents. By Attwood WR, Kiederer M, Greenawald L, Niemeier RT, Lyons B, Tantlinger C, and Moore S. Pittsburgh, PA: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. DHHS (NIOSH) Publication No. 2023-129, https://doi.org/10.26616/NIOSHPUB2023139.
  • Haas, E.J., Yoon, N.K., Furek, A., Casey, M., & Moore, S.M. (2023). The role of emergency incident type in predicting first responders’ health exposure risks. Journal of Safety Science and Resilience, 4, 167-173. https://doi.org/10.1016/j.jnlssr.2023.01.001
  • NIOSH [2022] PPE CASE: Performance of Stockpiled Level 3 Surgical Gowns Sampled from Six Stockpile Facilities. By Greenawald, LA, Susan M. Moore, Selcen Kilinc-Balci, Patrick L Yorio. Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, NPPTL Report Number P2022-0101.
  • Haas, E.J., Casey, M., Furek, A., Moore, S.M. (2022). Exploring U.S. healthcare and public safety workers’ perceptions at the onset of the COVID-19 pandemic. Professional Safety, 67(5), 16–21.
  • Haas, E.J., Casey, M., Furek, A., Aldrich, K., Ragsdale, T., Crosswy, S., & Moore, S. M. (2021). Lessons learned from the development and demonstration of a PPE inventory monitoring system for U.S. hospitals. Health Security, 19(6), 10 p. doi:10.1089/hs.2021.0098.
  • NIOSH [2021] PPE CASE: Evaluation of Fit and Strap Extension Performance of Stockpiled Filtering Facepiece Respirators from One U.S. Facility. By Greenawald LA, Moore SM, and Yorio PL. Pittsburgh, PA: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, NPPTL Report Number P2021-0102.
  • Haas, E.J., Furek, A., Casey, M., Yoon, K.N., & Moore, S.M. (2021). Applying the Social Vulnerability Index as a leading indicator to protect fire-based emergency medical service responders’ health. International Journal of Environmental Research and Public Health, Special Issue on Worker Safety, Health, and Well-Being in the USA, 18, 8049. doi: 10.3390/ijerph18158049.
  • Greenawald, L.A.; Moore, S.M.; Wizner, K. “Developing a Methodology to Collect Empirical Data that Informs Policy and Best Practices for Stockpiled Personal Protective Equipment”. American Journal of Infection Control, 2020.
  • Yorio, P.L., Haas, E.J., Bell, J.L., Moore, S.M., & Greenawald, L.A. (2020). Lagging or leading? Exploring the temporal relationship among lagging indicators in mining establishments 2006-2017. Journal of Safety Research, 74, 179–185.
  • Moore, S.M., Yorio, P.L., Haas, E.J., Bell, J.L., & Greenawald, L.A. (2020). Heinrich revisited: A new data-driven examination of the safety pyramid. Mining, Metallurgy & Exploration, 37(6), 1857–1863.
  • LA Greenawald, SM Moore, and PL Yorio. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Overall Performance of Nearly 4,000 Respirators Sampled from Ten Stockpile Facilities,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, March 25, 2020.
  • LA Greenawald, SM Moore, and PL Yorio. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Facility Ten of Ten,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, March 1, 2020.
  • LA Greenawald, SM Moore, and PL Yorio. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Facility Nine of Ten,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, March 1, 2020.
  • LA Greenawald, SM Moore, and PL Yorio. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Facility Eight of Ten,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, March 2020.
  • LA Greenawald, SM Moore, and PL Yorio. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Facility Seven of Ten,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, March 1, 2020.
  • LA Greenawald, SM Moore, and PL Yorio. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Facility Six of Ten,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, March 1, 2020.
  • LA Greenawald, SM Moore, and PL Yorio. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Facility Five of Ten,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, March 1, 2020.
  • LA Greenawald, SM Moore, and PL Yorio. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Facility Four of Ten,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, March 1, 2020.
  • LA Greenawald, SM Moore, and PL Yorio. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Facility Three of Ten,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, March 1, 2020.
  • LA Greenawald, SM Moore, and PL Yorio. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Facility Two of Ten,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and revention, National Institute for Occupational Safety and Health, March 1, 2020.
  • LA Greenawald, SM Moore, PL Yorio, and K Wizner. “NIOSH PPE CASE: Inhalation and Exhalation Resistance and Filtration Performance of Stockpiled Air-Purifying Respirators: Facility One of Ten,” Pittsburgh, PA U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, March 1, 2020.
  • PL Yorio and SM Moore. "Examining Factors that Influence the Existence of Heinrich's Safety Triangle using Site-Specific Health and Safety Data from More than 25,000 Establishments," Risk Analysis, Accepted June 28, 2017.
  • DP Snyder, JF Burr, SM Moore, and R Fernando. "MINER Act Technology; Past, present and future," Mining Engineering, December 2016, 45-54.
  • PL Yorio, DR Willmer, SM Moore. "Health and Safety Management Systems through a Multilevel and Strategic Management Perspective: Theoretical and Empirical Consideration," Safety Science, February 2015, 72, 221-228.
  • SM Moore, JL Kohler, GR Wagner. "Safety and Health in Mining in the United States," Arbete och Hllsa (Work and Health), University of Gothenburg, nr2013; 47(2), 137-149. SM Moore, JP Pollard, ME Nelson. “Task-Specific Postures in Low-Seam Underground Coal Mining,” International Journal of Industrial Ergonomics, 2012, 42(2), 241-248.
  • SM Moore, PG Dempsey, JJ Sammarco, TM Ruff, J Carr, WL Porter, M Reyes. “Understanding and Mitigating Equipment-Related Injuries,” Book Chapter in Design and Selection of Material Handling Equipment and Systems: Mining, Mineral Processing, Port, Plant and Excavation Engineering Volume II, 2011, Edited by: Jayanta Bhattacharya, Wide Publishing, Samar Sarani, Kolkata, India, 243-283.
  • JP Pollard, SM Moore, C Mark. “Reduced Workers' Compensation Costs with Roof Screening,” Journal of Safety, Health and Environmental Research, 2011, 7 (2), 23-29.
  • SM Moore, J Torma-Krajewski, LJ Steiner. “Practical Demonstrations to Enhance Ergonomics Training,” Government Publication – Report of Investigations, 2011: DHHS (NIOSH) Publication No. 2011-191; RI-9684: 1-68.
  • SM Moore, JP Pollard, WL Porter, S Gallagher, AG Mayton. “Demands on the Knee during Kneeling and Squatting Activities Common to Low-seam Mining,” 2011: DHHS (NIOSH) Publication No. 2011-176; RI-9681: 1-47.
  • B Ellis, N Drury, SM Moore, PJ McMahon, JA Weiss, RE Debski. “Finite Element Modeling of the Glenohumeral Capsule Can Help Assess the Tested Region During a Clinical Exam,” Computer Methods in Biomechanics and Biomedical Engineering, 1476-8259, 13(3), First published 2010: 413-418.
  • SM Moore, JP Pollard, SK Bhatt, C Mark. “Potential of Roof Screening to Reduce Workers' Compensation Costs,” Mining Engineering Magazine, Dec 2010, 49-54.
  • SM Moore, JP Pollard. “Evidence that Reducing Knee Injuries in Underground Mining may have a Substantial Impact on Mine Company Finances,” Journal of Safety, Health and Environmental Research, Winter 2010,6(3), Feature 4.
  • WL Porter, AG Mayton, SM Moore. “Pressure distribution on the anatomic landmarks of the knee and the effect of kneepads,” Applied Ergonomics, 2010, 42: 106-113.
  • SM Moore, B Ellis, JA Weiss, PJ McMahon, RE Debski. “The Glenohumeral Capsule Should be Evaluated as a Sheet of Fibrous Tissue: A Validated Finite Element Model,” Annals of Biomedical Engineering, 2010, 38(1): 66-76.
  • SM Moore, WL Porter, PG Dempsey. “Fall from Equipment Injuries in U.S. Mining: Identification of Specific Research Areas for Future Investigation,” Journal of Safety Research, 2009, 40: 455-460.
  • S Gallagher, SM Moore, PG Dempsey. “An Analysis of Injury Claims for Low-Seam Mines,” Journal of Safety Research, 2009, 40: 233-237.
  • SM Moore, J Stehle, EJ Rainis, PJ McMahon, RE Debski. “The Current Anatomical Description of the Inferior Glenohumeral Ligament Does Not Correlate with its Functional Role,” Journal of Orthopaedic Research, 2008 Dec: 26(12): 1598-604.
  • SM Moore, LJ Steiner, ME Nelson, K Fitzgerald, J Huber, AG Mayton. “Keeping Knees Healthy in Restricted Work Spaces: A Look at Low-seam Mining,” 2008: (NIOSH) 2008-130; IC-9504.
  • SM Moore, ER Bauer, LJ Steiner. “Prevalence and Cost of Cumulative Injuries over Two Decades of Technological Advances: A Look at Underground Coal Mining in the U.S,” Mining Engineering, 2008 January: 46-50.
  • RE Debski, SM Moore, EJ Rainis. “Mechanical Testing of Ligaments and Tendons,” In Encyclopedia of Biomaterials and Biomedical Engineering, 2006: Editors: Gary L. Bowlin, Gary Wnek, New York, Taylor & Francis.
  • J Stehle, SM Moore, DA Alaseirlis, RE Debski, PJ McMahon. “Acromial Morphology: Effects of Suboptimal Radiographs,” Journal of Shoulder and Elbow Surgery, 2007 March: 16(2): 135-142.
  • BJ Ellis, RE Debski, SM Moore, PJ McMahon, JA Weiss. “Methodology and Sensitivity Studies for Finite Element Modeling of the Inferior Glenohumeral Ligament Complex,” Journal of Biomechanics, 2007: 40(3): 306-12. Epub 2006 March 31.
  • V Musahl, SM Moore, PJ McMahon, RE Debski. “Orientation Feedback during Simulated Simple Translation Tests has Little Clinical Significance on the Magnitude and Precision of Glenohumeral Joint Translations,” Knee Surgery Sports Traumatology Arthroscopy, 2006 November: 14(11): 1194-1199.
  • RE Debski, JA Weiss, WJ Newman, SM Moore, PJ McMahon. "Stress and strain in the anterior band of the inferior glenohumeral ligament during a simulated clinical exam,” Journal of Shoulder and Elbow Surgery, 2005 Jan-Feb: 14 (1 Suppl S): 24S-31S.
  • SM Moore, M Thomas, S L-Y Woo, MT Gabriel, R Kilger, RE Debski. “A Novel Methodology to Reproduce Previously Recorded Six-Degree of Freedom Kinematics on the Same Diarthrodial Joint,” Journal of Biomechanics, 2005 May: 39(10): 1914-1923.
  • SM Moore, PJ McMahon, E Azemi, RE Debski. “Bi-directional Mechanical Properties of the Posterior Region of the Glenohumeral Capsule,” Journal of Biomechanics, 2005 June: 38(6): 1365-1369.
  • SM Moore, PJ McMahon, RE Debski. “Bi-directional Mechanical Properties of the Axillary Pouch of the Glenohumeral Capsule: Implications for Surgical Repair,” Journal of Biomechanical Engineering, 2004 Apr;126(2):284-288.
  • SM Moore, V Musahl, PJ McMahon, RE Debski. “Multi-directional Kinematics of the Glenohumeral Joint during Anterior and Posterior Drawer Tests: Impact on Clinical Diagnoses,” Journal of Orthopaedic Research, 2004 Jul: 22(4): 889-894.
  • RE Debski, SM Moore, JL Mercer, MS Sacks, PJ McMahon. “The Collagen Fibers of the Anteroinferior Capsulolabrum Have Multi-axial Orientation to Resist Shoulder Dislocation,” Journal of Shoulder and Elbow Surgery, 2003 May-Jun;12(3):247-52.
  • CG Chee, SM Moore, ED Ward II. “Rotatable Mirror Assembly for Optical Path Reversal in a Laser Scanning Machine,” Patent No. US 6,199,990 B1, March 13, 2001.

Select Conference Abstracts/Proceedings

  • Haas, E.J, Casey, M., Furek, A., Moore, S.M. (2021, September). Advancing a framework of OSH management through participation and communication in mobile technology platforms. Presented at the 2021 XXII World Congress on Safety & Health at Work Conference. Tract P17-13: Forget the old safety framework approach: Go for a great place to work. Toronto, Canada.
  • Haas,E.J., Moore, S.M., Casey, M., and Furek, A. (2021, July). Healthcare and EMS workers’ perceptions of risk and PPE confidence at the onset of the COVID-19 pandemic. Presentation provided at the 2021 NIOSH Intramural Science Meeting (NISM) July 29, 2021.
  • K Wizner, L Greenawald, P Yorio, SM Moore. "Developing a survey tool for identifying field-based factors that influence fire service turnout gear performance," Association of Schools & Programs of Public Health, Annual Meeting poster presentation, March 2017; Washington, DC.
  • SM Moore, R Stein, D Chirdon, SF KilincBalci. "Does it protect? The role of personal protective equipment in mining," Society of Mining, Metallurgy, and Exploration Conference Proceedings, February 2017; Denver, CO.
  • SM Moore, JP Pollard. “An Economic Justification for the Implementation of Interventions that Reduce Knee Injuries in Underground Mining,” PREMUS Conference Proceedings, August 2010; Angers, France.
  • SM Moore, JP Pollard, WL Porter, S Gallagher, AG Mayton. “Evaluation of muscle activity, forces, stresses, and moments at the knee during kneeling and squatting tasks,” PREMUS Conference Proceedings, August 2010; Angers, France.
  • AG Mayton, JP Pollard, WL Porter, SM Moore. “Pressure on the knee while performing a lateral lift from kneeling postures,” American Society of Biomechanics Conference Proceedings, August 2010; Providence, RI.
  • SM Moore, JP Pollard, S Bhatt, C Mark. “An Analysis of the Potential of Roof Screening to Reduce Workers' Compensation Costs,” Society for Mining, Metallurgy & Exploration Conference Proceedings, March 2010; Phoenix, AZ.
  • SM Moore, WL Porter, AG Mayton. “Pressures Applied to Anatomical Landmarks of the Knee While in Kneeling Postures,” American Society of Biomechanics Conference Proceedings, August 2009; State College, PA.
  • SM Moore, ER Bauer, LJ Steiner. “Prevalence and Cost of Cumulative Injuries over Two Decades of Technological Advances: A Look at Underground Coal Mining in the U.S.,” Society for Mining, Metallurgy and Exploration Conference Proceedings, February 2001; Denver, CO.
  • EJ Rainis, S Maas, BJ Ellis, SM Moore, JA Weiss, RE Debski. “Regional Variations in the Material Properties of the Glenohumeral Capsule: Implications for Function”. 5th World Congress of Biomechanics, July 29-August 4, 2006; Munich, Germany, Abstract 4816.
  • SM Moore, BJ Ellis, JA Weiss, PJ McMahon, RE Debski. “Discrete Versus Composite Modeling of the Glenohumeral Capsular Regions: Effect on Predicted Strain Distribution.” 5th World Congress of Biomechanics, July 29-August 4, 2006; Munich, Germany, Abstract 4935.
  • SM Moore, EJ Rainis, N Bailey, PJ McMahon, RE Debski. “Direction of Strain in the Anterior Inferior Glenohumeral Ligament for Clinically Relevant Joint Positions.” 5th World Congress of Biomechanics, July 29-August 4, 2006; Munich, Germany, Abstract 4938.
  • Rainis E, SM Moore, JA Weiss, H Henninger, RE Debski. “Can an Isotropic Constitutive Model be Utilized for the Glenohumeral Capsule?” 2006 Summer Bioengineering Conference, June 21-25, 2006; Amelia Island, FL, Abstract BIO2006-157708.
  • N Bailey, SM Moore, EJ Rainis, J Stehle, PJ McMahon, RE Debski. “Repeatability of a Methodology to Determine the Strain Distribution Across the Glenohumeral Capsule: Implications for Future Studies.”. 2006 Summer Bioengineering Conference, Amelia Island, FL, Abstract BIO2006-157702, June 21-25, 2006.
  • SM Moore, Bailey N, PJ McMahon, RE Debski. “Anatomy and Function of the Inferior Glenohumeral Ligament of the Shoulder: Is our Description Correct?” 2006 Summer Bioengineering Conference, June 21-25, 2006; Amelia Island, FL, Abstract BIO2006-157645.
  • SM Moore, EJ Rainis, JH Stehle, PJ McMahon, RE Debski. “Strain Distribution Throughout Inferior Glenohumeral Capsule May Impact Surgical Repairs: Subject-Specific Effects of External Rotation,” 52th Annual Meeting of the Orthopaedic Research Society, March 19-22, 2006; Chicago, IL, Paper No.80.
  • SM Moore, SL-Y Woo, RE Debski: “Accuracy of Reproducing the Motion of Knee and Shoulder Diarthrodial Joints using Robotic Technology.” 2005 Summer Bioengineering Conference, June 22-26, 2005; Vail, CO, Abstract 269548.
  • EJ Rainis, SM Moore, J Stehle, PJ McMahon, RE Debski. Effect of Pressure on Determining the Nominal Strain State of the Inferior Glenohumeral Ligament Complex. 2005 Summer Bioengineering Conference, June 22-26, 2005; Vail, CO, Abstract 271964.
  • J Stehle, SM Moore, RE Debski PJ McMahon. “Acromial Morphology: Effects of Different Projection Angles.” 5th Biennial ISAKOS (International Society of Arthroscopy, Knee Surgery, and Orthopaedic Sports Medicine) Congress, April 3-7, 2005; Hollywood, FL, Paper No. 30.
  • JH Stehle, SM Moore, DA Alaseirirlis, RE Debski, PJ McMahon. “Acromial Geometry Can Be Quantified Reliably to Identify Risk Factors for Rotator Cuff Pathology,” 51th Annual Meeting of the Orthopaedic Research Society, February 20-23, 2005; Washington, DC, Paper No.616.
  • SM Moore, RE Debski, B Ellis, PJ McMahon, JA Weiss. “All Three Regions of the Inferior Glenohumeral Ligament Contribute to Anterior Stability,” 51th Annual Meeting of the Orthopaedic Research Society, February 20-23, 2005; Washington, DC, Paper No.804.
  • SM Moore, PJ McMahon, RE Debski. “Inferior Results Observed in Females Following Surgical Repair May Not Be Due to the Mechanical Properties of the Shoulder Capsule,” International Symposium on Ligaments & Tendons – V, February 19, 2005; Washington, DC, p. 52.
  • SM Moore, MT Gabriel, M Thomas, J Zeminski, SL-Y Woo, RE Debski. “The Effect of Accuracy of Various Measuring Devices on Recorded Joint Kinematics,” 2004 International Mechanical Engineering Congress & Exposition, November 13-19, 2004; Anaheim, CA, IMECE2004-61551.
  • SM Moore, MT Gabriel, M Thomas, J Zeminski, SL-Y Woo, RE Debski. “Joint Kinematics are Significantly Affected by the Location of Tracking Device Sensors,” 2004 Biomedical Engineering Society Annual Fall Meeting, October 13-16, 2004; Philadelphia, PA, p. 1139.
  • WJ Newman, RE Debski, SM Moore, JA Weiss. Development and Validation of a Finite Element Model of the Axillary Pouch of the Glenohumeral Joint. 2003 International Mechanical Engineering Congress & Exposition, November 15-19, 2003; Washington, D.C., IMECE2003-43137.
  • SM Moore, M Thomas, MT Gabriel, J Zeminski, SL-Y Woo, RE Debski. Reproducing the Motion of a Diarthrodial Joint during a Clinical Examination using Robotic Technology. 2003 International Mechanical Engineering Congress & Exposition, November 15-19, 2003; Washington, D.C., IMECE2003-43074.
  • SM Moore, PJ McMahon, RE Debski. Bi-directional Mechanical Properties of the Posterior Region of the Glenohumeral Capsule. 2003 ASME Summer Bioengineering Conference, June 25-June 29, 2003; Key Biscayne, FL, p. 107-108.
  • M Thomas, SM Moore, Y Takakura , RE Debski, SL-Y Woo. Can Assessing the 6-degree of Freedom Kinematics of the Knee during the Anterior Drawer Test Improve Clinical Diagnosis of a Partially Torn Anterior Cruciate Ligament. 2003 ASME Summer Bioengineering Conference, June 25-June 29, 2003l Key Biscayne, FL, p. 455-456.
  • V Musahl, SM Moore, PJ McMahon, RE Debski. Glenohumeral Joint Kinematics During Anterior - Posterior Drawer Tests. 4th Biennial ISAKOS (International Society of Arthroscopy, Knee Surgery, and Orthopaedic Sports Medicine) Congress, March 10-14, 2003; Auckland, New Zealand, Paper No. 212.
  • M Thomas, SM Moore, Y Takakura, RE Debski, SL-Y Woo. Can Assessing the 6-Degree of Freedom Kinematics of the Knee during the Noulis-Lachman Test Improve Clinical Diagnosis of a Partially Torn Anterior Cruciate Ligament?, 49th Annual Meeting of the Orthopaedic Research Society, February 2-5, 2003; New Orleans, LA, Paper No.125.
  • WJ Newman, RE Debski, J Gardiner, SM Moore, JA Weiss. Function of the Anterior Band of the Inferior Glenohumeral Ligament during the Load and Shift Test. International Mechanical Engineering Congress & Exposition, November 20-23, 2002; New Orleans, LA, IMECE2002-32497.
  • SM Moore, V Musahl, PJ McMahon, RE Debski. Kinematics Of The Glenohumeral Joint During The Anterior And Posterior Drawer Test. IV World Congress of Biomechanics, August 4-9, 2002; Calgary, Canada, Paper No. 995.
  • SM Moore, V Musahl, PJ McMahon, RE Debski. Coupled Translations Of The Glenohumeral Joint In Response To Anterior And Posterior Drawer Tests. International Shoulder Group Meeting, June 16-18, 2002; Cleveland, OH, p. 45.
  • RE Debski, SM Moore, PJ McMahon, JL Mercer. Random Collagen Fiber Architecture in the Axillary Pouch of the Inferior Glenohumeral Ligament: Effect on Capsular Shift Procedures. 48th Annual Meeting of the Orthopaedic Research Society, February 10-13, 2002; Dallas, TX, Poster No. 0633.
  • SM Moore, PJ McMahon, RE Debski. Bi-directional Mechanical Properties of the Axillary Pouch of the Glenohumeral Capsule: Implications for Surgical Repair. 48th Annual Meeting of the Orthopaedic Research Society, Dallas, February 10-13, 2002; TX, Poster No. 0916.

Timeline

Associate Director for Science

NIOSH NPPTL
08.2020 - Current

Senior Scientist

NIOSH NPPTL
12.2016 - 08.2020

Director

NIOSH OMSHR DMST
08.2013 - 12.2016

Chief

NIOSH OMSHR DMST HCSRSB
07.2012 - 08.2013

Executive Management Intern to NIOSH Associate Director for Mining

NIOSH OMSHR
06.2010 - 12.2011

Lead Research Engineer

NIOSH OMSHR DMRO MIPB
08.2006 - 06.2010

Graduate Student Researcher

UPMC At The University Of Pittsburgh
09.2000 - 05.2006

Technology Research and Development Intern

Lexmark, Business Printer Division
05.1998 - 08.2000

Ph.D. - Bioengineering

University of Pittsburgh

Bachelor of Science - Mechanical Engineering

University of Kentucky
Susan M Moore