Zachary Grzeszczak

Similar Profiles

• William DavisWilliam Davis

  Equipment Operator/ Quality Control Technician at Vulcan Materials CompanyEquipment Operator/ Quality Control Technician at Vulcan Materials Company

• Rohit RathorRohit Rathor

  <ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group<ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group

• JAMES J. SMITHJAMES J. SMITH

  <ul> <li>Performed preventive maintenance on industrial machinery and equipment.</li> <li>Identified mechanical issues through visual inspection and testing of components.</li> <li>Repaired or replaced malfunctioning parts, including motors, pumps, valves, seals, bearings.</li> <li>Assign maintenance tasks and ensure compliance with quality standards</li> <li>Operated hand tools to repair or replace defective parts.</li> <li>Inspected moving parts for wear or damage on a regular basis to prevent breakdowns.</li> <li>Dismantled defective machines and reassembled them after repairs were made.</li> <li>Maintained records of all work performed in the form of written reports or computer logs.</li> <li>Troubleshooted electrical control systems using schematics and other diagnostic tools.</li> <li>Maintained a safe working environment by adhering to safety regulations and standards.</li> <li>Reviewed schedules with the maintenance team before 5S audits</li> <li>Conduct routine inspections of hoists and cranes for operational safety</li> <li>Implemented solutions to prevent future problems</li> <li>Key Equipment: Hytrol Conveyors, Automated See Grid Systems, Auto Store, Dematic Conveyors, Gorbel Hoists, and Coffin Hoists</li> </ul> at AMENTUM<ul> <li>Performed preventive maintenance on industrial machinery and equipment.</li> <li>Identified mechanical issues through visual inspection and testing of components.</li> <li>Repaired or replaced malfunctioning parts, including motors, pumps, valves, seals, bearings.</li> <li>Assign maintenance tasks and ensure compliance with quality standards</li> <li>Operated hand tools to repair or replace defective parts.</li> <li>Inspected moving parts for wear or damage on a regular basis to prevent breakdowns.</li> <li>Dismantled defective machines and reassembled them after repairs were made.</li> <li>Maintained records of all work performed in the form of written reports or computer logs.</li> <li>Troubleshooted electrical control systems using schematics and other diagnostic tools.</li> <li>Maintained a safe working environment by adhering to safety regulations and standards.</li> <li>Reviewed schedules with the maintenance team before 5S audits</li> <li>Conduct routine inspections of hoists and cranes for operational safety</li> <li>Implemented solutions to prevent future problems</li> <li>Key Equipment: Hytrol Conveyors, Automated See Grid Systems, Auto Store, Dematic Conveyors, Gorbel Hoists, and Coffin Hoists</li> </ul> at AMENTUM

• NANCY BRYANTNANCY BRYANT

  Quality Assurance Technician, Lead Quality Control Technician, Quality Control Inspector at Cp Medical, RiverpointQuality Assurance Technician, Lead Quality Control Technician, Quality Control Inspector at Cp Medical, Riverpoint