Biko Osuji

Work History

Haul Truck Operator/Pit Utility

Eagle Specialty Materials

Gillette , WY

11.2021 - 12.2023

Operated haul truck to transport material from stockpiles to processing plants and other designated areas.
Monitored haul truck performance, checked brakes, lights, steering, and oil levels.
Adhered to safety protocols while operating haul truck including wearing protective gear and following traffic regulations.
Maintained accurate records of loads transported and reported any issues encountered during operation.
Communicated with supervisors regarding operational concerns or potential problems with equipment.
Conducted periodic visual inspections of haul truck exterior components such as mirrors, lights, windshield wipers.
Reported any mechanical issues related to the truck's engine or transmission system immediately upon discovery.
Assisted other drivers by providing directions or advice when needed while en route between job sites.
Maintained constant telephone or radio contact with dispatch center for instructions.
Was responsible for clearing benches and setting up for explosive shots so all personnel was clear during blasting.
Assisted in shovel moves and rerouting of high voltage cable.

Underground Directional Driller's Helper

Major Drilling

Salt Lake City, UT

07.2020 - 11.2021

Assisted driller in setting up and operating drilling rigs, hoists, and other related equipment.
Supported driller with measuring out drill pipe lengths for different depths of boreholes.
Maintained a clean work area by removing debris from the job site.
Cleaned tools and equipment before and after each shift to ensure proper functioning of machinery.
Observed all safety protocols while working with heavy machinery.
Provided support services such as fueling machines, loading and unloading material.
Drove moving equipment to transport materials and parts to excavation sites.
Organized and used drilling equipment and hand tools.
Monitored drilling fluid statuses and alarms to maintain operational efficiency.
Mobilized and demobilized rural and remote drilling worksites under tight timelines.
Removed core samples from holes at specified depths during sampling operations.
Completed successful jackleg drilling, scaling and ground control work.

Haul Truck Operator

Navajo Transitional Energy Company

Gillette, WY

01.2020 - 04.2020

Inspected trucks and trailers before and after trips and completed basic maintenance for optimal performance.
Drove trucks with capacities greater than three tons, including tractor-trailer combinations, to transport and deliver products, livestock or other materials.
Inspected vehicle prior to and after completing each shift, noting any damage or issues in detailed logs.
Consulted with supervisors and dispatch personnel to assess situations, determine appropriate solutions and make decisions.
Observed all driving regulations and safety procedures, maintaining 100% safe driving record.
Demonstrated safe driving by observing all road rules, exercising caution in unfamiliar areas and maintaining vehicle control.
Placed blocks and scotches to prevent shifting and movement.

Journeyman Pipefitter/Carpenter Journeyperson

Loenbro - Comprehensive Pipeline Solutions

Casper, WY

01.2017 - 09.2019

Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
Read and interpreted specifications, diagrams and blueprints for the job.
Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
Observed safe work rules, including fall protection and PPE.
Threaded pipes using specified machinery.
Carefully inspected worksites to determine presence of any obstructions, unsafe conditions and crew errors.
Filled piping systems with water and air to test for leaks.
Verified and gathered new measurements to determine proper sizing of piping.
Performed rigging and forklift operations to maneuver parts and machinery.
Picked, packed, received, and restocked products with forklift, lift truck and stock picker.
Assisted in implementation of operations, maintenance and capital programs.
Implemented site safety programs in accordance with contract requirements and applicable regulations.
Assisted with clerical duties and documented daily work.
Applied changes requested by designers, owners or inspectors to optimize work.
Painted walls, exteriors and interiors of buildings and furniture using brushes, rollers and spray guns.
Extensively trained in plumbing, carpentry, painting, plastering, machine servicing and installation.
Completed indoor and outdoor residential and commercial construction projects.
Planned work and determined appropriate tools and equipment.
Continually cleaned work areas and equipment.
Assisted in caulking pipe joints to properly seal each one.
Verified that machine setups conformed to specs.
Worked overtime, including evenings and weekends, to respond to emergencies and fix unsafe conditions.
Removed debris and other duties as assigned by the manager.

Heavy Equipment Operator

Brahma Group

Salt Lake City, UT

04.2016 - 07.2016

Located and marked underground services such as pipes and wires to determine accurate digging locations.
Maintained proficiency in different types of equipment and related attachments to meet job site requirements.
Protected equipment and personnel from safety concerns by noting and avoiding potential hazards like utility lines.
Inspected, repaired and maintained equipment for durability and optimal performance.
Kept equipment properly fueled and ready for immediate use to support scheduling demands.
Completed jobs operating equipment on regular basis with advanced skill.
Followed signals from ground crew and other operators to prevent dangerous interactions or missed cues for proper materials movement.
Used front end loader's levers to move and tilt the bucket and drive it into different materials.
Employed best heavy equipment operation safety practices with minimal complaints or incidents.
Followed the company's strict safety protocols for machinery operation and encouraged other employees to do the same.
Helped construction personnel with specific job tasks.
Communicated with Coordinator via handheld mobile devices to coordinate job site resources.
Performed grading and shaping land for building and finishing purposes.
Operated construction equipment, including excavators to properly grade land.
Confirmed that all safety protocols were adhered to and that team members followed such measures to avoid accidents and injuries.
Followed company policies by performing thorough equipment inspections prior to and after each shift.
Ensured that each trench had been properly graded according to specifications.
Transported materials around construction sites to work locations.
Created holes and trenches in the ground.
Removed tools and machinery from job site and secured location at end of shift.
Followed company policies by performing pre-shift and post-shift equipment inspections and completing all reports accurately.

Journeyman Carpenter

Big D Construction

Salt Lake City, UT

03.2016 - 04.2016

Laid concrete, built batter boards, used excavators and placed reinforced steel accurately for projects.
Removed tool marks and surface adhesives after installation to improve project quality.
Shaped materials to exact measurements for job requirements using hand tools and power equipment.
Cut timber, panels and other wooden materials according to measured dimensions.
Promoted team safety by keeping work areas free of hazards.
Anchored and braced forms and other structures in place to complete precise joining and high-quality work.
Identified and requested any and all PPE necessary to perform tasks.
Consistently constructed square and level projects.
Safely used band, circular, jig, reciprocating, chop and compound miter saws.
Operated terrain telescoping forklift, backhoe, skid steer and tractor.
Secured all required permit approvals prior to starting projects.

Laborer

Ever Green Caissions

Commerce City, CO

08.2013 - 12.2015

Trained in plumbing, carpentry, painting, plastering, machine servicing and installation.
Measured, cut and laid out materials based on individual job requirements.
Cut materials into specified sizes for installation using tile cutters and power saws.
Retrieved materials, tools and equipment from trucks and delivered to skilled workers.
Signaled equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials.
Built temporary structures to hold back slopes or allow skilled workers to reach greater heights and complete job tasks.
Read and understood specifications, drawings and blueprints to complete accurate, high-quality work.
Secured required permits and arranged supplies for each project.
Loaded and unloaded vehicles with supplies needed on job sites and kept accurate daily counts of all materials used.
Monitored team member work and assisted with accomplishing objectives.
Attended all safety trainings offered by employer to improve overall knowledge of safety measures and recognize areas requiring improvement.
Protected crew and general public by keeping traffic away from dangerous locations.
Supplied tools and equipment to workers.
Used organizational skills to meet productivity requirements.
Used picks and shovels to dig, spread and level dirt and gravel.
Prepared sites for concrete work by breaking up damaged concrete and leveling or contouring ground.
Removed waste and trash from job sites before, during and after shift completion to keep work areas clean and organized.
Communicated with team members to coordinate efficient, safe work and meet job schedules.
Erected and dismantled temporary bracing, shoring and scaffolding to support crew needs.
Operated fork truck safely by following all procedures with care.
Performed heavy labor such as ditch digging, paving and hauling.
Used trowels of various sizes and shapes to level and clear away excess concrete.
Monitored and supported site safety initiatives to protect team members and prevent accidents.
Collected and removed debris from work sites to maintain team productivity and minimize safety hazards.
Coordinated communication between equipment operators by using two-way radios and hand signals.

Summary

Overview

Work History

Haul Truck Operator/Pit Utility

Underground Directional Driller's Helper

Haul Truck Operator

Journeyman Pipefitter/Carpenter Journeyperson

Heavy Equipment Operator

Journeyman Carpenter

Laborer

Education

High School Diploma -

Skills

Work Availability

Timeline

Similar Profiles

Colin BladeColin Blade

Shawn DavidShawn David

Hunter CanoHunter Cano