Summary
Overview
Work History
Education
Skills
Certification
Timeline
Generic

Gorge Aguilar

Spring,Texas

Summary

Commissioning/Startup professional dedicated to developing and implementing the commissioning process within the industrial industry. Create and implement commissioning plans, construction checklists, site acceptance test procedures and integrate system test procedures. Conduct onsite quality control inspection using documents created for site specific requirements. Work with client, engineering, construction, operations to insure the client project requirements are met and the clients expectations are exceeded.

Overview

4
4
years of professional experience
1
1
Certification

Work History

Electrical Technician/Tester

Mmr Procom
04.2024 - 06.2025
  • Switchgear testing 480v ( bus/breaker megg, ductor, CT/PT testing, troubleshoot input/output to feeder protection relays and beckwith main tie main, assist relay technician on primary/secondary injection)
  • Switchgear testing 4.16kv- 13.8kv(bus/breaker megg, ductor breakers in and out, vlf, timing test for breaker, CT/PT testing, troubleshoot input/output to feeder/motor protection relays and beckwith main tie main, assist relay technician on primary and secondary injection)
  • Transformer testing( PI megg, transformer turns ratio, winding resistance, and power factor, send alarms back to erk/ feeder protection relays)
  • 480 MCC testing( megg/dutor bus/breakers open and closed, troubleshoot overload, verify hand off auto function, assist dcs, uncoupled motor runs)
  • 4160 MCC testing( megg, ductor, vlf bus, disconnect, contactor, fusses, megg surge arrestors, troubleshoot input/output to motor protection relay, assist relay technician, verify signal from ems, assist dcs, uncoupled motor runs)

Electrical Supervisor

Etec Industrial Services, LLC
02.2024 - 04.2024
  • Improved project efficiency by effectively managing electrical installation and maintenance tasks.
  • Reduced downtime in production facilities by promptly addressing and resolving electrical issues.
  • Enhanced safety compliance by conducting thorough inspections of electrical systems and equipment.
  • Streamlined workflow with proper scheduling, allocation, and supervision of electrical teams.
  • Collaborated with other supervisors for coordinating cross-functional work activities, promoting a smooth project execution.
  • Ensured adherence to quality standards by closely monitoring the workmanship of electricians on site.
  • Established strong relationships with clients, resulting in repeat business opportunities and positive referrals.
  • Facilitated clear communication between management, clients, and staff members to ensure alignment on project objectives.

Electrical Commissioning/Startup Technician

Etec Industrial Services, LLC
07.2023 - 02.2024
  • Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
  • Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
  • Conferred with engineers and designers to investigate and solve failure issues.
  • Evaluated finished assemblies for compliance with standard procedures and design requirements.
  • Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
  • Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
  • Worked to create safe, low-cost and dependable designs.
  • Interpreted scale drawings of new commissions to determine layout of materials and equipment.
  • Reviewed existing electrical engineering criteria to identify necessary revisions, deletions or amendments to outdated material.

Electrical Tester (VLF)

Etec Industrial Services, LLC
05.2023 - 07.2023
  • Inspected and tested electrical systems to identify connection issues and other faults affecting system performance.
  • Examined products for imperfections and defects.
  • Followed standard operating procedures for inspections and tests.
  • Recorded inspection and test results on data sheets.

Electrical Commissioning/Startup Technician

Etec Industrial Services, LLC
09.2022 - 05.2023
  • Tested wiring and other system parts for electrical flow and function.
  • Tested, troubleshot, and calibrated equipment in shop and field.
  • Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
  • Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
  • Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
  • Inspected equipment for defects and safety hazards and completed necessary repairs.
  • Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
  • Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
  • Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
  • Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
  • Disconnected and removed motors and pumps.
  • Operated and maintained electronic transmitting and receiving equipment.
  • Collaborated with IT department to resolve networking issues.
  • Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
  • Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
  • Conferred with engineers and designers to investigate and solve failure issues.
  • Interpreted scale drawings of new commissions to determine layout of materials and equipment.
  • Worked to create safe, low-cost and dependable designs.
  • Interpreted test information to resolve design-related problems.
  • Evaluated finished assemblies for compliance with standard procedures and design requirements.
  • Created, aligned, and optimized electrical instrumentation and testing equipment.
  • Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
  • Reviewed existing electrical engineering criteria to identify necessary revisions, deletions or amendments to outdated material.
  • Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
  • Plotted equipment response time and fault range information on graph to determine relay curves.

Electrical Technician Heat Trace

Mmr Procom
05.2022 - 09.2022
  • Tested wiring and other system parts for electrical flow and function.
  • Tested, troubleshot, and calibrated equipment in shop and field.
  • Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
  • Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
  • Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
  • Inspected equipment for defects and safety hazards and completed necessary repairs.
  • Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
  • Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
  • Disconnected and removed motors and pumps.
  • Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
  • Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
  • Conferred with engineers and designers to investigate and solve failure issues.
  • Interpreted scale drawings of new commissions to determine layout of materials and equipment.
  • Interpreted test information to resolve design-related problems.
  • Evaluated finished assemblies for compliance with standard procedures and design requirements.
  • Created, aligned, and optimized electrical instrumentation and testing equipment.
  • Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
  • Reviewed existing electrical engineering criteria to identify necessary revisions, deletions or amendments to outdated material.
  • Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
  • Updated hardware and software platforms by implementing automation and efficiency improvements.
  • Used surveying equipment to grade and measure land profiles before installation of electrical systems.
  • Created Type diagrams, drawings and specifications for prototypes, production products and testing procedures.
  • Plotted equipment response time and fault range information on graph to determine relay curves.

Electrical Commissioning Technician

S&B Contractors And Engineers
03.2022 - 05.2022
  • Installed electrical conduit and wiring for power, controls, and lighting.
  • Tested wiring and other system parts for electrical flow and function.
  • Installed electrical wiring through conduits and holes in both flooring and walls.
  • Tested, troubleshot, and calibrated equipment in shop and field.
  • Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
  • Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
  • Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
  • Inspected equipment for defects and safety hazards and completed necessary repairs.
  • Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
  • Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
  • Disconnected and removed motors and pumps.
  • Operated and maintained electronic transmitting and receiving equipment.
  • Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
  • Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
  • Conferred with engineers and designers to investigate and solve failure issues.
  • Interpreted scale drawings of new commissions to determine layout of materials and equipment.
  • Worked to create safe, low-cost and dependable designs.
  • Interpreted test information to resolve design-related problems.
  • Evaluated finished assemblies for compliance with standard procedures and design requirements.
  • Created, aligned, and optimized electrical instrumentation and testing equipment.
  • Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
  • Reviewed existing electrical engineering criteria to identify necessary revisions, deletions or amendments to outdated material.
  • Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
  • Used surveying equipment to grade and measure land profiles before installation of electrical systems.
  • Created Type diagrams, drawings and specifications for prototypes, production products and testing procedures.
  • Plotted equipment response time and fault range information on graph to determine relay curves.

Electrical Commissioning/Startup Technician

Etec Industrial Services, LLC
07.2021 - 02.2022
  • Tested wiring and other system parts for electrical flow and function.
  • Tested, troubleshot, and calibrated equipment in shop and field.
  • Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
  • Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
  • Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
  • Inspected equipment for defects and safety hazards and completed necessary repairs.
  • Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
  • Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
  • Disconnected and removed motors and pumps.
  • Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
  • Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
  • Conferred with engineers and designers to investigate and solve failure issues.
  • Interpreted scale drawings of new commissions to determine layout of materials and equipment.
  • Evaluated finished assemblies for compliance with standard procedures and design requirements.
  • Created, aligned, and optimized electrical instrumentation and testing equipment.
  • Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
  • Reviewed existing electrical engineering criteria to identify necessary revisions, deletions or amendments to outdated material.
  • Estimated numerical length of runs during new service installations.
  • Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
  • Devised and implemented updates and resolutions for handling risks, maintaining compliance and improving designs.
  • Used surveying equipment to grade and measure land profiles before installation of electrical systems.
  • Created Type diagrams, drawings and specifications for prototypes, production products and testing procedures.
  • Analyzed interruption reports and outage databases to identify outage trends and determine needed coordination changes.
  • Plotted equipment response time and fault range information on graph to determine relay curves.

Electrical Technician

Etec Industrial Services, LLC
03.2021 - 07.2021
  • Installed electrical conduit and wiring for power, controls, and lighting.
  • Tested wiring and other system parts for electrical flow and function.
  • Installed electrical wiring through conduits and holes in both flooring and walls.
  • Tested, troubleshot, and calibrated equipment in shop and field.
  • Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
  • Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
  • Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
  • Inspected equipment for defects and safety hazards and completed necessary repairs.
  • Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
  • Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
  • Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
  • Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
  • Disconnected and removed motors and pumps.
  • Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
  • Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
  • Conferred with engineers and designers to investigate and solve failure issues.
  • Worked to create safe, low-cost and dependable designs.
  • Interpreted test information to resolve design-related problems.
  • Evaluated finished assemblies for compliance with standard procedures and design requirements.
  • Created, aligned, and optimized electrical instrumentation and testing equipment.
  • Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
  • Reviewed existing electrical engineering criteria to identify necessary revisions, deletions or amendments to outdated material.
  • Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
  • Used surveying equipment to grade and measure land profiles before installation of electrical systems.
  • Plotted equipment response time and fault range information on graph to determine relay curves.

Education

High School Diploma -

North Shore High School

Skills

  • 480v-138kv switchgear testing
  • 416kv- 480v transformer testing
  • 480v/416kv mcc testing
  • Starting switchgear testing for compressors
  • Troubleshooting electrical components

Certification

NCCER PLUS # 14191271

ELECTRICAL LICENSE # 322135

Timeline

Electrical Technician/Tester

Mmr Procom
04.2024 - 06.2025

Electrical Supervisor

Etec Industrial Services, LLC
02.2024 - 04.2024

Electrical Commissioning/Startup Technician

Etec Industrial Services, LLC
07.2023 - 02.2024

Electrical Tester (VLF)

Etec Industrial Services, LLC
05.2023 - 07.2023

Electrical Commissioning/Startup Technician

Etec Industrial Services, LLC
09.2022 - 05.2023

Electrical Technician Heat Trace

Mmr Procom
05.2022 - 09.2022

Electrical Commissioning Technician

S&B Contractors And Engineers
03.2022 - 05.2022

Electrical Commissioning/Startup Technician

Etec Industrial Services, LLC
07.2021 - 02.2022

Electrical Technician

Etec Industrial Services, LLC
03.2021 - 07.2021

High School Diploma -

North Shore High School

Similar Profiles

CREATE PROFILE
Gorge Aguilar