Jaime Roncallo
Davenport,Florida
Summary
Ø Provides daily operations support and maintenance activities for identified equipment inventory. Ensures diagnostic/therapeutic or electronics equipment meets manufacturer’s specifications for safe and proper use by the performance of routine safety inspections, scheduled maintenance (SM), calibrations, repairs, updates, etc. of assigned equipment. Highly skilled in providing troubleshooting and repair solutions to equipment hardware and software issues. Provides monitoring, ticketing, notification, problem analysis, tracking, and resolution of problems.
Overview
14
14
years of professional experience
1
1
Certification
Work History
Field Service Engineer
Control Micro Systems
Winter Park, FL
07.2022 - 08.2022
- Performed onsite installation, modification and maintenance of systems and equipment.
- Scheduled service calls according to customer location and urgency of need.
- Provided technical support to troubleshoot, repair and maintain operational efficiencies in hydraulic, mechanical and electrical systems.
- Inspected equipment and processes to reduce maintenance-related downtime incidents and mitigate equipment failures.
Field Service Technician
General Dynamics, Technology & Prime Technical Service
Orlando, FL.
03.2022 - 05.2022
- Assemble and test serves, consoles, and miscellaneous electro-mechanical hardware to build specifications
- Lay, build, and label fiber an LAN Cables to build specifications
- Professionally field dress and label server cabinets and consoles
- Assess hardware and software malfunctions by means of diagnostic tools and customer inputs
- Disassemble and reassemble machines to repair or replace worn or malfunctioning components and consumables
- Update and maintain assigned machines per specifications
- Comply With GDIT Processes and contribute to lean six sigma initiatives as part of our continuous process improvement programs.
Biomedical Technician
Insight Global Advent Health
Waterman Tavares, FL
09.2021 - 02.2022
- Perform performance assurance (PA) inspections, scheduled maintenance, electrical safety inspections (ESI), and operation verification procedures (OVP) on general biomedical equipment
- Repair, install, and calibrate general biomedical equipment
- Majority of work centered around replacing and testing infusion pumps for the hospital
- Document preventative maintenance
- Inform supervisors of the status of repairs, scheduled inspections, unusual equipment situations, and any customer concerns
- Work with, direct, and document the activities of subcontractors, vendors, and outside service technicians to ensure proper service delivery
- Maintain biomedical expertise through ongoing training and education
- Assist with Service Operations Special Projects as assigned On-Call rotation and flexible work time
- Discuss equipment status and functionality with clinicians
- Example: IV plum 360, bear hugger, Warming Compartment Cabinets, Philips VS3, VS4, VS8 Defrillators, Audio Station, Bed
Electronics Technician
Invivo & Philips Nextgen Service Inc
Gainesville, FL
08.2020 - 09.2021
- Services, Repair, Troubleshoot, Installed, Soldering, all Type of Medical Imaging Devices and Equipment
- Comply with all applicable SOP's and maintain compliance with {FDA, OSHA, GMP, ISO, GDP,} company Standard procedures etc
- Perform decontamination of returned instruments for repair
- Manage and is accountable for parts and other company assets assigned
Field Service Technician
Orange County Supervisor of Election
Orlando, FL
03.2020 - 03.2020
- Administer County State and Federal Elections
- Provide Assistance and Support for municipal elections
- Service Repair and Troubleshoot DS200, Express Vote, Laptop
- Maintained customer satisfaction through effective business judgment and decision
- Tech Support and Upgrade Software
- Maintain election equipment and supplies
Field service Technician
CSA Service Solution
Orlando, Florida
06.2019 - 08.2019
- Service, Repair and upgrade Software for Sure-Signs VSV Monitors VS3,VS4,VS8
- Professional experienced in a variety of electrical and mechanical work
- Experience with reading blueprints, assembly drawings, and wiring schematics
Assembler Technician
JBT Corporation
Orlando, Florida
11.2018 - 12.2018
- Performs all assembly and disassembly operations to modify, repair, rework, retro-fit, upgrade and assemble cables, mechanical, electronic, microelectronic and subassemblies from operation instruction sheets, blue prints, process sheets, samples, assembly drawings, wiring diagrams and schematics in the manufacture of new and customer returned products
- Professional experienced in a variety of electrical and mechanical work
- Installed, Repair and Tested Automated Robotics Systems on Conveyor Belt
Warehouse Technician
CD Staffing
Lakeland, Florida
03.2017 - 12.2018
- Customer service warehouse work, forklift driver – pass the product to the machine which checks for damages and deals with the packaging
- I was also responsible, to manage as to where it has to be distributed (Walmart, Amazon)
Engineer Tech
Siemens Healthcare Diagnostic Corporation
Tarrytown, NY
03.2013 - 10.2016
- Professional experienced in a variety of electrical and mechanical work
- Performs basic task and functions for professional field service Engineer work
- On-site technical and operational support in the design, development, installation and maintenance, repaired, Troubleshot, and calibrated bio-medical diagnostics equipment
- Example Centaur, CP, XP, XPT
- Experience with reading blueprints, assembly drawings, and wiring schematics
- Tested and Repair Misalignment on all Skew Conveyor Belt parts
IT Field service Engineer
Xoran’s Technologies Corporation
Ann Arbor, MI
01.2012 - 09.2012
- Professional experienced in a variety of electrical and mechanical work
- Provide on-site Installation maintenance, service and Technical Support
- Products systems at various customer locations
- Primary CSE geography in the U.S occasional international travel required
- Provide Customer support on-site and by phone including training troubleshooting service and quality assurance
- Comply with all applicable SOP's and maintain compliance with FDA and ISO
- Experience with reading blueprints, assembly drawings, and wiring schematics
Engineer Technician
ITC Nexus DX & Thoracic Corporation
Edison, NJ.
11.2010 - 01.2012
- Professional experienced in a variety of electrical and mechanical work
- Perform incoming inspections of instruments electrical components and sub-assemblies Adhere to all relevant regulations, policies and procedures including occupational Safety and health administration {OSHA, GMP, ISO, GDP, SOP} company Standard procedures
- Solder SMT & through-hole on all Component Part liked PC-Board’s IC-ship Capacitors, Resistor, Diode
- Experience with reading blueprints, assembly drawings, and wiring schematics
Mechanical Engineer Technician
Stryker Orthopedics Corporation
Mahwah, NJ.
10.2009 - 11.2010
- Repair and service Facilities Maintenance mechanical equipment
- Installed and repaired microcomputer hardware and peripheral components such as monitors, keyboards, automation PLC, printer and disk drives
- Clean and Maintained production equipment in the clean room
- Provided Technical troubleshooting and support for newly assembled equipment
- Experience with reading blueprints, assembly drawings, and wiring schematics
- Troubleshot Misalignment on electro-mechanical Conveyor Belt
Production Engineer
FARE Collection Corporation
Somerset, NJ
02.2008 - 10.2009
- Professional experienced in a variety of electrical and mechanical work
- Provided technical troubleshooting and support for newly assembled ticket vending machines
- (TVM's) Installed and repaired microcomputer hardware and peripheral components such as monitors, keyboards, automation PLC, printer and disk drives
- Tested all components of (TVM's) and performed required corrective action, as needed
- Acted independently to determine methods and procedures on all assignments
- Managed and replenished parts inventory
- Experience with reading blueprints, assembly drawings, and wiring schematics
Field Service Engineer
Baxter Healthcare Corporation
Chicago, IL
02.2006 - 01.2008
- Professional experienced in a variety of electrical and mechanical work
- Repair, upgraded and tested Colleague brand infusion Pumps and Tina Kidney dialysis equipment
- Analyzed and performed needed repairs on Baxter dialysis machines and infusion pumps to address customer reported issues and those during inspections
- Cleaned and maintained production equipment in clean room
- Maintained required documentation in accordance with FDA guidelines
- Adhered to environmental, health safety Sop's and good documentation procedures
- Experience with reading blueprints, assembly drawings, and wiring schematics
- Page 5
Education
Bachelor/Associate of Science Degree - Computer of Science Laboratory Electrical & Electronics Engineering Technology
Rutgers /Rets University Institute of Technology
Piscataway, NJ07.1994
BBA - Network And System Administration
Target Training Center INC
New Jersey10.2002
Skills
- Equipment Reassembly
- System Modification
- Service Records
- Computer Hardware Repair
- Corporate Procedures
- Current Good Manufacturing Practices (CGMP)
- System Performance Evaluation
- Technical Support and Assistance
- Administrative Operations
- Instrumentation Maintenance
- Lean Manufacturing Principles
- Corrective Actions
- PCA Pumps
- Information Documentation
- Policies and Procedures
- Installations and Repairs
- Documenting Service Tickets
- UNIX and Linux-based tools
- Diagnostics and troubleshooting
- Policies and Procedures
- Biomedical Engineering
- Documenting Service Tickets
Certification
AAMI/AMMI: Association for Advancement of Medical Instrumentation, Institute of Electrical and Electronics
BMET/CBET: IT Bio-medical Electrical Technology / Bio-medical Equipment Technician/Engineer
IEEE: Institute of Electrical and Electronics Engineers
IEC: International Electro-Mechanical Technical Commission, standards organization
GMP: Good Documentation Practices
ISO: International Organization for Standardization
Mini-Cat CT scanner ENT Specialists Certified
Timeline
Field Service Engineer
Control Micro Systems
07.2022 - 08.2022
Field Service Technician
General Dynamics, Technology & Prime Technical Service
03.2022 - 05.2022
Biomedical Technician
Insight Global Advent Health
09.2021 - 02.2022
Electronics Technician
Invivo & Philips Nextgen Service Inc
08.2020 - 09.2021
Field Service Technician
Orange County Supervisor of Election
03.2020 - 03.2020
Field service Technician
CSA Service Solution
06.2019 - 08.2019
Assembler Technician
JBT Corporation
11.2018 - 12.2018
Warehouse Technician
CD Staffing
03.2017 - 12.2018
Engineer Tech
Siemens Healthcare Diagnostic Corporation
03.2013 - 10.2016
IT Field service Engineer
Xoran’s Technologies Corporation
01.2012 - 09.2012
Engineer Technician
ITC Nexus DX & Thoracic Corporation
11.2010 - 01.2012
Mechanical Engineer Technician
Stryker Orthopedics Corporation
10.2009 - 11.2010
Production Engineer
FARE Collection Corporation
02.2008 - 10.2009
Field Service Engineer
Baxter Healthcare Corporation
02.2006 - 01.2008
Bachelor/Associate of Science Degree - Computer of Science Laboratory Electrical & Electronics Engineering Technology
Rutgers /Rets University Institute of Technology
BBA - Network And System Administration
Target Training Center INC
AAMI/AMMI: Association for Advancement of Medical Instrumentation, Institute of Electrical and Electronics
BMET/CBET: IT Bio-medical Electrical Technology / Bio-medical Equipment Technician/Engineer
IEEE: Institute of Electrical and Electronics Engineers
IEC: International Electro-Mechanical Technical Commission, standards organization
GMP: Good Documentation Practices
ISO: International Organization for Standardization
Mini-Cat CT scanner ENT Specialists Certified
Similar Profiles
Robert RamirezRobert Ramirez
Mechanical Assembler at Control Micro SystemsMechanical Assembler at Control Micro Systems
HARSH THAPAHARSH THAPA
BMS Operator at Universe Micro SystemsBMS Operator at Universe Micro Systems
Ari WarrenAri Warren
Senior Engineer - Battery Modeling at Micro Systems Engineering Inc.Senior Engineer - Battery Modeling at Micro Systems Engineering Inc.