Johnny Ramos
Fate
Overview
14
14
years of professional experience
1
1
Certification
Work History
Superintendent
Cummings Electrical
Fort Worth
02.2011 - 04.2025
- Evaluated and recommended new procedures to upgrade and refine existing programs.
- Negotiated contracts with vendors and suppliers to secure favorable terms.
- Coordinated material procurement processes with suppliers while ensuring timely delivery of materials at job sites.
- Supervised staff including subcontractors and laborers on assigned projects.
- Obtained specifications and directed work for construction crews.
- Developed strategies for cost control, scheduling, quality assurance and problem solving.
- Recognized and enforced quality standards through daily inspection of construction sites.
- Recommended improvement in work methods and techniques to correct maintenance deficiencies.
- Oversaw complete construction process to maximize quality, cost controls and efficiency.
- Monitored project progress to enforce adherence to deadlines and quality standards.
- Provided technical advice for resolving design problems and construction issues.
- Conducted regular meetings with contractors, subcontractors, laborers to review progress and address any issues, concerns.
- Maintained accurate records such as daily logs, time sheets, inspection reports, for each project.
- Resolved conflicts between contractors or between contractor and client efficiently and professionally.
- Created work crew schedules and delegated assignments.
- Oversaw daily work of team using knowledge of local and national building codes for construction areas.
- Negotiated changes or modifications in contracts as needed during the course of a project.
Journeyman Electrician
Cummings Electrical
Fort Worth
02.2011 - 04.2025
- Updated outdated wiring systems with newer technologies.
- Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
- Verified measurements and made accurate cuts to avoid wasting materials on job sites.
- Adhered to local building codes when installing new electrical systems.
- Fabricated parts according to specifications using hand and power tools.
- Planned layout and installation of wiring and fixtures based on project specifications and building codes.
- Performed rough-in, termination, and underground work.
- Installed motor feeders and made standard motor connections.
- Addressed and resolved worksite safety hazards to reduce risk.
- Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
- Performed troubleshooting and diagnosis on malfunctioning systems or components.
- Performed maintenance on existing electrical wiring and equipment.
- Advised management on issues of safety in continued equipment operation.
- Installed leads and connected cables to motors, apparatus and equipment.
- Maintained records of work performed for future reference purposes.
- Provided emergency services during outages or natural disasters.
- Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
- Kept work areas clean, neat and free of hazards.
- Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
- Conducted tests on electrical components, circuits, and systems to ensure compliance with safety standards.
- Dug trenches and created holes to pull conduit and install supports.
- Troubleshot issues and developed effective solutions.
- Connected wires to circuit breakers, transformers or other components to form circuits.
- Instructed apprentices on proper installation techniques for various electrical components.
- Inspected completed installations for conformance to codes and regulations.
- Replaced faulty switches, outlets, circuit breakers when necessary.
- Diagnosed malfunctioning wiring using test equipment to locate faults.
- Installed electrical systems in residential and commercial buildings according to plans and specifications.
- Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
- Assisted journeyman electricians in troubleshooting complex problems.
- Traced and diagnosed electrical malfunctions using hand tools and test equipment.
- Identified system malfunctions and performed repairs as needed.
- Installed conduit systems, various lighting systems, and basic control systems.
- Assisted with new installation and upgrades of plant equipment.
- Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
- Read blueprints or schematic diagrams to determine the layout of a particular job site.
- Installed and maintained breaker panels for commercial and residential buildings.
- Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
- Pulled insulated wires or cables through conduits to complete circuits.
- Reviewed diagrams and relevant codes to complete tasks safely and accurately.
- Planned new installations by studying drawings, technical manuals, and other documents.
- Trained workers to install, maintain and repair electrical equipment and fixtures.
- Resolved customer complaints through effective problem-solving techniques.
- Built controllers and panels to complete system installations.
- Dismantled electrical components using hand tools to disconnect and restore wiring connections.
- Worked with contractors regarding project timelines and budgets.
- Led teams and delegated tasks to install, maintain, or repair electrical systems and wiring.
- Replaced malfunctioning components for failing electrical setups.
- Ensured all safety procedures were followed while working with live wires.
- Tested continuity of circuits using testing devices such as ohmmeters, voltmeters, ammeters.
- Completed semi-skilled and skilled work under supervision of fully qualified professionals.
- Collaborated with architects on electrical systems design for new construction.
- Followed established safety practices when using tools and equipment.
- Reviewed existing electrical systems for maintenance, repair and update requirements.
- Led team of apprentice electricians in installing electrical systems and inspecting existing circuits.
- Reviewed blueprints to determine electrical component and wiring locations.
- Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
- Constructed and installed electrical wiring and electronic components and maintained equipment.
- Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
- Corrected issues and installed new fixtures, wiring, circuits and motors.
- Assembled and installed physical structures, electrical wiring, and electronic components.
- Achieved cost-savings by developing functional solutions to problems.
- Completed routine maintenance and repair.
- Worked with cross-functional teams to achieve goals.
- Utilized various software and tools to streamline processes and optimize performance.
- Collaborated closely with team members to achieve project objectives and meet deadlines.
- Exceeded customer satisfaction by finding creative solutions to problems.
- Provided support and guidance to colleagues to maintain a collaborative work environment.
- Operated a variety of machinery and tools safely and efficiently.
- Recognized by management for providing exceptional customer service.
- Operated equipment and machinery according to safety guidelines.
- Provided excellent service and attention to customers when face-to-face or through phone conversations.
- Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
Low Voltage Technician
Cummings Electrical
Fort Worth
02.2011 - 04.2025
- Kept detailed inventory records of parts and materials and took note of potential shortages or problems.
- Evaluated engineering proposals and drawings to assess feasibility and conformance with sound electrical engineering practices and safety standards.
- Leveraged outstanding communication, interpersonal and people skills to work well with clients.
- Conducted statistical studies to analyze or compare production costs for sustainable or nonsustainable designs.
- Monitored performance of installed systems in order to ensure optimal operation.
- Calculated design specifications or cost, material and resource estimates.
- Maintained accurate records of all maintenance activities performed at each job site.
- Adhered strictly to safety regulations when working around hazardous materials.
- Configured network switches, routers and wireless access points.
- Updated firmware on various devices such as DVRs and IP cameras.
- Collaborated with other tradespeople on multi-disciplinary projects involving low voltage systems.
- Repaired damaged wires or cable assemblies within a variety of electrical enclosures.
- Performed diagnostics and testing to locate root causes and resolve issues for optimal performance.
- Built, calibrated and maintained electrical instruments used in design development processes.
- Developed test plans and documented results prior to system installation or repair work.
- Tested performance of in-development parts, assemblies and systems under simulated operating conditions to optimize plans.
- Improved electrical installations by standardizing procedures for production and field personnel.
- Constructed and evaluated electrical components for consumer electronics applications.
- Strategized alternative uses for current electronics designs to reduce energy usage.
- Set up and operated specialized or standard test equipment to diagnose, test or analyze performance of electronic components, assemblies or systems.
- Scheduled routine system inspections and preventive maintenance.
- Conducted site surveys to determine customer requirements.
- Provided technical support to customers regarding their low voltage systems.
- Supervised work teams and oversaw multiple security system assignments each shift.
- Installed conduit piping, junction boxes and other related components for data cabling installations.
- Calibrated instruments used in testing low voltage systems.
- Provided exceptional oversight and supervision to new hires and showed each how to properly install low voltage wiring systems.
- Set up and performed routine maintenance on fire alarm, security and closed circuit TV systems for various clients.
- Conducted diagnostic tests to assess wire, part and system malfunctions.
- Maintained detailed logs of installation, repair and updating services.
- Provided estimates to clients and supervisors detailing costs, time and materials needed.
- Tested circuitry and electronic components according to engineering instructions, technical manuals or knowledge of electronics.
- Assembled and tested components, wiring and systems, locating and correcting faults to optimize production results.
- Completed daily reports on tasks performed during service visits.
- Created wiring diagrams for new installations or modifications to existing systems.
- Performed termination of cables including Cat5E, Cat6 and coaxial cables for various systems.
- Maintained system logs or manuals to document testing or operation of equipment.
- Installed, tested and maintained low voltage systems such as fire alarms, CCTV, access control and audio and visual equipment.
- Inspected equipment for signs of wear or damage before performing maintenance services.
- Resolved complex technical issues with minimal supervision from senior technicians.
- Assessed project blueprints and drawings to assess project scope and required materials.
- Performed preventive, predictive and corrective maintenance to keep machinery running at optimal levels.
- Authored clear and detailed engineering specifications to clarify design details and functional criteria of each unit.
- Assembled electrical systems or prototypes using hand tools or measuring instruments.
- Troubleshot electrical circuits in order to identify the root cause of system malfunctions.
- Utilized effective troubleshooting methods, removed malfunctioning components and identified wiring issues to restore systems to working order.
- Maintained updated knowledge through continuing education and advanced training.
- Assisted with customer requests and answered questions to improve satisfaction.
- Approached customers and engaged in conversation through use of effective interpersonal and people skills.
- Utilized various software and tools to streamline processes and optimize performance.
- Demonstrated strong problem-solving skills, resolving issues efficiently and effectively.
- Identified needs of customers promptly and efficiently.
Fiber Optic Technician
Cummings Electrical
Fort Worth
02.2011 - 03.2025
- Installed, set up and repaired devices and system components.
- Measured signal strength of televisions, telephones and internet connections to verify adequate performance.
- Established and modified networks and computers at businesses, schools, government buildings, medical facilities and homes.
- Utilized software applications to monitor and troubleshoot telecom devices from remote locations.
- Communicated with customers to access work areas and explain work.
- Worked with truck-mounted reels to complete large installation projects.
- Set up modems and other hardware with necessary cables.
- Inspected and tested fiber optics equipment to ensure optimal performance.
- Climbed poles and entered tunnels, buildings, trenches or manholes to accomplish various job tasks.
- Ensured that safety standards were met during installation processes.
- Provided technical support to customers regarding their fiber optic needs.
- Organized and coordinated resources required for successful completion of jobs.
- Installed outside plant fiber optics in manhole and telco boxes.
- Tracked inventory levels of tools, parts, and supplies used in job sites.
- Resolved complex problems associated with diverse telecom systems.
- Prepared detailed reports on completed projects for management review.
- Pulled lines to proper tension for safety and durability of installation work.
- Identified issues with existing cable plants using OTDRs.
- Programmed optical power meters to perform loss measurements.
- Connected wires and cables to terminals and attached and detached various kinds of hardware to wires, cables, buildings or poles.
- Assisted with the development of new technologies related to fiber optics.
- Strung cables between newly installed or existing poles and restrung cables due to damage or sagging.
- Set up service for customers by installing, connecting, testing or adjusting equipment.
- Built out new fiber runs for customer connections.
- Handled fibers for device routing, ribbon breakouts, component assemblies and custom splicing projects.
- Provided training to personnel on proper use of tools and techniques related to fiber optics.
- Documented installation records in a timely manner.
- Worked with other technicians as part of a team on large projects.
- Created drawings for outside plant construction projects.
- Conducted fusion splicing of single-mode and multi-mode fibers.
- Calibrated test equipment to verify accuracy of readings.
- Spliced cables with hand tools, epoxy or mechanical equipment.
- Laid out cabling plans and ran through buildings to desired locations.
- Monitored progress reports and documented results from each job site visit.
- Performed maintenance on fiber optic networks.
- Troubleshot and repaired fiber optic systems.
- Maintained documentation of all network changes and repairs.
- Installed, terminated, spliced and tested fiber optic cables.
- Handled multiple simultaneous deployment projects against strict deadlines.
- Updated and maintained databases with current information.
- Worked effectively in team environments to make the workplace more productive.
- Worked with cross-functional teams to achieve goals.
- Operated a variety of machinery and tools safely and efficiently.
- Exceeded customer satisfaction by finding creative solutions to problems.
- Conducted routine maintenance and repairs on mechanical systems and industrial equipment.
- Conducted testing of software and systems to ensure quality and reliability.
- Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
- Operated equipment and machinery according to safety guidelines.
Education
High School Diploma -
South Garland High School
Garland, TX04-2006
Skills
- Project management
- Construction supervision
- Contract negotiation
- Quality assurance
- Cost control
- Material procurement
- Safety compliance
- Technical problem solving
- Team leadership
- Time management
- Customer service
- Process improvement
- Procedure planning
- Interpersonal skills
- Blueprint reading
- OSHA compliance
- Site safety management
Certification
Journeyman license
BICSI Fiber License
Levington lowvoltage
Commscope lowvoltage
Languages
Spanish
Professional
Timeline
Superintendent
Cummings Electrical
02.2011 - 04.2025
Journeyman Electrician
Cummings Electrical
02.2011 - 04.2025
Low Voltage Technician
Cummings Electrical
02.2011 - 04.2025
Fiber Optic Technician
Cummings Electrical
02.2011 - 03.2025
High School Diploma -
South Garland High School