Jon Bumbarger

• Boosted safety on the property by identifying potential hazards and promptly addressing them.
• Loaded and unloaded materials onto trucks and trailers.
• Assisted in digging, trenching and backfilling trenches and foundations.
• Preventative maintenance on equipment and hand tools.
• Set JB's (junction boxes) and conduit at proper grade elevations.

• Maintained a safe working environment through adherence to safety protocols and regular site inspections.
• Inspected completed work to verify quality standards and compliance with criteria.
• Developed strong relationships with clients, subcontractors, and suppliers, fostering open communication channels for smooth project execution.
• Successfully mitigated risks associated with complex projects by conducting thorough risk assessments and implementing appropriate contingency plans.
• Set up and / or verified all 811 pre-dig forms
• Coordinated with GPRS contractors on verification of all underground lines, wires, duct banks, etc.
• Verified over head power lines voltage, MAD and made sure crews were aware of all possible dangers.
• Verified temporary grounds were installed properly on any questionable work site.
• Trained employees and verified mechanical grounding connections (CAD weld, clamp, c crimp, DMC) were correct on foundations, ground grid, etcs; substations, transmission lines, open switches etc.
• Trained employees on how to safely remove rotary head, foot and counterweights on CZM EK160, CZM EK200, CZM EK240 and IMT A180 for transport.
• Trained employees on set up of specialty drilling equipment: cluster bit (down-hole hammer), vibro casing, and progressive casing with twister.

Worked alongside team to accomplish work goals according to schedule.

• Performed job safety analysis on daily basis to mitigate risks for all workers and visitors to job sites.
• Completed final walkthroughs at job sites to close out projects.
• Achieved timely completion of projects with strict adherence to budget constraints and quality standards.
• Demonstrated strong leadership abilities in managing diverse teams to achieve common goals while fostering a positive work environment.
• Improved project efficiency by effectively delegating tasks and managing a team of skilled workers.
• Showcased exceptional adaptability when faced with unexpected project challenges, rapidly adjusting strategies and reallocating resources to maintain progress and minimize delays.
• Reviewed blueprints, specifications and drawings to fully understand project scope ahead of time.
• Collaborated with other contractors for seamless coordination of work scopes, ensuring smooth project execution from start to finish.
• Kept teams properly supplied with materials, tools, plans and supplementary assistance to meet project deadlines.
• Liaised between field engineers and trade workers align construction projects with drawings and specifications.
• Conducted thorough risk assessments before commencing projects, identifying potential challenges and developing contingency plans accordingly.
• Mentored junior team members in the development of their skills, providing guidance and support that facilitated career advancement opportunities.
• Ensured compliance with all relevant regulations and industry standards during the execution of assigned tasks, mitigating potential legal issues or penalties.
• Prepared daily time cards and assisted in preparation of estimates and scope of work statements.
• Planned each job with appropriate safety measures, addressing weight limits and fall protection.
• Optimized resource allocation for increased productivity by closely monitoring project progress and adjusting schedules as needed.
• Spearheaded training initiatives to develop workforce skills, resulting in improved performance and reduced turnover rates.
• Inspected completed work to verify quality standards and compliance with criteria.
• Investigated and reported on accidents, injuries and near-miss incidents.
• Provided feedback to workers on job performance and safety procedures.
• Trained workers in proper methods, equipment operation and safety procedures.
• Prepared and submitted reports on job progress and safety conditions to upper management.
• Administered disciplinary actions to workers violating safety regulations and company policies.
• Supervised training of new construction and extraction workers on safety practices and procedures.
• Supervised field crews to maximize quality and work efficiency.
• Scheduled subcontractors, consultants and vendors to coordinate completion of jobs and tasks.
• Assisted owners and project manager in budgeting, bidding and award of subcontractors.
• Identified and reviewed proposed change order requests.
• Coordinated with safety and oversite on all critical lift and questionable work site areas.
• Set up and / or verified all 811 pre-dig forms
• Coordinated with GPRS contractors on verification of all underground lines, wires, duct banks, etc.
• Verified over head power lines voltage, MAD and made sure crews were aware of all possible dangers.
• Verified temporary grounds were installed properly on any questionable work sites; substations, transmission lines, open switches etc.
• Trained employees and verified mechanical grounding connections (CAD weld, clamp, c crimp, DMC) were correct on foundations, ground grid, etc
• Trained employees on how to safely remove rotary head, foot and counterweights on CZM EK160, CZM EK200, CZM EK240 and IMT A180 for transport.
• Trained employees on set up of specialty drilling equipment: cluster bit (down-hole hammer), vibro casing and progressive casing with a twister.

• Improved project efficiency by streamlining communication between team members and departments.
• Conducted comprehensive quality control checks to maintain high standards of workmanship throughout each project phase.
• Increased productivity by effectively managing resources, personnel, and equipment on the jobsite.
• Ensured compliance with all relevant regulations, permits, codes, and laws throughout the duration of each project phase.
• Implemented cost-saving measures, identifying opportunities for improved efficiency in construction processes.
• Provided ongoing training opportunities for employees to enhance job skills and promote professional development.
• Collaborated closely with architects, engineers, and other professionals to ensure seamless execution of project plans.
• Developed strong relationships with subcontractors, ensuring timely delivery of materials and services.
• Served as a primary point of contact between management teams off-site and workers on the ground, ensuring seamless communication of essential project information in realtime.
• Operated various equipment:

Foundation drills;

CZM EK160, EK200

Tele-handlers;

JLG, JCB

Skidsteer;

Takeuchi TL12

• Trained operators on various equipment.
• Trained crews to build forms, set forms, rebar and concrete specifications and procedures.
• Trained employees basic welding procedures on worn tooling.
• Use of GPS grading, laser levels and transit for grading concrete reveal/ elevation, depending on blueprint specifications and correct anchor bolt orientation.
• Coordinated with upper management, scheduling of crews, project progress and any issues or change in conditions.
• Coordinated with subcontractors and oversite on scheduling of concrete placement.
• Coordinated with safety and oversite with all critical lift and questionable work site areas.
• Coordinated with crews for mobilization of equipment.
• Set up and / or verified all 811 pre-dig forms
• Coordinated with GPRS contractors on verification of all underground lines, wires, duct banks, etc.
• Verified over head power lines voltage, MAD and made sure crews were aware of all possible dangers.
• Verified grounds were installed properly on any questionable work sites; substations, transmission lines, open switches etc.
• Trained employees on set up of specialty drilling equipment: cluster bit (down-hole hammer) , vibro casing and progressive casing with a twister.

• Enhanced safety protocols for the team by providing comprehensive training on equipment operation and handling procedures.
• Implemented best practices in equipment storage and transportation to minimize damage or loss during transit or when not in use.
• Achieved high levels of customer satisfaction by maintaining open communication channels with clients during project execution.
• Trained new employees on safe equipment operations, fostering an environment of teamwork and continuous learning.
• Reduced downtime and increased productivity, diligently monitoring equipment performance and addressing issues promptly.
• Assisted in the selection process for purchasing new equipment based on project requirements, budget considerations, and long-term value assessment.
• Performed risk assessments prior to initiating work tasks involving heavy machinery or hazardous conditions to mitigate potential accidents or injuries effectively.
• Managed emergency situations calmly and professionally, prioritizing team safety while minimizing work disruptions and downtime.
• Coordinated with crews for mobilization of equipment.
• Set up and / or verified all 811 pre-dig forms
• Coordinated with GPRS contractors on verification of all underground lines, wires, duct banks, etc.
• Verified over head power lines voltage, MAD and made sure crews were aware of all possible dangers.
• Verified temporary grounds were installed properly on any questionable work sites; substations, transmission lines, open switches etc.
• Trained employees and verified mechanical grounding connections (CAD weld, clamp, c crimp, DMC) were correct on foundations, ground grid, etc
• Operated Various Equipment:

Founbation drills;

IMT A150LCA

Bayshore TR20, TR40, TR80

Watson DL80

Tele-handlers:

JLG, JCB, Caterpillar, Skytrack, and Genie 10k-20k

Excavators:

Caterpillar, John Deere, Komatsu, Kubota and

Takeuchi from Takeuchi TB140 to Caterpillar 336

Skidsteers:

Kubota, Caterpillar, Case and Takeuchi 150 hrs

• Coordinated with upper management on scheduling crew and daily progress reports
• Coordinated with subcontractors for concrete placement testing, rebar inspection, and compaction testing.
• Coordinated with crew for grading and concrete placement.
• Coordinated with crews for mobilization of various equipment.
• Trained crews on building forms, setting forms, rebar, anchor bolts and concrete specifications and procedures.
• Use of GPS grading, laser level, transit and Nikon total station for marking pins and locations of foundations and breaker pads.
• Trained employees basic welding procedures for basic repair, hard-facing worn tooling and replacing worn wear plates.
• Trained employees on specialty drilling equipment; progressive casing with a twister and vibro casing.

• Optimized inventory management, tracking spare parts usage, and ensuring adequate stock levels for uninterrupted service delivery.
• Improved equipment reliability by conducting thorough diagnostic tests and performing necessary repairs on various machinery.
• Streamlined maintenance processes with the implementation of preventative maintenance plans for all field equipment.
• Analyzed malfunctioning equipment and determined type of repairs required.
• Maintained meticulous records of all repair work that was made to machines and equipment.
• Replaced defective wiring systems, hydraulics, and braking systems to return machines to service.
• Collaborated with other mechanics to complete complex repairs, maximizing the lifespan of critical equipment.
• Documented repair histories accurately to streamline future diagnoses and improve decision-making regarding replacement versus repair options.
• Identified potential hazards during routine inspections, preventing accidents or injuries before they occurred.
• Managed multiple concurrent projects efficiently by organizing tasks according to urgency while maintaining high attention to detail.
• Implemented quality control measures by closely inspecting completed work to ensure it met or exceeded client expectations.
• Consistently met deadlines through diligent work ethic and prioritization of urgent tasks, maintaining operational efficiency in the field.
• Mentored junior mechanics to enhance their skills, improving overall team performance and capability.
• Read and interpreted technical manuals for troubleshooting and repair purposes.
• Evaluated and operated heavy equipment to determine necessary repairs and maintenance requirements.
• Performed welding, soldering and brazing to repair damaged components on mobile heavy equipment.
• Maintained safety standards while working on high-risk projects, adhering to company protocols and industry guidelines.
• Operated several mechanic trucks with use of truck cranes from 6k to 10000k.
• Promoted to Centre Region winter maintenance leader. Tasks involved preventive inspections and maintenance on various paving and concrete equipment, coordinate with shop supervisor on recommended repairs and manage a small crew with a separate shop, time management and parts ordering. Roughly 5 million dollars of equipment that produces 40-80 million dollars of revenue in Centre Region.

• Oversaw daily operations, ensuring that all tasks were completed accurately and on time.
• Developed strong team dynamics, fostering a positive work environment for all staff members.
• Mentored and trained new employees to ensure consistent service standards across the team.
• Checked incoming orders and organized new stock.
• Streamlined operations through effective employee scheduling and task delegation.