Juan Tristan
San Antonio,TX
Summary
To continue my career in the Aviation industry as an Airframe/Structure Mechanic
Overview
25
25
years of professional experience
Work History
SHEETMETAL MECHANIC
Boeing Aerospace
- Performed a variety of CNs, EQCs, and NCs on a very aggressive schedule in order to complete BCHS baseline SOW
- E.I team focal for cell #215
- Removed/Replaced sleeved, 1st or 2nd oversized fasteners
- Application of primer and sealant in EME specific areas per BAC specs
- Completed all shake pick-ups generated by Boeing Supplier Quality and Quality Assurance on both IML and OML on 47 lower section.
PRODUCTION WELDER
Toyotetsu Texas
01.2024 - 05.2024
- Run machine Robot that produces the window back panels for the Toyota Tundra and Toyota Sequoia
- Run the machine Robot that produces the parts for the dashboard and radiator for the Toyota Tundra
- Make sure Robot is running good and that all weld’s are secure and welded properly
- Change out welding tips for the Robot, make sure tips are clean
- Inspect all my work to make sure everything is to spec
- 5s my area before and after my shift.
SHEETMETAL MECHANIC
KING Aerospace
08.2023 - 11.2023
- Work as a sheetmetal mechanic modifying C-17 and C-130s for medical use and Private own.
SHEETMETAL MECHANIC
Spirit Aerospace
07.2018 - 07.2023
- Worked on the 737 fuel cell doing rework on 2nd shift
- Then went into inspection
- Inspecting 737 fuel cell tank.
SHEETMETAL MECHANIC
Triumph Aerospace
08.2017 - 06.2018
- Preformed a variety of close tolerance holes, shooting and bucking rivites common to pressure deck and center wing box and installation of seat tracks and floor beems for the Boeing 767 freighter and Tanker using control tooling and mylars per engineering.
SHEETMETAL MECHANIC
Triumph Aerospace
01.2015 - 08.2017
- Preformed a variety of close tolerance holes common to the Right and Left skin c/t the wings on the Bombadier per IOS and blue prints as well as per engineering
- Assisted on reworking over size holes per W/Ts Application of primer and sealant and Fay sealing the skins c/t the wings.
SHEETMETAL MECHANIC
Boeing Aerospace
07.2013 - 01.2015
- Performed a variety of CNs, EQCs, and NCs on a very aggressive schedule in order to complete BCHS baseline SOW
- E.I team focal for cell #295
- Helped in joining the plane
- 1st or 2nd oversized fasteners
- Application of primer and sealant in EME specific areas per BAC specs
- Completed all shake pick-ups generated by Boeing Supplier Quality and Quality Assurance on both IML and OML on 47 and 48 lower sections.
SHEETMETAL MECHANIC
Northrop Grumman Aerospace
10.2012 - 07.2013
- Assisted in joining aircarft and drilling close tolrance holes
- Performed aerodynamic sealing on aircraft
- Manufactured new aircraft sections using tooling and jigs
- Read and interpreted blue prints to perform modifications
- All repairs and modifications were per manufacturers and airlines maintenance manuals, technical orders, and other company specifications.
SHEETMETAL MECHANIC
Timco Aviation Services
03.2007 - 03.2009
- Composite repairs on interior panels
- Assisted on mating fuselage with tail cone
- Fabricated parts for main spar
- Performed corrosion control and aerodynamic sealing on aircraft
- Manufactured new and/or modified old aircraft sections using tooling and jigs
- Read and interpreted blue prints to perform modifications
- All repairs and modifications were per manufacturers and airlines maintenance manuals, technical orders, and other company specifications.
AIRFRAME MECHANIC
Empire Aero Center
05.2002 - 06.2004
- Performed maintenance and modifications per Time Compliance Technical Orders
- Performed organizational maintenance per Job Guides
- Interior work consisting of modifications and removal/replacement of interior side panels, galley, lavatory, and crew seats
- Performed heavy structural repairs and mods on DC8
- Fuel cell mods and skin changes
- Standard repairs on primary and secondary flight controls.
SHEETMETAL ASSISTANT / STRUCTURES MECHANIC
Commodore
05.1999 - 10.2002
- Repair and replacement of aerodynamic surfaces
- Removal of interior panels for corrosion
- Structural repairs and modifications on various aircraft
- Under supervision performed preventive maintenance.
Education
GED -
Portland State University
Portland, Oregon01.1994
Skills
- AIRCRAFT MAINTENANCE SKILLS
- Structure and Sheet Metal Repair (Heavy Mod Repairs)
- Performed close tolerance drilling, countersinking, riveting, cutting, and other basic structure operations
- Fabricated/ Manufactured new parts using precision tooling and jigs
- Mechanical Blueprint Reading
- Read and Interpret Schematics
- Troubleshoot Aircraft Systems
- Performed various Aircraft Inspections
- Maintain Data and Records
- Ground Handling and Towing
- Remove and Install various Electrical, Mechanical
Timeline
PRODUCTION WELDER
Toyotetsu Texas
01.2024 - 05.2024
SHEETMETAL MECHANIC
KING Aerospace
08.2023 - 11.2023
SHEETMETAL MECHANIC
Spirit Aerospace
07.2018 - 07.2023
SHEETMETAL MECHANIC
Triumph Aerospace
08.2017 - 06.2018
SHEETMETAL MECHANIC
Triumph Aerospace
01.2015 - 08.2017
SHEETMETAL MECHANIC
Boeing Aerospace
07.2013 - 01.2015
SHEETMETAL MECHANIC
Northrop Grumman Aerospace
10.2012 - 07.2013
SHEETMETAL MECHANIC
Timco Aviation Services
03.2007 - 03.2009
AIRFRAME MECHANIC
Empire Aero Center
05.2002 - 06.2004
SHEETMETAL ASSISTANT / STRUCTURES MECHANIC
Commodore
05.1999 - 10.2002
SHEETMETAL MECHANIC
Boeing Aerospace
GED -
Portland State University