Kelvin Bates

I clamp the logs coming through the gang saw and then use a foot pedal to move cut logs onto a large metal conveyor. After lunch I switch to another machine that organizes logs for the edger which cuts planks into 2x4s, 2x6s, 2x8s, etc.

• Coordinated with other departments to ensure timely completion of tasks.
• Monitored progress of work to ensure that deadlines were met.
• Provided training for new employees on job-related duties and safety procedures.
• Communicated regularly with supervisors regarding progress updates, concerns, or questions about upcoming tasks.
• Checked project details to verify job site materials and equipment.
• Viewed and checked job equipment to determine maintenance requirements.
• Complied with federal and company regulations to maintain high level of job site safety.

• Measured and marked cutting lines on materials using a ruler, pencil, and chalk line.
• Cut and shaped material to specified measurements using hand tools such as saws, chisels, planes, and drills.
• Assembled cut and shaped materials and fastened them together with nails, screws, dowels, glue or metal connectors.
• Installed cabinets, doors frames, windows frames, baseboards and other fixtures according to specifications.
• Operated power equipment such as routers, joiners and sanders to shape wood components.
• Repaired furniture pieces by reinforcing joints or replacing broken parts.
• Read blueprints or drawings for information on specific construction projects.
• Inspected finished products for conformance to standards of quality and accuracy in dimensions.
• Performed rough framing tasks such as laying out walls or installing studs in preparation for drywall installation.
• Maintained a safe work environment by adhering to all safety policies and procedures while performing job duties.
• Transported tools and supplies from one job site to another using company vehicle.
• Used ladders safely when accessing hard-to-reach areas during installations.
• Worked with supervisor in order to learn proper techniques for various carpentry tasks.
• Cleaned job sites daily after completion of each task ensuring no debris was left behind.
• Disposed of waste materials properly following local regulations regarding hazardous materials disposal.
• Ensured that all work completed met building codes prior to final inspection.
• Collaborated with other tradesmen in order to ensure efficient completion of projects within designated timeframes.
• Cut materials on job site to prepare for installation.
• Cleaned job site after work completion and disposed of debris in proper containers.
• Helped with movement of materials and equipment to different job sites.
• Completed hands-on training with skilled carpenters, resulting in woodwork proficiency with equipment.
• Followed OSHA and corporate safety regulations and procedures.
• Installed drywall, ceilings and trim and fabricated replacement trim and moldings.
• Installed, assembled and repaired woodwork, millwork, cabinetry and trim under supervision of master carpenter.
• Assisted journeyman carpenters in installing fixtures and fittings.
• Read and interpreted specifications and construction drawings to determine best techniques to complete each job.
• Encouraged feedback from foreman and trade workers on site to incorporate suggestions into later work.
• Worked with journeyman carpenters in insulating offices to soundproof and control temperature.
• Uncovered product defects and addressed with job foreman.
• Maintained clean and organized workplace to optimize performance, efficiency and safety.
• Utilized various tools, equipment, materials and forming systems to complete construction tasks.
• Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
• Worked independently on projects and tasks within carpentry team.
• Installed windows, flooring or trim using hand or power tools.
• Took accurate measurements to calculate size and amount of materials needed for project completion.
• Measured and marked cut lines on materials using ruler or marking gauge.
• Fashioned frameworks or props using hand tools and wood screws, nails or glue.
• Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.
• Consistently constructed square and level projects.
• Removed damaged or defective parts or sections of structures and repaired or replaced using hand tools.
• Studied blueprints or building plans to prepare layout and materials required.
• Roughed in door and window frames or subflooring in structures undergoing construction or repair.
• Adhered to project blueprints and requirements to deliver quality work.
• Erected scaffolding to assemble above-ground structures.
• Verified trueness of construction using plumb and level.
• Bore boltholes in wood, masonry or concrete using electric or pneumatic drill.
• Covered subfloors with building paper and lay hardwood or parquet floors by nailing to subfloor or cementing to mastic base.
• Inspected tiles, wall coverings or woodwork for breakage or damage.
• Maintained records and documented actions for progress reports.

• Measured, cut and shaped wood materials to specifications using hand tools, such as saws and chisels.
• Installed cabinets, fixtures and trim according to plans and blueprints.
• Fabricated staircases, doors, window frames and other wooden components for buildings.
• Assembled furniture using glue, dowels, screws and nails.
• Repaired or replaced damaged structures or components.
• Built jigs and fixtures to assist in the production of parts.
• Read blueprints, schematics and drawings to determine layout requirements.
• Prepared surfaces by sanding or scraping off old finishes prior to refinishing them.
• Fitted door locksets, deadbolts and other hardware on doors according to manufacturer's instructions.
• Installed drywall sheets onto walls or ceilings using nails or screws.
• Cut countertops from laminated material following template measurements.
• Installed interior trim work such as baseboards and moldings around windows and doors.
• Laid out flooring patterns according to design templates or customer specifications.
• Operated power tools safely when performing carpentry tasks such as drilling holes into lumber pieces.
• Inspected completed projects for quality assurance purposes before delivering them to customers.
• Calculated material costs for projects based on labor estimates provided by clients.
• Maintained a clean job site at all times by disposing of debris properly after each shift.
• Provided consultation services for homeowners regarding custom carpentry designs.
• Performed routine maintenance on carpentry equipment such as saws and drills.
• Performed various carpentry duties, including both rough and finish carpentry.
• Used various carpenter's hand tools, portable power tools and standard measuring instruments.
• Shaped or cut materials to proper measurements using hand tools, machines or power saws.
• Cut timber, panels and other wooden materials according to measured dimensions.
• Repaired or replaced damaged or defective parts using power tools and equipment.
• Installed building windows, trim and cabinetry alone or with assistants to meet job deadlines.
• Used band, circular and compound miter saws.
• Installed cabinets, base cabinets and crown molding.
• Studied blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.
• Promoted team safety by keeping work areas free of hazards.
• Conducted inspections, diagnosed problems, took measurements and made necessary adjustments to complete projects according to specifications.
• Positioned and installed floor joists, trusses and rafters.
• Cut and installed tile and hardwood flooring for residential and commercial buildings.
• Reviewed jobsite needs with foreman and coordinated construction.
• Examined buildings and project specifications to determine measurements.
• Led apprentices and trainees in building construction and renovation.
• Anchored and braced forms to complete precise joining.
• Applied design-specific wood and composite trim according to architectural plans and neighborhood regulations.
• Measured, cut and installed staircase spindles.
• Fabricated cabinet frames using a variety of woodworking tools, including saws, routers, and jointers.
• Drilled pocket holes to ensure secure joints for cabinets.
• Installed hinges and drawer slides on cabinetry.
• Assembled pre-fabricated cabinets according to manufacturer's instructions.
• Finished cabinetry with stains, paints, and varnishes.
• Measured and cut wood pieces to exact dimensions required for each project.
• Applied veneers to completed cabinet components prior to assembly.
• Constructed raised panel doors with router table.
• Routed out grooves for door panels as well as concealed hinges.
• Kept work area clean throughout the day while adhering to safety protocols.
• Assisted other members of the team with various tasks as needed.
• Tested fitment of installed items before closing out projects.
• Finished cabinets by sanding, staining and installing.
• Measured cabinet spaces and designed detailed layouts.
• Interpreted work instructions and diagrams to set up and execute assigned projects.
• Operated sanders and laminating machines to adhere wood laminate to surfaces.
• Promoted and complied with company policies and OSHA safety requirements.
• Utilized various tools, equipment, materials and forming systems to complete construction tasks.
• Maintained clean and organized workplace to optimize performance, efficiency and safety.
• Worked independently on projects and tasks within carpentry team.
• Fit cabinets and countertops within installation space with exceptional accuracy and attention to detail.
• Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
• Took accurate measurements to calculate size and amount of materials needed for project completion.
• Adhered to tool and equipment safety protocols and promoted worksite safety, protecting both personnel and equipment.
• Mastered panel saw, clamps and drilling and dowel machinery and applied skills toward producing high-quality work for every customer.
• Studied blueprints and specifications to identify size and shape of patterns and implement required machine setups.
• Consistently constructed square and level projects.
• Inspected each product upon completion to evaluate overall quality, assign grades and remove unacceptable products.
• Assisted with installation of base, trim and crown moldings to achieve desired looks and quality of construction.
• Reinforced joints with nails and fasteners to prepare articles for finishing.
• Operated boring machines to bore holes for insertion of screws and dowels.
• Sprayed assembled articles with protective or decorative finishes to desired look.