Manuel Esquivel
Odessa,TX
Summary
Focused Occupational Health and Safety Technician experienced in calibrating equipment for use. Knowledgeable in safety procedures and job site inspections. Considered thorough and reliable in all types of situations.
Overview
12
12
years of professional experience
1
1
Certification
Work History
Safety Technician
American Safety services
Odessa, TX
08.2024 - Current
- Worked effectively with multiple contractors at various sites providing safety training for employees.
- Assisted in preparing reports related to safety activities such as incident rates, near misses, audits.
- Advised management on current available safety technologies and equipment appropriate for installation or implementation within facility.
- Reviewed compliance of paperwork, display and operational procedures to promote transparency.
- Maintained records of inspections, tests, and evaluations of safety systems.
- Inspected and monitored safety equipment to ensure compliance with applicable regulations.
Maintenance Crew Member
Rhoeds construction
Perryton, Texas
11.2023 - 08.2024
- Implemented troubleshooting techniques to resolve issue.
- Implemented preventative maintenance schedules to reduce breakdowns and extend equipment lifespan.
- Assisted with installation of new equipment when necessary.
- Managed inventory of maintenance supplies and equipment.
Welders Helper
Barrilouex
Pecos, TX
05.2023 - 10.2023
- Buffing ,Grinding pipe
- Measuring,cutting pipe
- Fitting and leveling pipe
Welders Helper
XCU
Eunice, NM
01.2023 - 03.2023
- Grinding
- Buffing pipes
- Worked with pipe line pipes
- Fabrication
Maintenance
Seaboard Foods
Guymon, OK
12.2020 - 12.2022
- Maintain, service, clean and properly store equipment
- Check functionality of safety systems
- Repair all damages to building surfaces
- Participate in different projects
- Report to a facilities or maintenance manager for issues
- Ensure adherence to quality standards and health and safety regulations
- Perform other related duties and activities as required
- Fix heaters/AC
- PVC work
- Pig farm feed motors check make sure they're running accordingly
Maintenance Worker
Hitch Enterprises
Guymon, OK
10.2019 - 10.2020
- Do concrete
- Drive tractors
- Bobcats fix Bricks, water tanks ,cables, take care of water wells make sure there working
Helper/Laborer
Wheelers drilling
Odessa, TX
04.2019 - 10.2019
- Service calls for water wells, fix water wells, measure how much water is being pumped.
Wind tower climber
Blattner Energy, Inc.
McCamey, TX
10.2018 - 12.2018
- Climb up the windmills
- Do Maintenance on them
- Change out the motors to the windmills
Hand Laborer
Ron wheeler drilling
Odessa, TX
03.2018 - 10.2018
- Service calls for water wells, fix water wells, measure how much water is being pumped.
Labor Hand
Patriots drilling
Odessa, TX
09.2017 - 03.2018
- Help the mechanics break down the motors and help rebuild them for the oilfield
Handyman/Laborer
Cactus Cans
Odessa, TX
02.2017 - 09.2017
- Pour concrete builds forms for the oil rigs build rounds for the tanks
Pen Rider
Hitch
Guymon, OK
01.2015 - 12.2016
- Drive trucks, tractors, and other equipment to distribute feed to animals
- Examine animals to detect illness, injury, or disease, and to check physical characteristics, such as rate of weight gain
- Shift animals between grazing areas to ensure that they have sufficient access to food
- Provide medical treatment, such as administering medications and vaccinations, or arrange for veterinarians to provide more extensive treatment
- Patrol grazing lands on horseback or using all-terrain vehicles
- Handling and Moving Objects
- Controlling Machines and Processes
- Processing Information
- Coordinating the Work and Activities of Others
- Analyzing Data or Information
- Experience with: All terrain vehicles ATV, Animal trailers, Cattle chutes, Dehorners, Ear taggers, Farm trucks, Horse bridles, Horse saddles, Nail trimmers, Shovels
Construction Laborer
Shores Lift
Odessa, TX
05.2014 - 12.2014
- Clean or prepare construction sites to eliminate possible hazards.
- Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials.
- Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
- Communicating with Supervisors.
- Performing General Physical Activities.
- Handling and Moving Objects
- Loading and unloading materials.
Waiter
Ajuas Restaurant
Odessa, TX
04.2013 - 08.2013
- Take orders, take the food out to customers, check on them to see if they're food was good if they needed anything.
- Refilled they're drinks
Wind installation (climber)
Blattner Energy, Inc.
Wilton, ND
10.2020
- Raise, place, and unite iron and other structural members to form completed structures or structural frameworks.
- Tower Wiring Summary: Install, test, and repair wiring, motors, equipment, and control systems in accordance with all applicable plans, specifications, codes, and industry standards by performing the following duties1. Setup and tear down crane by removing pins and sections, cable and weights; and set boom on truck.
- Set base section by attaching rigging to cranes and taglines to towers; pick and wash tower; install nuts and bolts halfway and lift and grout tower; lower tower onto leveling nuts and secure remaining nuts.
- Assemble rotor by rig hub and blades; stab blades into hubs; rattle nuts inside hub; pitch blades and tie down; and place stands under blades and dead men.
- Set the rotor after washing the rotor and hub; then attach tag lines and remove bolts from shipping bracket; and rig to crane.
- Set the nacelle by climbing the tower and prep top flange; attach rigging and taglines to nacelle; and pick nacelle and clean bottom flange.
- Install the cooler by opening the shipping container (cut bands); pull the parts out; conduct cooler prep work; and lift cooler to position and set, bolt, and torque.
- Set VPM by opening container and inspect; install lifting brackets; drill template holes; and cover controller and secure.
- Set mid, upper mid, and top sections by attaching rigging and tagline to towers; wash and/or paint tower; and align towers and install bolts to secure sections.
- Fill tower with oil and check levels.
- Move cranes by putting outriggers and crane boom in travel position; putting T-bar on flat bed; and scout route and plan movement.
- Perform site evaluations and general clean-up.
- Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications and local electrical codes.
- Follows diagrams or blueprints, ensuring that concealed wiring is installed before completion.
- Measures, cuts, bends, threads, assemble, and installs electrical conduit.
- Pulls wiring through conduit.
- Splices wires by stripping insulation from terminal leads, twisting or soldering wires together, and applying tape or terminal caps.
- Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels.
- Connects power cables to equipment, such as electric range or motor, and installs grounding leads.
- Tests continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as ohmmeter, battery and buzzer, and oscilloscope.
- Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement.
Education
High school -
Odessa High School
Odessa, TXSkills
- General Labor
- Forklift
- General Laborer
- Climbing
- Concrete Forming
- Concrete Finishing
- Handyman
- Construction
- Customer service
- Driving
- Safety training
- Regulatory compliance
- Equipment inspection
- Teamwork
- Safety documentation
- Active listening
Certification
Drivers License
Personal Information
Work Permit: Authorized to work in the US for any employer
Timeline
Safety Technician
American Safety services
08.2024 - Current
Maintenance Crew Member
Rhoeds construction
11.2023 - 08.2024
Welders Helper
Barrilouex
05.2023 - 10.2023
Welders Helper
XCU
01.2023 - 03.2023
Maintenance
Seaboard Foods
12.2020 - 12.2022
Wind installation (climber)
Blattner Energy, Inc.
10.2020
Maintenance Worker
Hitch Enterprises
10.2019 - 10.2020
Helper/Laborer
Wheelers drilling
04.2019 - 10.2019
Wind tower climber
Blattner Energy, Inc.
10.2018 - 12.2018
Hand Laborer
Ron wheeler drilling
03.2018 - 10.2018
Labor Hand
Patriots drilling
09.2017 - 03.2018
Handyman/Laborer
Cactus Cans
02.2017 - 09.2017
Pen Rider
Hitch
01.2015 - 12.2016
Construction Laborer
Shores Lift
05.2014 - 12.2014
Waiter
Ajuas Restaurant
04.2013 - 08.2013
High school -
Odessa High School