Summary
Overview
Work History
Education
Skills
Timeline
Generic

Scott A. Lemere

Summary

Water Treatment Service Expert with more than 20 years of experience in the Water Treatment industry. Extensive experience working with Reverse Osmosis, CDI, and Deionization systems. Experienced performing maintenance and repairs relating to electrical and mechanical components. Dedicated Pipefitter with background in job coordination and worksite setup. Knowledgeable in safety processes, regulations and pipe selection. Offering successful career history comprising more than 20 years. To seek and maintain full-time position that offers professional challenges utilizing interpersonal skills, excellent time management and problem-solving skills.

Overview

39
39
years of professional experience

Work History

Pipefitter Journeyman

Department Of Veterans, Federal Health Care
03.2022 - Current
  • This position is located in the Pipe Shop, Facility Management Service of the Captain James A Lovell Federal Health Care Center
  • The primary purpose of this position is to provide Pipefitting/Plumbing Services
  • Major Duties: -Repairs or installs pipe-fitting systems (including high-pressure systems); cutting, threading, soldering and cementing joints on black and cast iron and galvanized steel, copper, brass, P.V.C
  • Piping, and clay drainage tile
  • Repair, install or replace building service equipment or systems including: centrally supplied water, air, vacuum, oxygen, natural gas, steam and distilled water including supporting devices such as pressure regulators, valves, strainers and traps, and related controls and primary distribution systems such as water, steam, natural gas and sanitary drainage
  • Responsible for the repair and maintenance of a variety of hospital equipment supported by building service, equipment and systems
  • Examples of equipment include: dietetic equipment including ranges, ovens and dishwashers, laundry equipment including washers and dryers, pumps including condensate and sump and sterilizers, autoclaves and stills
  • Uses rodding equipment to open clogged drains and waste lines serving sanitary and storm drains
  • Responsible to insulate hot and cold water; steam condensate return piping and to apply insulation to duct work, hot water storage tanks and other related equipment
  • Performs other related duties as assigned
  • Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Inspected and tested existing pipe systems to identify system defects and malfunctions.
  • Installed new systems and connected piping to existing components by welding, bolting and threading.
  • Threaded pipes using piping machines.
  • Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
  • Connected piping systems to water heaters, boilers, pumps and auxiliary equipment to complete installations.
  • Calibrated piping systems and components to optimize performance.
  • Replaced faulty parts and repaired structural damages to pipes and related components.
  • Monitored pipeline pressure and flow rates to facilitate safe and efficient operation.
  • Performed preventive maintenance to clean, adjust and lubricate piping systems and parts.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Eliminated risks by correctly identifying potential safety hazards.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.
  • Measured, threaded, and cut materials to correct angles.
  • Filled pipe systems with water and air to determine location of leaks.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Used clamps and brackets to attach pipes to walls, structures and fixtures.
  • Planned pipe system layout, installation and repair according to specifications.
  • Secured rising mains and boiler piping to structural supports in new construction and remodeling projects.
  • Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
  • Expanded trade knowledge by networking with colleagues and participating in courses and seminars.
  • Reviewed blueprints and project specifications to determine the correct plumbing solutions.
  • Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.
  • Assisted with repairs to steam, drainage, and sewer lines.
  • Keep detailed job records using Excel to maintain an up-to-date filing system.
  • Inspected sewers and piping systems to assess quality and condition.
  • Set up appliances like water heaters, filters, and dishwashers with correct settings to maximize performance.

Pipefitter Journeyman

James A Lovell FHCC
04.2021 - 03.2022
  • Of Veterans affairs -Hines Illinois
  • Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Inspected and tested existing pipe systems to identify system defects and malfunctions.
  • Installed new systems and connected piping to existing components by welding, bolting and threading.
  • Threaded pipes using piping machines.
  • Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
  • Connected piping systems to water heaters, boilers, pumps and auxiliary equipment to complete installations.
  • Calibrated piping systems and components to optimize performance.
  • Replaced faulty parts and repaired structural damages to pipes and related components.
  • Monitored pipeline pressure and flow rates to facilitate safe and efficient operation.
  • Performed preventive maintenance to clean, adjust and lubricate piping systems and parts.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Eliminated risks by correctly identifying potential safety hazards.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.
  • Measured, threaded, and cut materials to correct angles.
  • Filled pipe systems with water and air to determine location of leaks.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Planned pipe system layout, installation and repair according to specifications.
  • Secured rising mains and boiler piping to structural supports in new construction and remodeling projects.
  • Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
  • Expanded trade knowledge by networking with colleagues and participating in courses and seminars.
  • Reviewed blueprints and project specifications to determine correct plumbing solutions.
  • Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.
  • Assisted with repairs to steam, drainage, and sewer lines.
  • Kept detailed job records using Excel to maintain up-to-date filing system.
  • Inspected sewers and piping systems to assess quality and condition.
  • Set up appliances like water heaters, filters, and dishwashers with correct settings to maximize performance.

Pipefitter Journeyman

Department Of Veterans, Federal Healthcare
03.2019 - 04.2021
  • This position is located in the Pipe Shop, Facility Management Service of the Edward Hines, Jr
  • Veterans Hospital, Hines, IL
  • The primary purpose of this position is to provide Pipefitting/Plumbing Services
  • Major Duties: -Repairs or installs pipe-fitting systems (including high-pressure systems); cutting, threading, soldering and cementing joints on black and cast iron and galvanized steel, copper, brass, P.V.C
  • Piping, and clay drainage tile
  • Repair, install or replace building service equipment or systems including: centrally supplied water, air, vacuum, oxygen, natural gas, steam and distilled water including supporting devices such as pressure regulators, valves, strainers and traps, and related controls and primary distribution systems such as water, steam, natural gas and sanitary drainage
  • Responsible for the repair and maintenance of a variety of hospital equipment supported by building service, equipment and systems
  • Examples of equipment include: dietetic equipment including ranges, ovens and dishwashers, laundry equipment including washers and dryers, pumps including condensate and sump and sterilizers, autoclaves and stills
  • Uses rodding equipment to open clogged drains and waste lines serving sanitary and storm drains
  • Responsible to insulate hot and cold water; steam condensate return piping and to apply insulation to duct work, hot water storage tanks and other related equipment
  • Performs other related duties as assigned
  • Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Inspected and tested existing pipe systems to identify system defects and malfunctions.
  • Installed new systems and connected piping to existing components by welding, bolting and threading.
  • Threaded pipes using piping machines.
  • Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
  • Connected piping systems to water heaters, boilers, pumps and auxiliary equipment to complete installations.
  • Calibrated piping systems and components to optimize performance.
  • Replaced faulty parts and repaired structural damages to pipes and related components.
  • Monitored pipeline pressure and flow rates to facilitate safe and efficient operation.
  • Performed preventive maintenance to clean, adjust and lubricate piping systems and parts.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Eliminated risks by correctly identifying potential safety hazards.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.
  • Measured, threaded, and cut materials to correct angles.
  • Filled pipe systems with water and air to determine location of leaks.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Used clamps and brackets to attach pipes to walls, structures and fixtures.
  • Planned pipe system layout, installation and repair according to specifications.
  • Secured rising mains and boiler piping to structural supports in new construction and remodeling projects.
  • Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
  • Expanded trade knowledge by networking with colleagues and participating in courses and seminars.
  • Reviewed blueprints and project specifications to determine correct plumbing solutions.
  • Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.
  • Assisted with repairs to steam, drainage, and sewer lines.
  • Kept detailed job records using Excel to maintain up-to-date filing system.
  • Inspected sewers and piping systems to assess quality and condition.
  • Set up appliances like water heaters, filters, and dishwashers with correct settings to maximize performance.

Field Service Technician III

Evoqua Water Technologies
09.2013 - 12.2018
  • Install and maintain water systems for University's, Factories, hospitals, Schools, Military bases
  • Measure, cut, thread, or bend pipe to required angle, using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machines
  • Study building plans and inspect structures to assess material and equipment needs, to establish the sequence of pipe installations, and to plan installation around obstructions such as electrical wiring
  • Fill pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaks
  • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, or welding equipment
  • Review blueprints, building codes, or specifications to determine work details or procedures
  • Anchor steel supports from ceiling joists to hold pipes in place.
  • Managed on-site and off-site installation, repair, maintenance, and test tasks.
  • Followed safety procedures to avoid injuries in field.
  • Operated hand tools and power equipment according to company safety procedures.
  • Completed partial or full dismantling of equipment to quickly repair or replace defective components and restore functionality.
  • Responded quickly to emergency maintenance requests for timely on-call support.
  • Provided technical support to troubleshoot, repair and maintain operational efficiencies in hydraulic, mechanical, and electrical systems.
  • Installed new equipment and explained operation and routine maintenance protocols to customers.
  • Reviewed technical documentation to complete equipment maintenance and repair.
  • Established positive customer relationships by providing punctual, cost-effective solutions.
  • Discussed and recommended service options with customers and explained costs involved.
  • Reviewed aspects of job upon completion to alleviate equipment failure and prevent callbacks.
  • Maintained company field response vehicle stocked with repair and replacement parts valued over $50,000.
  • Interpreted equipment diagrams and blueprints to fully understand mechanical and electrical systems in need of service.
  • Developed and implemented customized service plans to meet customer needs.
  • Attended workshops and team meetings to maximize technical knowledge.
  • Tested systems, noting issues and completing preventive maintenance.
  • Diagnosed and repaired problems with electrical and mechanical systems.
  • Worked with diverse types of weather and ground conditions.
  • Tended to machines, troubleshot malfunctions and completed basic repairs to keep equipment fully functional and well-maintained.
  • Maintained strong focus on safety and efficiency to provide comprehensive support to personnel performing skilled repairs.
  • Inspected, evaluated and calibrated electrical and mechanical systems and components.
  • Demonstrated to customers proper methods for operating equipment after it had been installed.
  • Managed maintenance activities, supervised staff and inspected equipment.
  • Followed established procedures for inspection of belts, drives and motors, performing needed maintenance.
  • Wrote and revised maintenance procedures.
  • Researched and implemented new technologies and equipment.
  • Checked, repaired and repacked survival equipment to meet specifications.

Service Technician

COMPLETE WATER SOLUTIONS
03.2014 - 03.2015
  • Diagnose and resolve problems involving water systems, including softeners, filters, reverse osmosis, and high purity water systems
  • This included performing maintenance and repair on electrical and mechanical components (Relays, pumps, starters, etc.)
  • Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices
  • Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate
  • Inspect, operate, or test machinery or equipment to diagnose machine malfunctions
  • Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment
  • Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists
  • Test and treat water supply
  • Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from storerooms
  • Operate cutting torches or welding equipment to cut or join metal parts
  • Perform general cleaning of buildings or properties
  • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, or welding equipment
  • Review blueprints, building codes, or specifications to determine work details or procedures
  • Anchor steel supports from ceiling joists to hold pipes in place.
  • Diagnosed and troubleshot problems, repairing, and restoring machines to peak performance.
  • Responded to customer inquiries quickly and professionally to increase satisfaction.
  • Inspected equipment to diagnose operational issues.
  • Installed new equipment and explained operation and routine maintenance protocols to customers.
  • Explained diagnostic findings to customers and outlined repair or service options.
  • Adhered to safety protocols and policies to reduce workplace hazards.
  • Maintained accurate records of service calls and customer interactions for training and accountability purposes.

Service Technician Foreman

CROSSBOW WATER
10.2009 - 09.2013
  • Install, maintain, and troubleshoot water systems (Reverse Osmosis, CDI, and Deionization systems) and responsible of all scheduled maintenance
  • Perform routing work and responsible of a crew of Service men
  • Oversee activities directly related to making products or providing services
  • Manage staff, preparing work schedules and assigning specific duties
  • Submit reports and review reports or problems with superior
  • Demonstrate use and care of equipment for customer use.
  • Diagnosed and troubleshot problems, repairing, and restoring machines to peak performance.
  • Installed new equipment and explained operation and routine maintenance protocols to customers.
  • Responded to customer inquiries quickly and professionally to increase satisfaction.
  • Inspected equipment to diagnose operational issues.
  • Worked with diverse types of weather and ground conditions.

Midwest Regional Service Manager

MARCOR PURIFICATION
12.2006 - 10.2009
  • Manage multiple states in the dialysis business
  • Maintain high standards in water treatment and leading multiple crews of men
  • Oversee activities directly related to making products or providing services
  • Direct and coordinate activities of businesses or departments concerned with the production, pricing, sales, or distribution of products
  • Manage staff, preparing work schedules and assigning specific duties.
  • Cultivated culture of open communication, collaboration and shared accountability for business success.
  • Oversaw daily, weekly and monthly business reporting and leveraged information to optimize forecasting and future business plans.
  • Recognized and rewarded performance to motivate continued success.
  • Supported site management to empower front-line associates with skills and knowledge to carry out day-to-day assignments.
  • Trained new employees on proper protocols and customer service standards.

Service Technician

CROSSBOW WATER
09.2002 - 12.2006
  • Install and maintain water systems for University's, Factories, hospitals, Schools, Military bases
  • Measure, cut, thread, or bend pipe to required angle, using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machines
  • Study building plans and inspect structures to assess material and equipment needs, to establish the sequence of pipe installations, and to plan installation around obstructions such as electrical wiring
  • Fill pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaks
  • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, or welding equipment
  • Review blueprints, building codes, or specifications to determine work details or procedures
  • Anchor steel supports from ceiling joists to hold pipes in place
  • Led a crew while facility was under construction building a resin regeneration plant in Glenwood Ill
  • Diagnosed and troubleshot problems, repairing, and restoring machines to peak performance.
  • Responded to customer inquiries quickly and professionally to increase satisfaction.
  • Installed new equipment and explained operation and routine maintenance protocols to customers.
  • Explained diagnostic findings to customers and outlined repair or service options.
  • Worked with diverse types of weather and ground conditions.

Pump Builder/Tester

FRISTAM PUMPS
02.1999 - 01.2002
  • Build and test high end Stainless steel FDA pumps
  • Provide technical expertise or support related to manufacturing
  • Review product designs for manufacturability or completeness
  • Train production personnel in new or existing methods
  • Purchase equipment, materials, or parts.
  • Defined core problems and determined key strategies for investigating and remediating concerns.
  • Worked well in a team setting, providing support and guidance.
  • Worked effectively in fast-paced environments.
  • Managed time efficiently in order to complete all tasks within deadlines.
  • Demonstrated respect, friendliness and willingness to help wherever needed.
  • Excellent communication skills, both verbal and written.

Plumbing Apprentice

HOOPER CONSTRUCTION
06.1996 - 02.1999
  • Listened to instructions from journeyman plumber, gaining valuable onsite job training.
  • Removed old sinks, toilets and pipes in preparation for installation of new fixtures.
  • Tested for leaks in new and repaired systems to verify functional and safe working condition.
  • Performed basic and semi-skilled work under supervision and instruction from lead plumber.
  • Organized and moved materials from truck to job site to support project requirements.
  • Unclogged sinks and toilets for customers using tools and drain cleaners.
  • Followed safety practices with tools and general behaviors to prevent accidents and safeguard equipment.
  • Safely handled tools and equipment in large-scale projects.
  • Responded to emergency situations to resolve immediate safety concerns.
  • Requested equipment and supplies to maintain inventory and availability of required items.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
  • Measured, threaded, and cut materials to correct angles.
  • Set up appliances like water heaters, filters, and dishwashers with correct settings to maximize performance.

Plumber Assistant

VAN NATTA PLUMBING
08.1988 - 05.1996
  • Assist Journeymen Plumbers and driving equipment truck
  • Cut or drill holes in walls or floors to accommodate the passage of pipes
  • Measure, cut, thread and assemble new pipe, placing the assembled pipe in hangers or other supports
  • Perform rough-ins, repair and replace fixtures and water heaters, and locate, repair, or remove leaking or broken pipes
  • Assist pipe fitters in the layout, assembly, and installation of piping for air, ammonia, gas, and water systems
  • Cut pipe and lift up to fitters
  • Mount brackets and hangers on walls and ceilings to hold pipes, and set sleeves or inserts to provide support for pipes
  • Clean shop, work area, and machines, using solvent and rags.
  • Removed old sinks, toilets and pipes in preparation for installation of new fixtures.
  • Listened to instructions from journeyman plumber, gaining valuable onsite job training.
  • Performed basic and semi-skilled work under supervision and instruction from lead plumber.
  • Organized and moved materials from truck to job site to support project requirements.
  • Unclogged sinks and toilets for customers using tools and drain cleaners.
  • Followed safety practices with tools and general behaviors to prevent accidents and safeguard equipment.
  • Assisted licensed plumbers in installation and repair of plumbing systems.
  • Used pipe wrenches, saws and drills safely to execute basic and complex plumbing tasks.
  • Unclogged drains and replaced faulty fixtures to restore functionality to customer plumbing.
  • Installed plumbing systems and fixtures in residential and commercial properties.
  • Installed valves, hangers, supports, and flanges inside piping systems.
  • Followed safety practices and procedures to reduce on-site risks.
  • Selected type and size of piping required for each project.
  • Cleaned and maintained plumbing tools and equipment to reduce potential downtime.
  • Independently worked on projects, while offering process coordination and cooperation with other teams.

Cavalry Scout

US ARMY
09.1984 - 07.1987
  • The cavalry scout is responsible for being the eyes and ears of the commander during battle
  • They engage the enemy in the field, track and report their activity and direct the employment of weapon systems to their locations
  • JOB DUTIES
  • Performs duties as crewmember, operates, and performs operator maintenance on scout vehicles: Cavalry Fighting Vehicle (M3 Bradley CFV), HMMWV (Humvee), M1127 Reconnaissance Vehicle (Stryker), crew-served weapons, anti-armor weapons, and communications equipment
  • Loads, clears, and fires individual and crew-served weapons
  • Engages enemy armor with anti-armor weapons
  • Operates and performs operator maintenance on wheeled vehicles
  • Assists in the recovery of wheeled and tracked vehicles
  • Secures, prepares, and stows ammunition on scout vehicles
  • Performs mounted and dismounted navigation
  • Serves as member of observation and listening post
  • Gathers and reports information on terrain features and enemy strength, disposition, and equipment
  • Applies principles of escape and evasion
  • Collects data for the classification of routes, fords, tunnels, and bridges
  • Performs dismounted patrols
  • Employs principles of cover and concealment and camouflage
  • Assists with construction of light field fortifications, laying and removal of mines, and emplacing demolitions
  • Requests and adjusts indirect fire.
  • Directed platoon tactical movements, platoon security operations and platoon route and zone reconnaissance.
  • Operated wheeled and tracked vehicles and communications equipment.
  • Educated newer members on platoon inner workings, answered questions and provided advice on daily duties.
  • Prepared mission equipment for deployment and secured vehicles prior to transport.
  • Communicated updates on task completion to supervisors, maintaining smooth operations.
  • Skilled at working independently and collaboratively in a team environment.
  • Self-motivated, with a strong sense of personal responsibility.
  • Proven ability to learn quickly and adapt to new situations.
  • Worked well in a team setting, providing support and guidance.
  • Worked effectively in fast-paced environments.
  • Managed time efficiently in order to complete all tasks within deadlines.
  • Excellent communication skills, both verbal and written.
  • Organized and detail-oriented with a strong work ethic.

Education

Bachelor of Science - Computer Science Cybersecurity Engineering

Colorado Technical University
Colorado Springs, CO
10.2025

Certificate: Welding/Metallurgy -

PRAIRIE STATE COLLEGE
Madison, WI

Occupational Certificate: Welding -

MADISON AREA TECHNICAL COLLEGE
Madison, WI

High School Diploma -

LAKELAND UNION HIGH SCHOOL
Minocqua, WI

Skills

  • Project Estimation and Bidding
  • Burning Torch
  • Piping Fabrication and Installation
  • Power Saws
  • Machine Operations
  • Materials Ordering
  • Hand and Power Tools
  • Safe Work Practices
  • Safety Techniques
  • Pipe Fabrication
  • Maintaining Clean Work Areas
  • System Troubleshooting
  • Piping Layout
  • Pipe Measuring and Cutting

Timeline

Pipefitter Journeyman

Department Of Veterans, Federal Health Care
03.2022 - Current

Pipefitter Journeyman

James A Lovell FHCC
04.2021 - 03.2022

Pipefitter Journeyman

Department Of Veterans, Federal Healthcare
03.2019 - 04.2021

Service Technician

COMPLETE WATER SOLUTIONS
03.2014 - 03.2015

Field Service Technician III

Evoqua Water Technologies
09.2013 - 12.2018

Service Technician Foreman

CROSSBOW WATER
10.2009 - 09.2013

Midwest Regional Service Manager

MARCOR PURIFICATION
12.2006 - 10.2009

Service Technician

CROSSBOW WATER
09.2002 - 12.2006

Pump Builder/Tester

FRISTAM PUMPS
02.1999 - 01.2002

Plumbing Apprentice

HOOPER CONSTRUCTION
06.1996 - 02.1999

Plumber Assistant

VAN NATTA PLUMBING
08.1988 - 05.1996

Cavalry Scout

US ARMY
09.1984 - 07.1987

Bachelor of Science - Computer Science Cybersecurity Engineering

Colorado Technical University

Certificate: Welding/Metallurgy -

PRAIRIE STATE COLLEGE

Occupational Certificate: Welding -

MADISON AREA TECHNICAL COLLEGE

High School Diploma -

LAKELAND UNION HIGH SCHOOL

Similar Profiles

  • Anthony Golson

    Anthony GolsonAnthony Golson

    Medical Support Assistant at Department of Veterans Affairs Central Alabama Health Care SystemMedical Support Assistant at Department of Veterans Affairs Central Alabama Health Care System

  • Christina Athanasia Maryannis

    Christina Athanasia MaryannisChristina Athanasia Maryannis

    Advanced Medical Support Assistant (Clinical Research Hub) at U.S. Department of Veterans Affairs – VA Palo Alto Health Care SystemAdvanced Medical Support Assistant (Clinical Research Hub) at U.S. Department of Veterans Affairs – VA Palo Alto Health Care System

  • Jean Little

    Jean LittleJean Little

    Licensed Practical Nurse at Department Of Veterans Affairs Health Care SystemLicensed Practical Nurse at Department Of Veterans Affairs Health Care System

  • Kevin Rose

    Kevin RoseKevin Rose

    Pipefitter Journeyman at BAE Systems Norfolk Ship RepairPipefitter Journeyman at BAE Systems Norfolk Ship Repair

  • Quinton Yellowhair

    Quinton YellowhairQuinton Yellowhair

    Pipefitter Journeyman at TIC IndustrialPipefitter Journeyman at TIC Industrial

CREATE PROFILE
Scott A. Lemere