Emmanuel Yeboah Nketiah
Electrical Technician
Al Rayyan
Summary
Conscientious Electrician committed to safety in hazardous and restrictive workspaces. Tackles projects with skill and accuracy. Articulate and polite with more than 7 years of experience in installation, troubleshooting and repair.
Electrician Technician knowledgeable about electrical equipment regulations and compliance. Tailors installation techniques according to unique specifications of each electrical system.
Overview
10
10
years of professional experience
13
13
years of post-secondary education
3
3
Languages
Work History
ELV Technician
Loons Security Service
Doha
04.2022 - Current
- Read and interpreted schematics, assembly drawings, parts lists and wire data lists.
- Met scheduled goals with minimum supervision.
- Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
- Conferred with engineers and designers to investigate and solve failure issues.
- Estimated numerical length of runs during new service installations.
- Created, aligned, and optimized electrical instrumentation and testing equipment.
- Attended training committees that wrote training modules for equipment operation and testing.
- Established, repaired and optimized networks by installing wiring, cabling and devices.
- Used diagnostic tools to identify hardware failures and replace non-functional components.
- Assessed system hardware and software and suggested modifications to reduce lag time and improve overall speed.
- Performed installation, maintenance and repair for complex internal computer hardware and various software applications.
- Responded to support requests from end-users and patiently walked individuals through basic troubleshooting tasks.
Industrial Electrician
Contracta Construction UK Ltd
Kumasi
01.2022 - 03.2022
- Connected wires to circuit breakers, transformers and other components.
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
- Inspected transformers and circuit breakers for malfunctions.
- Followed blueprints to install wiring before completion of walls, ceilings or floors.
- Prepared sketches and blueprints.
- Tested circuit continuity to determine electrical compatibility and component safety.
- Repaired and replaced equipment, electrical wiring and fixtures.
- Attached power cables to equipment such as electric range and motor.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
- Installed ground leads and connected power cables to equipment.
- Troubleshot and repaired malfunctioning systems and components.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Followed state and local building regulations based on National Electrical Code.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
- Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Connected wires to circuit breakers, transformers or other components.
- Instructed customers on proper use and safety of electrical systems and equipment.
- Studied building schematics to determine location of wiring and equipment.
- Examined electrical units for loose connections and broken insulation.
- Managed business report generation, recordkeeping and supply ordering.
- Fabricated custom and replacement parts according to specifications, using hand tools.
- Installed 120/208 volt systems and 347/600 volt systems.
Electrical Technician
AFCONS Infrastructure Ltd
Tema
01.2019 - 12.2021
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
- Installed electrical conduit and wiring for power, controls, and lighting.
- Tested wiring and other system parts for electrical flow and function.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Disconnected and removed motors and pumps.
- Installed electrical wiring through conduits and holes in both flooring and walls.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Collaborated with IT department to resolve networking issues.
- Operated and maintained electronic transmitting and receiving equipment.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
- Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
- Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
- Conferred with engineers and designers to investigate and solve failure issues.
- Prepared yearly and technical budgets for electricity projects.
- Analyzed interruption reports and outage databases to identify outage trends and determine needed coordination changes.
- Implemented operational timelines for service shut-offs to be observed.
- Attended training committees that wrote training modules for equipment operation and testing.
- Interpreted scale drawings of new commissions to determine layout of materials and equipment.
- Estimated numerical length of runs during new service installations.
- Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
- Plotted equipment response time and fault range information on graph to determine relay curves.
- Updated hardware and software platforms by implementing automation and efficiency improvements.
- Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
- Reviewed existing electrical engineering criteria to identify necessary revisions, deletions or amendments to outdated material.
- Used surveying equipment to grade and measure land profiles before installation of electrical systems.
- Trained new system users and employees in classroom type sessions to promote useful system knowledge and operations expertise.
- Calculated amounts for designing and testing electrical systems and supplied finished costs to customers.
- Devised and implemented updates and resolutions for handling risks, maintaining compliance and improving designs.
- Evaluated finished assemblies for compliance with standard procedures and design requirements.
- Created, aligned, and optimized electrical instrumentation and testing equipment.
- Interpreted test information to resolve design-related problems.
- Performed maintenance procedures and repairs on existing electrical products and systems.
- Provided on-site engineering and technical services during installation and fielding processes.
- Inspected and performed validation testing for designed systems and third-party installations.
- Identified specific cables, fuses and circuit breakers required for assigned installations.
- Connected wires to circuit breakers, transformers and other components.
- Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Diagnosed, repaired and replaced faulty electrical, electronic and mechanical components to maintain plant safety.
- Adhered to safety policies, procedures and regulatory criteria to maximize preventive controls.
- Inspected and tested electrical equipment, diagnosing malfunctioning apparatus.
- Performed routine preventive maintenance activities and retained copy of equipment programs as backups.
- Prepared reports and technical documentation of day-to-day production processes.
Electrician
MAPA Insaat Construction
Accra
03.2017 - 04.2018
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Stored and maintained power tools and equipment for each job.
- Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
- Visited client sites to confirm space and layout restrictions for equipment installations.
- Installed ground leads and connected power cables to equipment.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Enhanced quality control by inspecting condition of equipment and tools.
- Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
- Provided preliminary sketches and cost estimates for materials and services.
- Inspected worksites and installations to verify compliance with state safety codes.
- Performed routine and complex maintenance and repairs on various electrical equipment.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Examined electrical units for loose connections and broken insulation.
- Installed 120/208 volt systems and 347/600 volt systems.
- Managed business report generation, recordkeeping and supply ordering.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Connected wires to circuit breakers, transformers or other components.
- Instructed customers on proper use and safety of electrical systems and equipment.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Followed state and local building regulations based on National Electrical Code.
- Studied building schematics to determine location of wiring and equipment.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
- Troubleshot and repaired malfunctioning systems and components.
- Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
- Fabricated custom and replacement parts according to specifications, using hand tools.
Senior Electrician
Construtora Oas Ghana Ltd.
Tema
04.2014 - 01.2017
- Operated tools according to prescribed safety practices.
- Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
- Troubleshooted systems and repaired equipment, ensuring compliance with all established guidelines.
- Diagnosed issues and developed effective solutions.
- Interpreted blueprints, schematics, and diagrams of project requirements and initiated appropriate electrical installations.
- Performed troubleshooting to determine issues and appropriate action to complete tasks and provide quality installations.
- Completed rough-in, termination, and underground work.
- Evaluated existing electrical systems for maintenance, repair, and update requirements.
- Verified problems, investigated faults, and troubleshot solutions to enhance installations.
- Trained junior electrical professionals on proper procedures.
- Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment, and handling of materials.
- Repaired and installed new fixtures, wiring, circuits, and motors.
- Tested electrical systems and components for continuity, current, voltage and resistance.
- Assisted in design and installation of electrical systems and components.
- Read technical drawings, diagrams and project documentation to make accurate decisions about electrical system installations and repair work.
- Examined electrical units for loose connections and broken insulation.
- Installed ground leads and connected power cables to equipment.
- Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Studied building schematics to determine location of wiring and equipment.
- Installed 120/208 volt systems and 347/600 volt systems.
- Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
- Managed business report generation, recordkeeping and supply ordering.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Followed state and local building regulations based on National Electrical Code.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
- Fabricated custom and replacement parts according to specifications, using hand tools.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Instructed customers on proper use and safety of electrical systems and equipment.
- Troubleshot and repaired malfunctioning systems and components.
- Connected wires to circuit breakers, transformers or other components.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
Electrician
A K Ghana Wood Ltd.
Akim Oda
06.2013 - 02.2014
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Stored and maintained power tools and equipment for each job.
- Installed ground leads and connected power cables to equipment.
- Performed routine and complex maintenance and repairs on various electrical equipment.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Installed 120/208 volt systems and 347/600 volt systems.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Troubleshot and repaired malfunctioning systems and components.
Education
Technician 1 & 2 - Electrical Engineering
Standard College
Accra, Ghana 04.2016 - 06.2017
Certificate - The PUWER Software
Knights Of Safety
Online Studies 08.2020 - 08.2020
Certificate - Electrical Safety Awareness
Knights Of Safety
Online Studies 08.2020 - 08.2020
Certificate - Electrical Foundation
National Vocational Training Centre
Agona Swedru, Ghana 01.2010 - 05.2012
Certificate - Course Of Instruction
National Vocational Training Centre
Agona Swedru, Ghana 01.2010 - 03.2013
Certificate II - Electrical Engineering Technology
National Vocational Training Centre
Agona Swedru, Ghana 01.2010 - 05.2013
Certificate II - Core Subjects
National Vocational Training Centre
Agona Swedru, Ghana 01.2010 - 05.2013
Skills
Experienced in [Electricals]
Report preparation
System integration
Corrective maintenance
Diagnostic skills
Electrical systems installation
End user support
[Desiel Generator ] Machine operation
Power supplies
Computer-literate
Schematics Interpretation
Knowledge of backup systems
Team Player
Mechanical concepts knowledge
National Electrical Code knowledge
Hand and power tools
Installation and repair specialist
Fluent in [English]
Microsoft Windows expert
RTU and PLC specialist
Residential construction
Complex technical information
Electrical panel upgrades
NEC code regulations
Electrical equipment maintenance
Blueprint fluency
Control circuit troubleshooting
AC/DC control circuitry
Previous technical support experience
Troubleshooting complex control systems
Voltmeter use
Commercial construction
HVAC systems
Excellent interpersonal skills
Time management
Safety procedures and regulations
State and local electrical codes
Electrical provisions installation
Programmable Logic Controllers (PLC)
Exceptionally detail-oriented
Relays and pressure switches
Expert in schematic design
Field installation
Quality assurance
Sub-panel installation
Windows [Version]
Accomplishments
- Received Safety Awareness award for Preventing Electrical Accidents and Preventing National Loss.
Additional Information
Researching is my passion.
I am always learning to improve.
Pay attention to my responsibilities.
Timeline
ELV Technician
Loons Security Service
04.2022 - Current
Industrial Electrician
Contracta Construction UK Ltd
01.2022 - 03.2022
Certificate - The PUWER Software
Knights Of Safety
08.2020 - 08.2020
Certificate - Electrical Safety Awareness
Knights Of Safety
08.2020 - 08.2020
Electrical Technician
AFCONS Infrastructure Ltd
01.2019 - 12.2021
Electrician
MAPA Insaat Construction
03.2017 - 04.2018
Technician 1 & 2 - Electrical Engineering
Standard College
04.2016 - 06.2017
Senior Electrician
Construtora Oas Ghana Ltd.
04.2014 - 01.2017
Electrician
A K Ghana Wood Ltd.
06.2013 - 02.2014
Certificate - Electrical Foundation
National Vocational Training Centre
01.2010 - 05.2012
Certificate - Course Of Instruction
National Vocational Training Centre
01.2010 - 03.2013
Certificate II - Electrical Engineering Technology
National Vocational Training Centre
01.2010 - 05.2013
Certificate II - Core Subjects
National Vocational Training Centre
01.2010 - 05.2013