Kayden Durrant
Hurricane,UT
Summary
Versatile maintenance and automotive repair professional with a solid foundation in carpentry and proven problem-solving skills. Expertise in diagnosing automotive systems and executing quality repairs, significantly enhancing operational efficiency at Automed. Demonstrated mastery in cabinetry through work with Custom Finish Cabinets and Cuzzins, combining technical skill with creative solutions. Results-driven in construction management, specializing in project scheduling, cost control, and safety compliance to meet stringent quality standards.
Overview
10
10
years of professional experience
1
1
Certification
Work History
Maintenance/contractor
Self Employed
Hurricane, UT
08.2023 - Current
- Maintained compliance with internal and regulatory safety standards.
- Responded quickly to service calls, including replacing filters, smoke alarms and locks to ensure safety and well being of tenants.
- Repaired outlets, circuit breakers and lights to restore electrical systems to functionality.
- Developed and maintained agreements to standardize terms and conditions between company and subcontractors or consultants.
- Utilized project management software for efficient tracking and reporting of project progress.
- Planned and coordinated remodeling projects, including scheduling subcontractors and ordering materials.
- Lubricated, cleaned or repaired machinery or equipment.
- Inspected electrical systems to ensure they meet safety standards prior to installation.
- Tended pumps, compressors or generators to provide power or heat or move materials.
Mechanic
Automed
Hurricane, UT
09.2024 - 01.2025
- Performed maintenance inspections, tune-ups, oil changes and other key services.
- Utilized computer diagnostic equipment to troubleshoot electrical issues in vehicles.
- Installed new or rebuilt engines into vehicles following manufacturer's instructions for installation procedures.
- Maintained garage safety protocols to meet regulatory and company expectations.
- Assisted fellow mechanics when necessary during complex repairs.
- Repaired, replaced and adjusted brakes.
- Inspected vehicles for damage and recorded findings to facilitate repairs.
- Diagnosed mechanical problems on a wide variety of vehicles using specialized tools and equipment.
- Tested components and systems using infrared engine analyzers, compression gauges and computerized diagnostic devices.
- Performed full conversions with personalized engine installations and tailored automotive projects.
Cabinetmaker and Installer
custom finish cabinets
Hurricane, UT
01.2023 - 09.2024
- Train new employees on safe use of tools and machines used in cabinetmaking installations.
- Utilized various tools, equipment, materials and forming systems to complete construction tasks.
- Studied blueprints and specifications to identify size and shape of patterns and implement required machine setups.
- Cut materials using saws, routers and other power tools.
- Fabricate, assemble, install and repair wooden cabinets, fixtures, furniture and other items made of wood or wood substitutes.
Fire Extinguisher Technician
Fire Pro
Hurricane, UT
09.2022 - 01.2023
- Tested fire alarm systems to ensure functional operation during emergencies.
- Replaced damaged or expired fire extinguishers with new units.
- Managed inventory of fire prevention and management equipment to maintain emergency readiness.
- Developed, implemented and enhanced fire prevention and suppression policies.
Superintendent
woodcarver
Hurricane, UT
08.2020 - 09.2022
- Inspected sites before and after construction projects.
- Understood how to operate and maintain job site equipment safely and for maximum productivity.
- Learned and mastered skilled trade specialties under guidance of expert mentors.
- Scheduled deliveries of materials needed for various stages of construction.
- Measured, marked or recorded openings or distances to construction layout areas.
- Coordinated with subcontractors, such as electricians, plumbers, and carpenters to complete construction projects.
- Created a timeline outlining the duration of each stage of construction process.
- Performed demanding physical work over extended periods and modeled positive attitude.
Cabinetmaker and Installer
cuzzins cabinets
Cedar City, UT
03.2019 - 08.2020
- Adhered to safety protocols while on the job site at all times.
- Provided guidance on proper care instructions for newly installed cabinetry.
- Worked at customer locations to replace existing or install new cabinets for residential or commercial use.
- Aligned cabinets with walls for level installation using a spirit level tool.
- Adhered to project blueprints and requirements to deliver quality work.
- Removed existing cabinetry and countertops prior to new installation.
- Utilized power drills and saws to cut out openings for sinks or dishwashers when needed.
- Erected scaffolding to assemble above-ground structures.
- Inspected completed installations for accuracy before leaving job site.
Flooring Installer
shakspear
Cedar City, UT
04.2018 - 03.2019
- Worked with a variety of tools including saws, hammers, drills, screwdrivers.
- Evaluated work areas before planning flooring layout for different projects.
- Measured and cut flooring materials to fit the dimensions of each room.
- Cut flooring material to fit around obstructions using hand tools, dies and special equipment.
- Checked finished installations for accuracy and quality assurance purposes.
Tire Technician
Discount Tire
Washington, UT
06.2017 - 11.2018
- Inflated tires to prescribed PSI to meet load requirements.
- Maintained clean and professional tire bay by merchandising tire displays and automotive products.
- Identified and replaced worn tires and related components, optimizing safety.
- Balanced and mounted new tires for customers, providing detailed breakdowns of services performed.
- Recorded information about each service performed in company database.
Security Officer
Securitas Security
St George, UT
06.2017 - 08.2018
- Followed established security and safety procedures and posted orders to include enforcement of company rules, policies, and regulations.
- Reported safety hazards for remediation response.
- Verified photo IDs and tickets to allow guests passage.
- Responded to alarms and conducted investigations as required.
- Inspected security systems to maintain consistent operational availability and to detect evidence of tampering.
- Maintained accurate logs of all security related activities.
Maintenance Assistant
cottage glen
Tooele, UT
06.2015 - 09.2017
- Repaired minor damages to walls, floors and ceilings caused by wear-and-tear or vandalism.
- Conducted daily inspections of facilities to identify necessary repairs and maintenance.
- Dismantled machines, equipment, or devices to access and remove defective parts.
- Replaced worn and damaged parts to keep maintenance equipment fully functional.
- Implemented troubleshooting techniques to resolve issue.
- Repaired machines, equipment or structures using tools or equipment.
Mechanic
Scotts
, UT
05.2015 - 07.2016
- worked at my uncles shop during summer break
- Removed old oil, replaced filters, and added correct amounts of fluids.
- Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
- Inventoried stock, placed orders and verified receipt to keep supplies ready.
- Performed routine maintenance such as oil changes, tune-ups and brake repairs.
- Evaluated vehicle schematics to assess required parts and order accordingly.
- Removed, replaced, balanced and rotated new or used tires to maintain on-road safety
- Tested vehicle engines to identify malfunctions.
- Developed in-depth understanding of automotive systems and components to complete fast and accurate repairs.
Education
High School Diploma -
Standbury High
Utah05-2017
Some College (No Degree) - Generals
Dixie
UtahSkills
- I have worked around cars my whole life; my dad and uncles are mechanics, and I have always done my own repairs, and I grew up wrenching
- Engine overhauls
- Replacing parts
- Inspecting vehicles
- System repairs
- Troubleshooting and diagnosis
- Torn apart and reassembled almost everything I could
- I love learning how everything works and how to improve
- reliable, honest, quick learner, mechanically inclined
- I worked in wood shops and mastered all machines from front to back
- Cabinetry mastery
- Power tools operation
- Wood finishing techniques
- Estimate calculations
- Job bidding
- Worksite safety
- Project planning
- Materials procurement
- Drywall installation
- Construction site management
- Change order management
- Contract bidding
- Electrical systems
- Vehicle inspections
- 3D modeling
- Critical thinking
- Problem-solving
- Patience and empathy
- Welding standards
Certification
- general contractors license B-100
- osha 10
Timeline
Mechanic
Automed
09.2024 - 01.2025
Maintenance/contractor
Self Employed
08.2023 - Current
Cabinetmaker and Installer
custom finish cabinets
01.2023 - 09.2024
Fire Extinguisher Technician
Fire Pro
09.2022 - 01.2023
Superintendent
woodcarver
08.2020 - 09.2022
Cabinetmaker and Installer
cuzzins cabinets
03.2019 - 08.2020
Flooring Installer
shakspear
04.2018 - 03.2019
Tire Technician
Discount Tire
06.2017 - 11.2018
Security Officer
Securitas Security
06.2017 - 08.2018
Maintenance Assistant
cottage glen
06.2015 - 09.2017
Mechanic
Scotts
05.2015 - 07.2016
High School Diploma -
Standbury High
Some College (No Degree) - Generals
Dixie
Similar Profiles
Rebecca HeadlandRebecca Headland
Small business owner at self employedSmall business owner at self employed
Joseph CruzJoseph Cruz
Mover at Self EmployedMover at Self Employed
Damian RasmussenDamian Rasmussen
Skilled Gardner at Self EmployedSkilled Gardner at Self Employed
Vinny WoodVinny Wood
Barber at self employedBarber at self employed
Cathleen VanasseCathleen Vanasse
Sales Associate at Dixie NutritionSales Associate at Dixie Nutrition