Michel López

• Conducted regular inspections of engineering facilities to identify any necessary repairs or upgrades. • Led design reviews to ensure accuracy and completeness of project designs prior to construction or installation activities. • Analyzed data from tests conducted on various types of equipment or components for quality control purposes. • Maintained accurate records regarding all work performed by the engineering department. • Evaluated existing processes on an ongoing basis in order to identify opportunities for improvements. • Resolved complex problems associated with operating equipment or systems through root cause analysis techniques. • Trained new staff members on proper use and maintenance procedures for engineering systems. • Negotiated contracts with outside vendors pertaining to repair services or supplies needed by the engineering department. • Managed the daily operations of a team of engineers, technicians, and other personnel in the engineering department. • Developed preventive maintenance plans for all mechanical, electrical, and plumbing systems. • Collaborated closely with other departments to coordinate activities that impact engineering operations. • Monitored performance of equipment and identified potential issues to ensure operational reliability. • Ensured compliance with safety regulations, codes, and standards related to the operation of a power plant. • Responded promptly to emergency situations involving critical infrastructure components. • Collaborated with other departments to ensure timely completion of projects within budget constraints. • Managed vendor relationships by negotiating contracts and monitoring performance metrics. • Provided technical guidance and support to staff members concerning engineering projects or initiatives. • Developed and implemented plans for routine preventive maintenance. • Identified facility deficiencies, incorporating repair actions into maintenance procedures schedule. • Supervised engineering and maintenance staff and facilitated hiring, training and personal development. • Meticulously kept records of building rounds, engineering logs and data sheets. • Administered hands-on instruction in basic maintenance, safety and troubleshooting procedures. • Oversaw maintenance and continuous operation of building systems, including mechanical (HVAC), electrical and safety. • Oversaw activities of contractors working within building and on job sites. • Completed all maintenance and repair actions with little oversight to minimize downtime. • Kept engine rooms clean and ready for inspection by internal and external authorities. • Maintained complete records of engineering department activities. • Complied with all applicable regulations, including port requirements and U.S. Coast Guard standards. • Monitored engine, machinery or equipment indicators to report abnormalities to appropriate shipboard staff.

• Scheduled and coordinated preventative maintenance activities to ensure equipment reliability.

• Monitored and evaluated the performance of personnel in the maintenance department, providing guidance and coaching when necessary.

• Investigated customer complaints about product quality issues due to malfunctioning equipment.

• Ordered replacement parts as required to keep machines running efficiently.

• Ensured that safety regulations were followed by employees while performing maintenance tasks.

• Conducted regular inspections of all equipment in the facility to identify any potential problems before they became serious issues.

• Assisted in training new hires on proper operation and maintenance techniques for various types of machinery.

• Analyzed current procedures used by technicians during repairs and installations, making recommendations for improvements where applicable.

• Maintained accurate records of all maintenance activities performed.

• Reviewed work orders, allocated resources, assigned tasks, and established priorities for completion of jobs.

• Worked closely with vendors and suppliers to purchase spare parts at competitive prices.

• Negotiated contracts with vendors and suppliers to secure cost-effective services.

• Developed and implemented a comprehensive preventive maintenance program for all production machinery.

• Supervised technicians on repair and installation of machines or systems according to manufacturer's specifications.

• Coordinated with vendors and contractors to ensure timely completion of projects.

• Established a system for tracking labor costs associated with each job completed by the team.

• Researched new products or services that would enhance the company's ability to maintain its competitive edge in the industry.

• Developed and implemented safety procedures to ensure compliance with OSHA regulations.

• Maintained records of repairs and parts inventory usage to optimize future planning efforts.

• Coordinated emergency repairs as needed in order to minimize disruption in production schedules.

• Oversaw team in completing job tasks quickly and accurately with appropriate use of instruments and tools.

• Implemented improved training procedures to better develop new personnel.

• Collected data to compile detailed reports for upper management and closely monitored equipment, tools and system upgrades.

• Delegated daily tasks to employees to manage resources and meet deadlines.

• Maintained clear and safe workspace areas to meet OSHA standards.

• Repaired equipment and machinery, performing maintenance according to updated industry standards.

• Coordinated with external contractors for specialized maintenance projects.

• Monitored inventory and ordered needed supplies to meet demand for repairs.

• Scheduled repair and maintenance of machines, tools and equipment to support continuous production operations.

• Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.

• Minimized severity or frequency of accidents of contractors and maintenance personnel using risk identification process.

• Delegated work to staff, setting priorities and goals.

• Delivered positive reinforcement and constructive criticism for employee work efforts.

• Maintained optimal supply levels to meet expected demands without overreaching budget targets.

• Coached staff on strategies to enhance performance and improve customer relations.

• Prepared and planned worksites to help jobs run smoothly.

• Implemented onsite safety protocols and procedures and properly trained team members on prevention measures.

• Kept records of parts and equipment used in projects to update inventory.

• Created work crew schedules and delegated assignments.

• Filled out work orders, repair logs and maintenance plans to document work completed.

• Ensured proper functioning of facility's HVAC system by performing regular maintenance checks.

• Trained junior technicians on best practices for machine operation and repair.

• Adjusted machine settings according to manufacturing specifications.

• Calibrated instruments used in testing processes to ensure accuracy of results.

• Cleaned work areas to maintain a safe environment free from debris or hazardous materials.

• Monitored inventory levels of replacement parts and supplies needed for repairs.

• Provided technical support to production staff for machine troubleshooting needs.

• Conducted regular safety checks to ensure compliance with OSHA standards.

• Performed preventive maintenance tasks, including lubrication and cleaning of machines and equipment.

• Diagnosed mechanical problems using visual inspections and test instruments.

• Followed established safety procedures when operating heavy machinery.

• Replaced defective parts such as bearings, seals, gears, valves.

• Routinely inspected plant equipment for signs of wear or malfunctioning parts.

• Maintained accurate records of all maintenance activities performed.

• Responded promptly to emergency breakdowns at any time during shift hours.

• Assisted in the installation of new machinery and equipment.

• Installed new pumps, compressors, boilers and other mechanical systems.

• Worked closely with engineering team to develop innovative solutions for existing problems.

• Repaired or replaced faulty wiring, switches, relays, and other electrical components.

• Conducted electrical repairs on motors, lighting systems, and other related components.

• Read and interpreted equipment and work orders to properly perform required maintenance services.

• Installed new systems, replacement parts, and components to maintain proper operation.

• Changed HVAC filters and cleaned condensation drains to perform preventive maintenance on HVAC systems.

• Checked electrical components to identify defects and hazards and make necessary adjustments.

• Collaborated with building managers to assess ongoing needs and plan preventive maintenance schedules.

• Cleared clogged drains and replaced valves, faucets, and fixtures.

• Responded to personnel queries and troubleshooting requests to provide repair services to improve operations.

• Scheduled preventive maintenance programs to keep equipment in good working condition.

• Completed basic carpentry tasks and installed shelves, hooks, and closet rods to meet customer needs.

• Implemented diagnostics to identify failures, determine parts and material requirements and facilitate repairs.

• Disassembled appliances to diagnose problems and facilitate repairs.

• Maintained clear and safe workspace areas to meet OSHA standards.

• Operated hand and power tools to complete repairs.

• Replaced wall sockets, ran lines and completed basic carpentry to finish installations.

• Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.

• Implemented troubleshooting techniques to resolve issue.

• Routinely inspected equipment for preventive and emergency maintenance needs.

• Cleaned or lubricated shafts, bearings or other parts of machinery.

• Performed routine maintenance by inspecting drives, motors or belts.

• Inspected, operated or tested machinery or equipment to diagnose machine malfunctions.

• Aligned and balanced new equipment after installation.

• Ensured proper functioning of facility's HVAC system by performing regular maintenance checks.

• Trained junior technicians on best practices for machine operation and repair.

• Adjusted machine settings according to manufacturing specifications.

• Cleaned work areas to maintain a safe environment free from debris or hazardous materials.

• Calibrated instruments used in testing processes to ensure accuracy of results.

• Monitored inventory levels of replacement parts and supplies needed for repairs.

• Provided technical support to production staff for machine troubleshooting needs.

• Conducted regular safety checks to ensure compliance with OSHA standards.

• Performed preventive maintenance tasks, including lubrication and cleaning of machines and equipment.

• Diagnosed mechanical problems using visual inspections and test instruments.

• Followed established safety procedures when operating heavy machinery.

• Replaced defective parts such as bearings, seals, gears, valves.

• Developed preventative maintenance plans for various types of machinery.

• Routinely inspected plant equipment for signs of wear or malfunctioning parts.

• Maintained accurate records of all maintenance activities performed.

• Responded promptly to emergency breakdowns at any time during shift hours.

• Assisted in the installation of new machinery and equipment.

• Installed new pumps, compressors, boilers and other mechanical systems.

• Worked closely with engineering team to develop innovative solutions for existing problems.

• Repaired or replaced faulty wiring, switches, relays, and other electrical components.

• Troubleshot complex electrical and mechanical issues with minimal downtime.

• Conducted electrical repairs on motors, lighting systems, and other related components.

• Conducted performance and safety inspections on equipment and machinery to maintain operational baseline.

• Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.

• Read and interpreted equipment and work orders to properly perform required maintenance services.

• Installed new systems, replacement parts, and components to maintain proper operation.

• Changed HVAC filters and cleaned condensation drains to perform preventive maintenance on HVAC systems.

• Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities.

• Checked electrical components to identify defects and hazards and make necessary adjustments.

• Collaborated with building managers to assess ongoing needs and plan preventive maintenance schedules.

• Cleared clogged drains and replaced valves, faucets, and fixtures.

• Responded to personnel queries and troubleshooting requests to provide repair services to improve operations.

• Scheduled preventive maintenance programs to keep equipment in good working condition.

• Completed basic carpentry tasks and installed shelves, hooks, and closet rods to meet customer needs.

• Implemented diagnostics to identify failures, determine parts and material requirements and facilitate repairs.

• Disassembled appliances to diagnose problems and facilitate repairs.

• Maintained clear and safe workspace areas to meet OSHA standards.

• Operated hand and power tools to complete repairs.

• Replaced wall sockets, ran lines and completed basic carpentry to finish installations.

• Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.

• Implemented troubleshooting techniques to resolve issue.

• Routinely inspected equipment for preventive and emergency maintenance needs.

• Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.

• Dismantled machines, equipment, or devices to access and remove defective parts.

• Cleaned or lubricated shafts, bearings or other parts of machinery.

• Assembled, installed or repaired electrical or electronic components and pipe systems.

• Repaired machines, equipment or structures using tools or equipment.

• Performed routine maintenance by inspecting drives, motors or belts.

• Inspected, operated or tested machinery or equipment to diagnose machine malfunctions.

• Ordered parts, supplies or equipment from catalogs or suppliers.

• Adjusted devices or control instruments using hand tools, levels or straightedges.

• Designed equipment to aid repair or maintenance of machines, mechanical equipment or building structures.

• Estimated costs to repair machinery, equipment or building structures.

• Recorded type and cost of maintenance or repair work.

• Set up and operated machine tools to repair or fabricate jigs, fixtures or tools.

• Diagnosed and corrected mechanical problems using blueprints, repair manuals or parts catalogs.

• Maintained or repaired specialized equipment or machinery.

• Planned and laid out repair work using diagrams, drawings or schematic diagrams.

• Aligned and balanced new equipment after installation.